1. Product Overview
The Varathane Premium Fast Dry Wood Stain is an oil-based, high-performance wood stain designed for interior wood projects. It features nano pigment particles for rich color quality and enhanced wood grain highlighting. This stain offers one-coat coverage and dries to the touch in approximately one hour, eliminating the need for a pre-stain or wood conditioner on most wood types.
This manual provides detailed instructions for proper application, safety precautions, and product specifications to ensure optimal results.
Image 1: A can of Varathane Premium Fast Dry Wood Stain in Ipswich Pine, highlighting its fast-drying and one-coat coverage features.
2. Safety Information
DANGER: Combustible liquid and vapor. Keep away from heat, sparks, open flames, and other ignition sources. Vapors may cause flash fire. Use only with adequate ventilation. Ensure proper respiratory protection if ventilation is insufficient.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- Wear appropriate personal protective equipment, including gloves and eye protection, during handling and application.
- Avoid prolonged breathing of vapors. Use in a well-ventilated area or outdoors.
- Keep out of reach of children and pets.
- Dispose of rags and waste materials properly according to local regulations, as they may spontaneously combust if not handled correctly. Immediately place used rags in a sealed, water-filled metal container.
- In case of skin contact, wash thoroughly with soap and water. For eye contact, flush with water for 15 minutes and seek medical attention.
3. Preparation
Proper surface preparation is crucial for achieving a uniform and durable finish. Follow these steps before applying the stain:
- Clean the Surface: Ensure the wood surface is clean, dry, and free of dirt, grease, glue, or old finishes.
- Sand the Wood: For bare wood, sand in the direction of the grain. Begin with #120 grit sandpaper, then progress to #150, and finally #180 grit. Do not use finer grits as this can close the wood pores, preventing proper stain absorption.
- Remove Dust: After sanding, thoroughly remove all sanding dust using a vacuum or a clean rag dampened with mineral spirits. Allow the surface to dry completely if mineral spirits were used.
- Stir the Stain: Stir the stain thoroughly before and during use to ensure pigments are evenly distributed. Do not shake the can, as this can create bubbles.
Image 2: An instructional graphic outlining the process of applying wood stain, including preparing the surface, applying the stain, allowing it to penetrate, and protecting the finished surface.
4. Application Instructions
Apply the stain following these steps for best results:
- Apply Stain: Apply one liberal coat of stain using a high-quality natural bristle brush or a clean, lint-free rag. Ensure even coverage across the entire surface.
- Allow Penetration: Allow the stain to penetrate the wood for 2-3 minutes. For a darker color, allow the stain to penetrate for a longer period, but do not let it dry completely before wiping.
- Wipe Excess: After the desired penetration time, wipe off any excess stain with a clean, lint-free rag, moving in the direction of the wood grain. Ensure all excess is removed to prevent a tacky finish.
5. Drying and Recoating
Varathane Premium Fast Dry Wood Stain is designed for quick drying:
- Dry to Touch: The stain typically dries to the touch in 1 hour. Drying times may vary based on humidity, temperature, and wood type.
- Recoating: If a darker color is desired, a second coat can be applied after 1 hour. Follow the same application steps as the first coat.
- Topcoat Application: To complete your wood project and provide protection, apply a Varathane polyurethane or other clear finish after the stain has dried for at least 1 hour. Darker stain colors may require a slightly longer drying time before applying a topcoat.
6. Cleanup
Clean tools and spills immediately after use:
- Tools: Clean brushes and other application tools with mineral spirits or paint thinner.
- Spills: Wipe up spills immediately with a rag dampened with mineral spirits.
- Disposal: Dispose of all waste materials, including rags and empty containers, in accordance with local environmental regulations. Rags soaked with oil-based products can spontaneously combust; immediately place them in a sealed, water-filled metal container.
7. Troubleshooting
- Uneven Color: Ensure the wood surface is evenly sanded and free of contaminants. Apply stain uniformly and wipe off excess consistently. Different wood types absorb stain differently, which can affect final color.
- Tacky Finish: A tacky finish usually indicates that too much stain was applied and not enough excess was wiped off. Ensure all excess stain is removed after the penetration time. High humidity can also prolong drying.
- Long Drying Time: High humidity, low temperatures, or insufficient ventilation can extend drying times. Ensure adequate airflow and appropriate environmental conditions.
- Color Not as Expected: Always test the stain on an inconspicuous area of the wood or a scrap piece of the same wood type before full application. The final color can vary based on wood species, porosity, and application technique.
8. Product Specifications
| Attribute | Detail |
|---|---|
| Brand | Varathane |
| Model Name | 262031 |
| Color | Ipswich Pine |
| Size | Half Pint (8.0 Fluid Ounces / 236 Milliliters) |
| Paint Type | Oil-based |
| Finish Type | Oil |
| Surface Recommendation | Wood |
| Recommended Uses | Interior wood projects (furniture, cabinets, doors, trim, paneling) |
| Special Feature | 1-coat coverage, fast-drying |
| Coverage | Up to 70 square feet per half pint |
| Item Weight | 8.8 ounces (250 Grams) |
| Product Dimensions | 3.15 x 5.51 x 8.27 inches |
| UPC | 020066211738 |
9. Additional Resources
9.1. Color Options
Varathane Premium Fast Dry Wood Stain is available in a wide range of colors to suit various aesthetic preferences. Refer to the color chart below for a visual representation of available options.
Image 3: A comprehensive chart showcasing the wide array of available Varathane wood stain colors, from light to dark tones.
9.2. Example Applications
The versatility of Varathane Premium Fast Dry Wood Stain allows for its use in various interior wood projects, enhancing the natural beauty of wood grain.
Image 4: An example of furniture, a nightstand and a chair, treated with wood stain, demonstrating a natural wood finish.
Image 5: A dresser featuring multiple drawers, each stained with a different color of wood stain, illustrating the range of available finishes.
Image 6: A wall decorated with horizontally arranged wood planks, each stained in a different color, creating a rustic and colorful effect.
Image 7: A square art piece composed of various sized wood planks, stained in different colors and arranged in a mosaic pattern.
9.3. User Guide (PDF)
For a downloadable version of the user guide, please refer to the official PDF document:
Download Varathane Premium Fast Dry Wood Stain User Guide (PDF)
10. Warranty Information
This product comes with a manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact Varathane customer support directly.
11. Customer Support
For further assistance, technical support, or inquiries regarding Varathane products, please visit the official Varathane website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
