1. Introduction
Thank you for choosing the Volteck APSE-IB Simple Switch. This manual provides essential information for the safe installation, operation, and maintenance of your new electrical switch. Please read it thoroughly before use and retain it for future reference.
The Volteck APSE-IB is a single-pole switch designed for indoor use, featuring an Italian line design and a white finish. It is constructed from durable ABS, polypropylene, and polycarbonate materials, ensuring reliable performance for controlling lighting or other electrical loads.
2. Safety Information
WARNING: Electrical work can be hazardous. Always follow these safety precautions:
- Always turn off power at the circuit breaker or fuse box before installing, servicing, or removing the switch. Failure to do so can result in serious injury or death.
- Ensure all wiring connections are secure and comply with local electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- Do not exceed the specified electrical ratings (125 V / 60 Hz, 10 A).
- This switch is designed for indoor use only. Do not install in wet or damp locations.
- Keep children away from electrical components during installation and operation.
3. Package Contents
The Volteck APSE-IB Simple Switch package typically includes:
- 1 x Volteck APSE-IB Simple Switch (White)
- Installation instructions (contained on packaging)
Image: Volteck APSE-IB Simple Switch in its individual bag packaging.
Image: Detailed view of the Volteck APSE-IB Simple Switch packaging, showing the UPC 7506240606741.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | APSE-IB |
| Brand | Volteck |
| Color | White |
| Material | ABS, Polypropylene, Polycarbonate |
| Voltage / Frequency | 125 V / 60 Hz |
| Current Rating | 10 Amperes |
| Switch Type | Single Switch (1-way) |
| Operation Mode | ON-OFF-ON |
| Mounting Type | Through-hole mounting |
| Dimensions (L x W x H) | 2.83 x 6.1 x 5.4 cm (28 x 61 x 54 mm) |
| Weight | 200 g |
| Indoor Use | Yes |
Image: Front view of the Volteck APSE-IB Simple Switch.
Image: Diagram showing the dimensions of the Volteck APSE-IB Simple Switch, with a length of 46 mm and a width of 22 mm.
Image: Close-up indicating the Volteck APSE-IB Simple Switch is manufactured from polypropylene and polycarbonate.
5. Setup & Installation
Before beginning installation, ensure you have read and understood the safety information in Section 2. It is recommended to consult a qualified electrician for installation if you are not familiar with electrical wiring.
5.1. Pre-Installation Steps
- Turn off Power: Locate the circuit breaker or fuse that controls the power to the switch location. Turn it OFF. Verify power is off using a voltage tester.
- Gather Tools: You will need basic electrical tools such as screwdrivers, wire strippers, and a voltage tester.
- Unpack the Switch: Carefully remove the Volteck APSE-IB switch from its packaging.
Image: Side view of the Volteck APSE-IB Simple Switch, showing its profile.
Image: Back view of the Volteck APSE-IB Simple Switch, highlighting the wiring terminals.
5.2. Wiring Diagram and Connection
The Volteck APSE-IB is a single-pole switch, typically used to control a light fixture from one location. Refer to the diagram below for standard wiring.
Image: Connection diagram for the Volteck APSE-IB Simple Switch, showing connections for Neutral and Line to a light bulb.
- Connect the incoming Line (hot) wire to one of the switch terminals.
- Connect the wire going to the light fixture (switched hot) to the other switch terminal.
- Ensure all connections are tight. Do not overtighten to avoid damaging the terminals.
- Carefully push the switch into the wall box, ensuring wires are not pinched.
- Secure the switch to the wall box with screws (not included, typically provided with the wall plate).
- Install the decorative wall plate (not included).
5.3. Installation Video Guide
For a visual guide on the installation process, please refer to the unboxing and installation video below. This video demonstrates the physical aspects of the switch and its basic handling.
Video: An unboxing video demonstrating the Volteck APSE-IB Simple Switch, showing its features and how to handle it before installation. This video is 35 seconds long.
6. Operation
Once installed and power is restored, the Volteck APSE-IB Simple Switch operates as a standard ON-OFF switch.
- To turn on the connected device (e.g., light), press the switch to the ON position.
- To turn off the connected device, press the switch to the OFF position.
The switch is designed for simple and reliable control of your electrical circuits.
7. Maintenance
The Volteck APSE-IB Simple Switch requires minimal maintenance.
- Cleaning: To clean the switch, ensure power is OFF at the circuit breaker. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Inspection: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off power and consult a qualified electrician.
8. Troubleshooting
If you experience issues with your Volteck APSE-IB Simple Switch, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not turn on/off the light. | No power to the switch. Loose wiring connection. Faulty light bulb/fixture. | Check the circuit breaker or fuse. Ensure it is ON. Turn off power, then check and tighten all wiring connections. Test the light bulb or fixture with another switch or power source. |
| Switch feels loose or wobbly. | Mounting screws are loose. | Turn off power, then carefully tighten the mounting screws that secure the switch to the wall box. |
| Switch is hot to the touch. | Overload or faulty wiring. | Immediately turn off power at the circuit breaker. This indicates a serious issue. Consult a qualified electrician. |
If these steps do not resolve the issue, or if you are uncomfortable performing any of these checks, contact a qualified electrician.
9. Warranty & Support
Volteck products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty information provided with your purchase or visit the official Volteck website.
For customer service inquiries, please contact your retailer or the manufacturer directly.
