Bose Solo 15 Series II TV Sound System User Manual

1. Introduction

The Bose Solo 15 Series II TV Sound System is designed to enhance your television audio experience. This one-piece speaker system delivers clear dialogue, a wide soundstage, and deep bass, significantly improving upon standard TV speakers. Its compact design allows for placement under most TVs up to 50 inches or on an open shelf. The system also features Bluetooth connectivity for wireless music streaming and includes a universal remote control for simplified operation of multiple devices.

Bose Solo 15 Series II TV Sound System and remote control

Image: The Bose Solo 15 Series II TV Sound System, a black sound base unit, shown with its accompanying universal remote control.

2. What's in the Box

Verify that all components are present before proceeding with setup:

Bose Solo 15 Series II TV sound system
Universal remote control
Power cord
Optical digital audio cable
Analog cable
2 AA batteries (for remote control)

3. Setup

3.1 Placement

The Solo 15 Series II system is designed to be placed directly under your television or on an open shelf. Ensure the placement does not obstruct the sound system's speakers or your TV's infrared (IR) sensor.

Bose Solo 15 Series II placed under a television

Image: The Bose Solo 15 Series II TV Sound System positioned beneath a television, demonstrating typical placement.

3.2 Connecting to Your TV

Connect the sound system to your TV using one of the following methods:

Optical Digital Audio Cable (Recommended): Connect one end of the optical cable to the OPTICAL IN port on the sound system and the other end to the OPTICAL OUT port on your TV.
Analog Cable: If your TV does not have an optical output, use the provided analog cable. Connect one end to the AUDIO IN port on the sound system and the other end to the AUDIO OUT ports (red and white) on your TV.

Important: After connecting, ensure your TV's internal speakers are turned off or muted to prevent echo or distorted sound. Refer to your TV's user manual for instructions on disabling internal speakers.

3.3 Power Connection

Connect the power cord to the POWER input on the sound system, then plug the other end into a working AC power outlet.

4. Operating the System

4.1 Universal Remote Control

The included universal remote control allows you to operate the Solo 15 Series II system and other connected devices (TV, cable box, Blu-ray player). Install the two AA batteries into the remote before first use.

Close-up of the Bose universal remote control

Image: A detailed view of the Bose universal remote control, highlighting its various buttons for controlling the sound system and other devices.

To program the remote for other devices, refer to the detailed instructions in the full user manual or the Bose support website. The remote's volume buttons exclusively control the Bose system's volume.

4.2 Adjusting Audio Settings

Dialogue Mode: Press the Dialogue button on the remote to enhance vocal clarity, making speech easier to understand, especially during movies or TV shows with complex soundtracks.
Bass Adjustment: Use the Bass button on the remote to increase or decrease the bass level. The system provides visual feedback (LED indicators) to show the current bass setting.

4.3 Bluetooth Connectivity

The Solo 15 Series II system supports wireless audio streaming via Bluetooth from compatible devices (e.g., smartphones, tablets).

Press the Bluetooth button on the remote control. The Bluetooth indicator on the sound system will blink.
On your mobile device, enable Bluetooth and select "Bose Solo 15 II" from the list of available devices.
Once connected, the indicator on the sound system will glow solid blue, and you can stream audio wirelessly.

5. Maintenance

5.1 Cleaning

Clean the surface of the sound system with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure the system is unplugged before cleaning.

5.2 Battery Replacement (Remote)

When the remote control's performance degrades, replace the two AA batteries with new ones. Ensure correct polarity when inserting batteries.

6. Troubleshooting

Problem	Possible Solution
No sound from the system.	Ensure the power cord is securely connected and the system is powered on. Verify the audio cable (optical or analog) is correctly connected to both the TV and the sound system. Check that the correct input source is selected on the sound system (e.g., TV input). Confirm your TV's internal speakers are disabled or muted. Increase the volume on both the sound system and your TV.
Sound is distorted or has an echo.	Ensure your TV's internal speakers are completely turned off. Check audio cable connections for looseness or damage.
Remote control not working.	Replace the batteries with new AA batteries. Ensure there are no obstructions between the remote and the sound system. Verify the remote is pointed directly at the sound system.
Bluetooth device cannot connect.	Ensure the sound system is in Bluetooth pairing mode (blinking indicator). Make sure Bluetooth is enabled on your mobile device. Move your mobile device closer to the sound system. Try unpairing and re-pairing the device.

7. Specifications

Feature	Detail
Model Name	Solo 15 Series II
Model Number	740928-1110
Dimensions (H x W x D)	3 x 24.8 x 14 inches (7.6 x 63 x 35.6 cm)
Weight	12 pounds (5.44 kg)
Connectivity Technology	Optical audio input (digital), Analog audio input, Bluetooth
Supported Audio Formats	Dolby Digital, DTS
Included Components	Sound system, Universal remote, Power cord, Optical digital audio cable, Analog cable
Power Requirement	AC (region specific)

Image: Diagram showing the dimensions of the Bose Solo 15 Series II TV Sound System: 3 inches high, 24.8 inches wide, and 14 inches deep.

8. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Bose website. For technical support, product registration, or to access additional resources, please visit www.bose.com/support.