DIRECTV Universal Remote Control User Manual (Models RC32, RC64, RC64L, RC65)

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your DIRECTV Universal Remote Control. Designed for ease of use, this remote is compatible with various DIRECTV receivers and televisions, offering a convenient way to manage your entertainment system.

Product Features

• High-quality construction for reliable performance.
• Easy-to-use keys with a multi-colored keypad for intuitive navigation.
• Universal compatibility with various DIRECTV receivers and televisions.
• Infrared connectivity for broad device support.

Setup

1. Battery Installation

Before using your remote control, you must install two AA batteries (not included).

1. Locate the battery compartment on the back of the remote control.
2. Press down on the tab and slide the battery cover off.
3. Insert two AA batteries, matching the (+) and (-) terminals as indicated inside the compartment.
4. Replace the battery cover, ensuring it clicks securely into place.

Note: Always use fresh batteries and replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.

2. Programming the Remote Control

Your DIRECTV Universal Remote Control can be programmed to operate your DIRECTV receiver and up to two other devices, such as a TV, DVD player, or audio receiver. There are typically two methods for programming:

Method A: Code Entry (Recommended)

1. Turn on the device you wish to program (e.g., your TV).
2. Press and hold the MUTE button and the SELECT button simultaneously until the green light at the top of the remote flashes twice.
3. Enter the 5-digit programming code for your device brand. (Refer to the DIRECTV website or your device's manual for a list of codes.)
4. Point the remote at the device and press the POWER button once. If the device turns off, the remote is programmed.
5. If the device does not turn off, repeat steps 2-4 with the next code for your brand.
6. Once programmed, press the SELECT button to save the setting. The green light will flash twice.

Method B: Auto Code Search

1. Turn on the device you wish to program.
2. Press and hold the MUTE button and the SELECT button simultaneously until the green light at the top of the remote flashes twice.
3. Press the CHANNEL UP button repeatedly (slowly) while pointing the remote at the device. Stop when the device turns off.
4. Press the SELECT button to save the setting. The green light will flash twice.

For specific device codes or advanced programming, please visit the official DIRECTV support website or consult your DIRECTV receiver manual.

Operating the Remote Control

This section outlines the basic functions of your DIRECTV Universal Remote Control.

Image: Front view of the DIRECTV Universal Remote Control, highlighting the layout of its multi-colored keypad and function buttons.

• POWER: Turns the selected device on or off.
• TV/DIRECTV/AUX: Selects the device you want to control. Press the corresponding button (TV, DIRECTV, AUX) to switch control to that device.
• VOLUME UP/DOWN: Adjusts the volume of the TV or audio receiver.
• CHANNEL UP/DOWN: Changes channels on the DIRECTV receiver.
• MUTE: Mutes or unmutes the audio.
• GUIDE: Displays the DIRECTV program guide.
• MENU: Accesses the main menu of the DIRECTV receiver.
• SELECT: Confirms selections or enters menus.
• ARROW BUTTONS (UP/DOWN/LEFT/RIGHT): Navigates through menus and guides.
• RECORD: Records the current program (requires a compatible DIRECTV DVR).
• PLAY/PAUSE/STOP/REW/FF: Controls playback of recorded content or live TV (requires a compatible DIRECTV DVR).
• NUMBER PAD (0-9): Enters channel numbers directly.

Maintenance

Proper care will extend the life of your remote control.

• Cleaning: Use a soft, dry cloth to clean the remote. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals or abrasive cleaners.
• Battery Replacement: Replace batteries when the remote's indicator light no longer flashes or when the remote becomes unresponsive. Dispose of used batteries according to local regulations.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter issues with your remote control, try the following solutions:

1. Remote is not responding:
   • Check if the batteries are installed correctly with the correct polarity.
   • Replace the batteries with fresh ones.
   • Ensure there are no obstructions between the remote and the device's infrared sensor.
   • Make sure you have selected the correct device mode (TV, DIRECTV, AUX) on the remote.
2. Device is not responding to commands:
   • Verify that the remote is programmed correctly for the device. Try reprogramming it using the code entry or auto-search method.
   • Ensure the device itself is powered on and functioning correctly.
   • Check the range; the remote has a maximum range of 10 meters (approximately 33 feet).
3. Some buttons work, but others do not:
   • This might indicate a partial programming issue. Try reprogramming the remote for the specific device again.
   • Ensure the buttons are not stuck or dirty.

If problems persist, contact DIRECTV customer support for further assistance.

Specifications

Warranty and Support

This DIRECTV Universal Remote Control is designed for durability and reliable performance. For specific warranty information, please refer to the documentation provided with your DIRECTV receiver or contact DIRECTV customer service directly.

For technical support, programming assistance, or to find the latest device codes, please visit the official DIRECTV support website or contact their customer service department.

Please retain your purchase receipt for warranty purposes.