Mastercraft SRT Touring (195/65R15 91H)
Mastercraft SRT Touring Radial Tire User Manual
Model: SRT Touring (195/65R15 91H)
Brand: Mastercraft
Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Mastercraft SRT Touring Radial Tire. Designed for passenger cars, the SRT Touring tire offers reliable performance and comfort for year-round driving conditions. Adhering to the guidelines in this manual will help ensure the longevity and optimal performance of your tires.
Setup: Tire Installation
Proper installation is crucial for tire safety and performance. It is highly recommended that tire installation be performed by a certified professional using appropriate equipment.
Pre-Installation Checks:
- Inspect Tires: Before mounting, visually inspect each tire for any manufacturing defects, damage, or signs of improper storage.
- Rim Compatibility: Ensure the tire size (195/65R15) and type are compatible with your vehicle's rims. The recommended rim width for this tire is 6 inches.
- Valve Stems: Always install new valve stems when replacing tires to ensure a proper seal and prevent air leaks.
Mounting Procedure:
- Lubricate the tire beads and rim flanges with a suitable tire mounting lubricant.
- Mount the tire onto the rim using a tire mounting machine, ensuring the tire's rotation direction (if indicated) matches the vehicle's forward motion.
- Inflate the tire slowly to the recommended pressure, ensuring the beads seat properly on the rim. Do not exceed 40 PSI during bead seating.
- Once seated, adjust the tire pressure to the vehicle manufacturer's recommended PSI, typically found on a placard inside the driver's side door jamb or in the owner's manual. The maximum pressure for this tire is 44 PSI.
- Balance the tire and wheel assembly using a wheel balancing machine to prevent vibrations and ensure even wear.
- Install the balanced wheel assembly onto the vehicle, tightening lug nuts to the vehicle manufacturer's specified torque settings.
Image: Mastercraft SRT Touring tire, ready for installation.
Operating Guidelines
To maximize the performance and lifespan of your Mastercraft SRT Touring tires, observe the following operating guidelines:
- Maintain Proper Inflation: Check tire pressure monthly, or before long trips, using a reliable pressure gauge. Refer to your vehicle's owner's manual or door jamb placard for the correct cold inflation pressure. Under-inflation or over-inflation can lead to premature wear, reduced fuel efficiency, and compromised handling.
- Load Capacity: Do not exceed the maximum load capacity of 1356 pounds per tire. Overloading can cause excessive heat buildup and tire failure.
- Driving Habits: Avoid sudden acceleration, hard braking, and aggressive cornering, as these actions can accelerate tread wear.
- Road Hazards: Drive cautiously over potholes, curbs, and other road hazards to prevent tire damage.
Image: Detailed view of the SRT Touring tire tread.
Maintenance
Regular maintenance is key to extending the life of your Mastercraft SRT Touring tires and ensuring safe driving.
- Tire Rotation: Rotate your tires every 5,000 to 7,500 miles, or as recommended by your vehicle manufacturer. This promotes even tread wear across all four tires.
- Wheel Alignment: Have your vehicle's wheel alignment checked periodically, especially if you notice uneven tire wear or steering issues. Proper alignment prevents irregular wear patterns.
- Tread Depth Inspection: Regularly inspect tread depth. The minimum legal tread depth is 2/32nds of an inch. The SRT Touring tire has an initial tread depth of 10/32nds. Replace tires when they reach the wear indicators.
- Visual Inspection: Periodically check tires for cuts, punctures, bulges, or other damage. If damage is found, have the tire inspected by a professional immediately.
- Cleaning: Clean tires with mild soap and water. Avoid harsh chemicals that can degrade rubber.
Image: Overhead view of the SRT Touring tire tread pattern.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Uneven Tread Wear | Improper inflation, misaligned wheels, unbalanced tires, worn suspension components. | Check and adjust tire pressure. Have wheel alignment and tire balancing checked by a professional. Inspect suspension. |
| Vibrations while Driving | Unbalanced tires, bent rim, worn suspension, tire damage. | Have tires balanced. Inspect rims and tires for damage. Consult a mechanic for suspension issues. |
| Frequent Air Loss | Puncture, faulty valve stem, bead leak, porous rim. | Inspect tire for punctures. Check valve stem. Have tire and rim inspected by a professional for leaks. |
| Hydroplaning | Insufficient tread depth, excessive speed in wet conditions, improper inflation. | Check tread depth and replace if worn. Reduce speed in wet conditions. Maintain proper tire pressure. |
Specifications
| Attribute | Value |
|---|---|
| Brand | Mastercraft |
| Model | SRT Touring |
| Size | 195/65R15 |
| Load Capacity | 1356 Pounds |
| Speed Rating | 91H (H-rated for speeds up to 130 mph) |
| Tread Depth | 10/32nds |
| Maximum Pressure | 44 PSI |
| Construction Type | Radial |
| Seasons | Year Round |
| Item Weight | 19 Pounds |
| UPC | 029142810100 |
| OEM Part Number | 90000021137 |
Warranty and Support
Mastercraft Tires are backed by a comprehensive warranty. For specific details regarding the warranty coverage for your SRT Touring tires, please refer to the official Mastercraft Tires website or contact their customer support.
Customer Support: For technical assistance, warranty claims, or general inquiries, please visit the Mastercraft Tires Contact Page or consult your authorized Mastercraft dealer.
When contacting support, please have your tire's DOT serial number and purchase information readily available.
Related documentsSRT Touring (195/65R15 91H)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.