Intex 25007RP
Intex Replacement Hose Adapter A with Collar User Manual
Model: 25007RP
Product Overview
The Intex Replacement Hose Adapter A with Collar (Model 25007RP) is a genuine Intex OEM replacement part designed to ensure the safe and proper operation of your pool system. This adapter facilitates the conversion of threaded hoses to clamp-style hoses, supporting both 1.5-inch and 1.25-inch hose connections for various Intex pool sets. It is compatible with Intex filter pumps (4000, 2500, 2000, and 1500 gallons per hour) that utilize threaded hose connections, as well as Intex chlorine generators and salt systems with similar threaded connections.
Image: The Intex Replacement Hose Adapter A with Collar, showing its grey plastic construction and threaded connection point.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | 25007RP |
| Brand | Intex |
| Material | Plastic |
| Color | Gray |
| Connector Type | Adapter |
| Thread Size | 1.25 inch |
| Item Weight | 3.52 Ounces |
| Number of Pieces | 2 (Pair) |
| UPC | 078257250073 |
Installation Guide
The Intex Replacement Hose Adapter A is designed to convert threaded hose connections on your Intex pool equipment to accommodate smaller, clamp-style hoses (1.5-inch and 1.25-inch diameter). This is particularly useful when connecting accessories or pumps that have different hose connection types.
Steps for Installation:
- Prepare Your Equipment: Ensure your pool pump, filter, or other Intex equipment is turned off and disconnected from power. If working with a pool, ensure water flow is stopped or valves are closed to prevent water loss.
- Identify Connection Points: Locate the threaded connection point on your Intex pump, chlorine generator, or salt system where you intend to attach the adapter.
- Attach the Adapter: Take one Intex Replacement Hose Adapter A. The larger, threaded end of the adapter will screw directly onto the threaded outlet/inlet of your pool equipment. Hand-tighten the collar securely to ensure a watertight seal. Do not overtighten.
- Connect the Hose: The other end of the adapter features stepped diameters (1.5-inch and 1.25-inch) designed for clamp-style hoses. Slide your smaller diameter hose onto the appropriate step of the adapter.
- Secure with Clamp: Use a hose clamp (not included with adapter, typically supplied with your hose or accessory) to firmly secure the hose to the adapter. Ensure the clamp is tight enough to prevent leaks but not so tight as to damage the hose or adapter.
- Verify Connection: Once installed, visually inspect all connections for proper seating. Slowly restore water flow to the system and check for any leaks. If leaks occur, re-tighten connections as needed.
Image: The Intex Adapter A securely attached to the outlet of a pool pump, ready for hose connection.
Image: A closer view of the Intex Adapter A, highlighting its connection to the pool pump and the hose attachment point.
Operation
Once the Intex Replacement Hose Adapter A is correctly installed, its operation is seamless. It acts as a passive connector, allowing water to flow between your pool equipment and hoses of different diameters. No specific operational steps are required for the adapter itself beyond ensuring a secure, leak-free connection.
Maintenance
To ensure the longevity and optimal performance of your Intex Replacement Hose Adapter A, follow these simple maintenance guidelines:
- Regular Inspection: Periodically inspect the adapter for any signs of wear, cracks, or damage. Check the O-rings for deterioration, which can lead to leaks.
- Cleanliness: Keep the adapter clean from debris, dirt, or chemical buildup. A soft cloth and mild soap can be used for cleaning. Rinse thoroughly with fresh water.
- Storage: During off-season or prolonged periods of non-use, disconnect the adapter from your pool equipment and hoses. Clean it thoroughly, allow it to dry completely, and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- O-Ring Care: If O-rings appear dry or cracked, replace them to maintain a proper seal. A thin layer of silicone lubricant can help prolong their life and ease installation.
Troubleshooting
Most issues with the Intex Replacement Hose Adapter A are related to leaks or improper connection. Here are some common troubleshooting steps:
- Leaks at Connection Points:
- Ensure the threaded collar is hand-tightened securely.
- Check the O-rings for proper seating, damage, or wear. Replace if necessary.
- Verify that the hose clamp is tightened sufficiently on the clamp-style hose connection.
- Hose Not Fitting:
- Confirm that your hose is either 1.5-inch or 1.25-inch in diameter, as these are the sizes the adapter is designed for.
- Ensure you are sliding the hose onto the correct stepped diameter on the adapter.
- Reduced Water Flow:
- While unlikely to be caused by the adapter itself, ensure no debris is lodged within the adapter restricting water flow.
- Check your pump's filter and other system components for blockages or issues.
Warranty and Support
This product is a replacement part and comes with No Applicable Warranty as per manufacturer specifications. For general product inquiries or assistance with other Intex products, please refer to the official Intex website or contact their customer support directly.