Product Overview
Thank you for choosing the Aigostar Retro Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read it thoroughly before installation and operation, and retain it for future reference.
The Aigostar Retro Table Lamp is designed for versatility and ease of use, featuring an adjustable neck and a compact design suitable for various environments such as reading, bedside, study, or office desks.
Image: Aigostar Retro Table Lamp, showcasing its design and silver finish.
Setup Instructions
- Unpack the Lamp: Carefully remove all components from the packaging. Ensure all parts are present and undamaged.
- Install the Bulb: This lamp requires an E27 type bulb (not included). Screw the E27 bulb into the lamp holder until it is secure. Do not overtighten.
- Position the Lamp: Place the lamp on a stable, flat surface. The compact base (13.5 cm diameter) is designed to save space.
- Connect to Power: Plug the power cord into a suitable electrical outlet. The lamp features a 153 cm long cable with an integrated on/off switch.
Image: The lamp's E27 bulb base, illustrating the type of bulb required. Bulbs are not included.
Image: Dimensional diagram of the lamp, including the cord length and switch location.
Operating Instructions
- Turning On/Off: Use the push-button switch located on the power cord to turn the lamp on or off.
- Adjusting the Light Angle: The lamp features a flexible gooseneck and an anti-scald adjustment metal bar. Gently bend the gooseneck to direct the light as needed. Use the metal bar to adjust the lampshade angle without touching the hot shade.
Image: The anti-scald adjustment metal bar, designed for safe angle adjustments.
Image: Illustrations of the lamp's completely adjustable head, 360-degree flexible swan neck, and sturdy base.
Maintenance
- Cleaning: Disconnect the lamp from the power supply before cleaning. Use a soft, dry cloth to wipe the lamp. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down completely before attempting to replace it. Unscrew the old bulb and screw in a new E27 type bulb.
- Heat Dissipation: The lamp is designed with excellent heat dissipation features. Ensure that the ventilation holes on the lampshade are not obstructed to prevent overheating.
Image: Illustration of the lamp's heat dissipation design, emphasizing the importance of clear ventilation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on |
|
|
| Light flickers |
|
|
| Lamp overheats |
|
|
Specifications
- Brand: Aigostar
- Model Number: 182236
- Product Dimensions: 12.5 x 13.5 x 28 cm (approximate, as per product data); 860 g
- Finish: Silver-colored
- Certifications: CE, RoHS
- Batteries Required: No
- Components Included: Aigostar Table Lamp (E27, Max 11W), 1.5m cable with switch (Bulb not included)
- Lamp Base: E27
- Base Material: Metal
- Lampshade Material: Alloy steel
- Switch Type: Push button (on cord)
- Style: Retro
Warranty Information
Specific warranty details for the Aigostar Retro Table Lamp are typically provided with your purchase documentation or can be found on the manufacturer's official website. Please refer to these resources for comprehensive warranty terms and conditions.
Customer Support
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact your retailer or the Aigostar customer service department. Contact information can usually be found on the product packaging or the official Aigostar website.
