Tektronix AFG1022 Arbitrary Function Generator User Manual

1. Introduction

The Tektronix AFG1022 Arbitrary Function Generator is a versatile instrument designed for generating various waveforms required in laboratory and testing environments. With a bandwidth of 25 MHz or 60 MHz and dual output channels, it provides an output amplitude ranging from 1 mVpp to 10 Vpp across its full bandwidth. This device offers a comprehensive set of features for waveform generation, making it a valuable tool for a wide range of applications.

Key features include:

• Dual-channel operation with 25 MHz bandwidth.
• Output amplitude from 1 mVpp to 10 Vpp.
• 14-bit vertical resolution and 1 µHz frequency resolution.
• 50 built-in arbitrary waveforms.
• Support for continuous, modulation, sweep, and burst modes.
• Dedicated 3.95-inch TFT LCD display for clear visualization.
• User-friendly front panel and menu navigation.

2. Safety Information

Before operating the Tektronix AFG1022, please read and understand all safety instructions to prevent injury and avoid damage to the instrument or other connected equipment. This device is designed for use by qualified personnel only.

General Safety Precautions:

• Grounding: Always ensure the instrument is properly grounded. The power cord provided has a three-prong plug for this purpose. Do not defeat the grounding-type plug.
• Power Source: Connect the instrument to a power source that is within the specified voltage range (100-240V AC, 50/60 Hz). Verify the line selector switch on the rear panel is set correctly for your local voltage.
• Ventilation: Ensure proper ventilation around the instrument. Do not block ventilation openings. Overheating can cause damage.
• Environment: Operate the instrument in a clean, dry environment. Avoid exposure to moisture, extreme temperatures, or corrosive gases.
• Servicing: Refer all servicing to qualified service personnel. Do not attempt to service the instrument yourself unless you are qualified to do so.
• Cables and Connectors: Use only specified cables and connectors. Ensure all connections are secure before applying power.
• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.

3. What's in the Box

Upon unpacking your Tektronix AFG1022 Arbitrary Function Generator, please verify that all the following items are included:

• Tektronix AFG1022 Arbitrary Function Generator Unit
• Statement of Compliance
• CD (containing software and documentation)
• User Manual (this document)
• Fuse (2 pieces, spare)
• Cables (3 pieces, including USB and BNC cables)
• Calibration Certificate
• Power Cord

If any items are missing or damaged, please contact your Tektronix supplier or customer support immediately.

4. Setup

Follow these steps to set up your AFG1022 Arbitrary Function Generator for initial use.

4.1 Unpacking and Inspection

1. Carefully remove the instrument and all accessories from the packaging.
2. Inspect the instrument for any signs of physical damage that may have occurred during transit. If damage is found, contact your supplier.
3. Retain the original packaging materials for future transport or storage.

4.2 Power Connection

1. Locate the power inlet on the rear panel of the AFG1022.
2. Verify the Line Selector switch on the rear panel is set to the correct voltage for your region (110V AC or 220V AC). Adjust if necessary.
3. Connect the provided power cord to the instrument's power inlet and then to a grounded AC power outlet.

4.3 Connecting Outputs

1. Identify the two output channels (Out1 and Out2) on the front panel. These are BNC connectors.
2. Connect appropriate BNC cables from the desired output channel(s) to your test circuit or device under test.
3. Ensure the impedance setting on the AFG1022 matches the impedance of your load (typically 50Ω or high impedance).

5. Operating Instructions

This section provides an overview of the basic operation of the Tektronix AFG1022. For detailed instructions on specific functions, refer to the comprehensive user manual provided on the included CD.

5.1 Powering On and Initial Screen

1. Press the power button located on the front panel to turn on the instrument.
2. The display will show the Tektronix logo and then transition to the main waveform generation interface.

5.2 Basic Waveform Generation

The AFG1022 can generate various standard waveforms and arbitrary waveforms.

• Selecting Waveform Type: Use the dedicated buttons below the display (Sine, Square, Ramp, Pulse, Arb, Noise) to select the desired waveform.
• Setting Frequency: Use the numeric keypad and the rotary knob to input the desired frequency. The display will update in real-time.
• Setting Amplitude and Offset: Adjust the amplitude (Vpp) and DC offset (V) using the corresponding soft keys and the rotary knob.
• Enabling Output: Press the On/Off button for Channel 1 (Out1) or Channel 2 (Out2) to enable the waveform output. The button will illuminate when the output is active.

5.3 Advanced Functions

• Modulation: Press the Mod button to access modulation settings (AM, FM, PM, FSK, PWM).
• Sweep: Configure frequency sweeps by pressing the Sweep soft key.
• Burst: Generate burst waveforms by pressing the Burst soft key.
• Arbitrary Waveforms: The AFG1022 supports user-defined arbitrary waveforms. Refer to the full manual for instructions on creating and loading custom waveforms.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Tektronix AFG1022.

6.1 Cleaning

• Always disconnect the power cord before cleaning the instrument.
• Use a soft, dry cloth to wipe the exterior surfaces. For stubborn dirt, a cloth lightly dampened with mild detergent and water may be used.
• Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the plastic parts and labels.
• Avoid spraying liquids directly onto the instrument.

6.2 Fuse Replacement

If the instrument does not power on, check the fuse located in the power inlet on the rear panel. Ensure the replacement fuse matches the specified type and rating (e.g., 250V, 2A). Refer to the full manual for detailed instructions on fuse replacement.

6.3 Calibration

For continued accuracy, periodic calibration by qualified service personnel is recommended. Refer to the calibration certificate for the recommended calibration interval.

7. Troubleshooting

This section provides solutions to common issues you might encounter with your AFG1022. If the problem persists, contact Tektronix customer support.

8. Specifications

The following table lists the key specifications for the Tektronix AFG1022 Arbitrary Function Generator. All specifications are typical unless otherwise noted.

9. Warranty & Support

Tektronix products are designed for reliability and performance. For specific warranty terms and conditions applicable to your AFG1022, please refer to the warranty information provided with your purchase or visit the official Tektronix website.

Customer Support:

If you require technical assistance, have questions about your instrument, or need to arrange for service, please contact Tektronix customer support. Support contact information can typically be found on the Tektronix website or in the documentation included with your product.

When contacting support, please have your instrument's model number (AFG1022) and serial number ready. The serial number is located on the rear panel of the instrument.

For the latest information, drivers, software, and additional resources, please visit the official Tektronix website: www.tek.com