Lexon LR135WV

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Lexon Dream Time Alarm Clock User Manual

Model: LR135WV

Introduction

Thank you for choosing the Lexon Dream Time Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your device. The Dream Time alarm clock features a unique design with intuitive controls for time and alarm settings, including adjustable alarm volume. It is constructed from durable ABS material and is powered by two batteries.

Product Overview

Front view of the Lexon Dream Time alarm clock displaying 10:10 PM and 26 degrees Celsius. — Front view of the Lexon Dream Time alarm clock, showing the digital display with current time (10:10 PM) and temperature (26°C). The clock has a dark brown body with a light green bezel around the display.

Angled view of the Lexon Dream Time alarm clock showing the time setting knob. — Angled view of the Lexon Dream Time alarm clock, highlighting the time adjustment knob on the right side. The display shows 10:52 AM, with an alarm set for 7:00 AM and a temperature of 18°C.

Front view of the Lexon Dream Time alarm clock displaying a smiley face. — Front view of the Lexon Dream Time alarm clock, showing a smiley face icon on the display, indicating the alarm is active or has just sounded. The alarm time 7:00 AM is visible at the bottom right.

Back view of the Lexon Dream Time alarm clock showing branding. — Back view of the Lexon Dream Time alarm clock, featuring the "LEXON DREAMTIME by Eugeni" branding on the rear panel. A control knob is visible on the right side.

Setup

1. Battery Installation

The Lexon Dream Time alarm clock requires two batteries for operation.

Locate the battery compartment on the back of the alarm clock. The magnetic back-lid can be easily removed.
Insert two new batteries, ensuring correct polarity (+ and -).
Replace the battery compartment lid securely.

2. Initial Time Setting

Upon battery installation, the display will activate.

Use the TIME knob located on the right side of the clock to adjust the current time. Rotate the knob clockwise to advance the time and counter-clockwise to go back.
The clock supports a 24-hour display format.

Operating Instructions

Setting the Time

Use the TIME knob located on the right side of the clock. Rotate the knob clockwise to advance the time and counter-clockwise to go back. The clock displays time in a 24-hour format.

Setting the Alarm

Use the ALARM knob located on the left side of the clock to set your desired alarm time. The set alarm time will be visible on the display, typically in the lower right corner.

Alarm Activation and Snooze

When the alarm sounds, gently touch the top surface of the alarm clock.

A brief touch will activate the snooze function, temporarily silencing the alarm for a few minutes before it sounds again.
To completely stop the alarm for the day, touch the top surface again.

Adjusting Alarm Volume

The alarm volume can be adjusted in 5 steps. Locate the volume control, which is typically integrated with one of the side knobs. Rotate the knob to increase or decrease the alarm sound level.

Backlight Activation

To illuminate the display in low light conditions:

Gently touch or wave your hand over the top surface of the alarm clock. The backlight will activate for a short period.

Maintenance

Cleaning

To clean the alarm clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the surface or internal components.

Battery Replacement

When the display dims or the alarm function becomes unreliable, it is time to replace the batteries. Follow the "Battery Installation" steps in the Setup section. Dispose of used batteries responsibly according to local regulations.

Troubleshooting

Problem	Possible Cause	Solution
Display is blank or dim.	Low or depleted batteries.	Replace batteries with new ones. Ensure correct polarity.
Alarm does not sound.	Alarm not set or volume too low.	Ensure the alarm time is set. Adjust alarm volume using the dedicated control.
Time/Alarm setting knobs are unresponsive.	Internal mechanism issue.	Ensure the knobs are clean and free from obstruction. If the issue persists, contact customer support.
Backlight not working.	Low batteries. Sensor obstruction.	Replace batteries. Ensure the top surface is clean and clear.

Specifications

Brand: Lexon
Model Number: LR135WV
Color: White / Green
Product Dimensions: 13 x 5.5 x 5.67 cm (5.12 x 2.17 x 2.23 inches)
Material: Plastic (ABS)
Special Features: Alarm, Adjustable Volume, Backlight, Snooze
Product Weight: 181 g (0.4 lbs)
Power Source: 2 x Batteries

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Lexon website. Keep your proof of purchase for any warranty claims.

Contact Information: Please visit www.lexon-design.com for the latest support resources and contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.