1. Product Overview
The DJI Remote Controller Monitor Hood is designed to shield your tablet device from direct sunlight, providing a clearer view of your display during drone operation. This accessory is collapsible for easy transport and storage, and is specifically designed for use with DJI Inspire 1 and Phantom 3 Advanced/Professional remote controllers.
Key Features:
- Original DJI Mini Tablet Sun Shade. Compatible with iPad Mini and majority of small-form factor tablet devices.
- Mini Tablet's Maximum device size: 205mm*145mm*128mm - 8" x 5.5" X 5.
- Shields your tablets from direct sunlight to give you a perfectly clear view of your display.
- Collapsible and easy to carry.
- Can be installed on the remote controllers for Inspire 1 and P3 Advanced/Professional.
Figure 1.1: The DJI Remote Controller Monitor Hood in its open, ready-to-use configuration. This image shows the hood's black interior designed to absorb light and its white exterior.
Figure 1.2: The DJI Remote Controller Monitor Hood folded flat, demonstrating its collapsible design for convenient storage and portability.
2. Compatibility
This monitor hood is designed for optimal compatibility with the following devices and remote controllers:
- Tablet Devices: Compatible with iPad Mini and the majority of small-form factor tablet devices.
- Maximum Device Dimensions: 205mm (length) x 145mm (width) x 128mm (height) or approximately 8 inches x 5.5 inches x 5 inches.
- Remote Controllers: Designed for use with DJI Inspire 1 and Phantom 3 Advanced/Professional remote controllers.
Note: Ensure your tablet's dimensions, especially with any protective cases, fall within the specified maximum dimensions for proper fit and functionality.
3. Setup and Installation
Follow these steps to properly set up and install the monitor hood on your remote controller:
- Unfold the Hood: Gently unfold the monitor hood from its collapsed state. The internal Velcro strips will help the hood take its cubic shape. Ensure all sides are properly aligned and secured by the Velcro.
- Attach to Remote Controller: Position the monitor hood over the tablet holder on your DJI Inspire 1 or Phantom 3 Advanced/Professional remote controller. The hood is designed to sit securely on the existing tablet mount.
- Insert Tablet: Carefully slide your compatible tablet into the hood. The tablet should fit snugly within the hood's dimensions.
- Secure Tablet: Use the remote controller's tablet clamp to secure the tablet firmly in place. The hood will be held in position by the tablet and the controller's mount.
- Connect Cables: Utilize the cutouts on the sides of the hood to access your tablet's charging port or data cable port (e.g., USB or Lightning). Connect the necessary cable to link your tablet to the remote controller.
Figure 3.1: The monitor hood attached to a DJI remote controller, with a tablet inserted. This illustrates the hood's integration with the controller's tablet mount.
Figure 3.2: A side view of the monitor hood on the remote controller, highlighting the cutouts designed for easy access to tablet ports for cable connections.
4. Operating Instructions
Once installed, the monitor hood enhances your viewing experience in bright conditions:
- Glare Reduction: The hood's design and dark interior significantly reduce glare and reflections on your tablet screen caused by direct sunlight.
- Optimal Viewing Angle: Position yourself and the remote controller to maximize the hood's effectiveness. While the hood greatly reduces glare, extreme angles or direct sunlight from behind may still cause some reflections.
- Accessibility: The side cutouts allow for continuous connection of your tablet to the remote controller, ensuring uninterrupted data flow and power if needed.
The collapsible nature of the hood allows for quick setup and breakdown, making it convenient for on-the-go drone operations.
5. Maintenance
To ensure the longevity and optimal performance of your monitor hood, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth to wipe down the exterior and interior surfaces of the hood. Avoid abrasive cleaners or solvents that could damage the material.
- Storage: When not in use, collapse the hood flat for compact storage. Store it in a dry, cool place away from direct sunlight and extreme temperatures to prevent material degradation.
- Handling: Handle the hood with care, especially when folding and unfolding, to avoid bending or creasing the material excessively, which could affect its structural integrity.
6. Troubleshooting
If you encounter issues with your monitor hood, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Tablet does not fit inside the hood. | Tablet dimensions (especially with a case) exceed the hood's maximum capacity. | Verify your tablet's dimensions against the hood's specifications (205mm x 145mm x 128mm). Remove bulky cases if necessary. |
| Hood does not stay open or collapses easily. | Velcro strips are not fully engaged or are worn. | Ensure all internal Velcro strips are firmly pressed together to secure the hood's shape. If worn, consider replacing the hood. |
| Glare is still present despite using the hood. | Extreme lighting conditions or reflections from other surfaces. | Adjust your position relative to the sun. While the hood significantly reduces glare, it may not eliminate all reflections in very bright or specific lighting scenarios. |
| Difficulty connecting cables through side cutouts. | Tablet port location is not aligned with the cutouts, or cable connector is too large. | Ensure the tablet is correctly seated. Some tablet models may have slightly different port placements; the cutouts are designed for common central port locations. |
7. Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 8.19 x 0.98 x 6.22 inches (unfolded, approximate) |
| Item Weight | 2.2 pounds |
| Model Number | 11563 |
| Brand | DJI |
| Color | Black (interior), White (exterior) |
| Compatible Devices | Tablets (iPad Mini and similar small-form factor devices) |
| Form Factor | Cover / Hood |
| Shell Type | Soft (collapsible) |
| Date First Available | July 18, 2015 |
8. Warranty and Support
For information regarding warranty coverage, technical support, or service for your DJI Remote Controller Monitor Hood, please refer to the official DJI website or contact DJI customer service directly.
Official DJI Website: www.dji.com
DJI Store on Amazon: Visit the DJI Store
Please have your product model number (11563) and purchase details available when contacting support.
