Introduction
Thank you for purchasing the Vivitar VBTE20151 Infinite Bluetooth Earphone. This manual provides essential information for the safe and efficient use of your new wireless earphones. Please read these instructions carefully before use and retain them for future reference.
Product Overview
The Vivitar VBTE20151 earphones are designed for wireless audio playback and hands-free communication. They feature a lightweight, in-ear design with secure fit hooks for comfortable wear.
Image: Front view of the Vivitar VBTE20151 Infinite Bluetooth Earphone, showcasing its black color and in-ear design with ear hooks.
Image: The Vivitar VBTE20151 Infinite Bluetooth Earphone displayed in its retail packaging, highlighting key features like Bluetooth technology, secure fit hooks, and built-in microphone.
Components:
- Left Earbud
- Right Earbud
- Control Panel (typically on one earbud or inline, with power/play/pause, volume buttons)
- Microphone
- Charging Port (Micro USB)
Setup
1. Charging the Earphones
Before first use, fully charge the earphones. Connect the provided USB charging cable to the charging port on the earphones and to a USB power source (e.g., computer USB port, USB wall adapter). The indicator light will typically show red during charging and turn off or blue when fully charged. Charging time may vary.
2. Powering On/Off
- To Power On: Press and hold the Multi-function button (often the power button) for approximately 3-5 seconds until the indicator light flashes blue and a voice prompt confirms "Power On".
- To Power Off: Press and hold the Multi-function button for approximately 3-5 seconds until the indicator light flashes red and a voice prompt confirms "Power Off".
3. Bluetooth Pairing
To connect your earphones to a Bluetooth-enabled device (smartphone, tablet, etc.):
- Ensure the earphones are powered off.
- Place the earphones within 1 meter (3 feet) of your device.
- Press and hold the Multi-function button for approximately 5-7 seconds until the indicator light flashes red and blue alternately. This indicates pairing mode.
- On your device, go to Bluetooth settings and enable Bluetooth.
- Search for available devices. The earphones should appear as "Vivitar VBTE20151" or a similar name.
- Select the earphones from the list to connect. Once paired, the indicator light will typically flash blue slowly, and a voice prompt will confirm "Connected".
- If prompted for a password, enter "0000".
The earphones will automatically attempt to reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.
Operating Instructions
Music Playback:
- Play/Pause: Press the Multi-function button once.
- Next Track: Press and hold the Volume Up (+) button.
- Previous Track: Press and hold the Volume Down (-) button.
- Volume Up: Press the Volume Up (+) button briefly.
- Volume Down: Press the Volume Down (-) button briefly.
Call Management:
- Answer Call: Press the Multi-function button once.
- End Call: Press the Multi-function button once during a call.
- Reject Call: Press and hold the Multi-function button for approximately 2 seconds.
- Redial Last Number: Double-press the Multi-function button.
Maintenance
Cleaning:
- Wipe the earphones with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, solvents, or spray cleaners.
- Keep the charging port free of dust and debris.
Storage:
- Store the earphones in a cool, dry place away from extreme temperatures.
- Avoid storing in direct sunlight or in humid environments.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earphones do not power on. | Low battery. | Charge the earphones fully. |
| Cannot pair with device. | Earphones not in pairing mode; device Bluetooth off; too far from device. | Ensure earphones are in pairing mode (flashing red/blue). Turn on device Bluetooth. Move earphones closer to device. Forget previous pairings on device and try again. |
| No sound or low volume. | Volume too low on earphones or device; earphones not connected properly. | Increase volume on both earphones and device. Re-pair the earphones. |
| Intermittent connection. | Too far from device; interference. | Move closer to the paired device. Avoid obstacles between earphones and device. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | VBTE20151 |
| Brand | Vivitar |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Form Factor | In Ear |
| Color | Black |
| Control Type | Media Control |
| Item Weight | 2.39 ounces |
| UPC | 681066989296 |
| Manufacturer | Sakar International, Inc. |
Safety Information
- Do not expose the earphones to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the earphones to strong impacts.
- Do not attempt to disassemble or modify the earphones. This will void the warranty and may cause damage.
- Keep out of reach of children.
- Listen at moderate volumes to prevent hearing damage. Prolonged exposure to loud sounds can cause permanent hearing loss.
- Do not use earphones while driving, cycling, or in situations where inability to hear ambient sounds could be dangerous.
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Vivitar website. Please have your model number (VBTE20151) and proof of purchase ready when contacting support.
