SWISSINNO Mole Trap SuperCat Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your SWISSINNO Mole Trap SuperCat. Please read all instructions carefully before use to ensure optimal performance and safety.

The SWISSINNO Mole Trap SuperCat is designed for efficient mole control in lawns and gardens. Its mechanical activation and bi-directional triggering mechanism ensure effective results without the need for bait. The trap is reusable and features an above-ground indicator for easy monitoring.

Image: The SWISSINNO Mole Trap SuperCat installed in a garden, ready for use.

Safety Information

WARNING: This is not a toy! Handle this product according to the instructions to avoid injury. Place this product where children and pets cannot access it.

• Always wear protective gloves when handling the trap.
• Keep hands and fingers clear of the trap's mechanism when setting or checking.
• Ensure the trap is placed securely in the mole tunnel to prevent accidental triggering.
• Store the trap in a safe place away from children and pets when not in use.

Product Features

The SuperCat Mole Trap offers several key features for effective and user-friendly mole control:

• Fast, Decisive Action: The trap integrates into the tunnel and closes with strong force when the mole nudges the set mechanism, delivering rapid results without baiting.
• Bi-Directional Triggering: Accessible from both directions of travel, reducing missed opportunities in active tunnels.
• Clear Above-Ground Signal: The "wings" drop down after a trigger, providing a visual indication of a catch without needing to dig up the trap.
• Easy-Set Process: Simple installation method without extensive digging.
• Reusable Tool: Built for immediate resetting after a catch, offering season-long control.

Image: Visual representation of the trap's design, highlighting mechanical activation, two-way action, no bait requirement, and reusability.

Setup and Installation

Follow these steps for proper installation of the SWISSINNO Mole Trap SuperCat:

1. Locate an Active Tunnel: Use a probe or stick to find an active mole tunnel. Starting close to a fresh mound of soil, push the probe into the ground repeatedly in different spots until it easily sinks into the ground, indicating a tunnel.
2. Prepare the Hole: Dig a hole approximately 10 cm (4 inches) in diameter down to the tunnel. Check the direction of the tunnel with your finger.
3. Block the Tunnel: Pour loose, dry soil into the hole to fill and block the tunnel. Do not press the soil down.
4. Insert the Trap: Place the trap into the loose soil, ensuring its legs are aligned with the direction of the tunnel.
5. Test the Mechanism: Gently lift and lower the trap's "wings" two to three times to ensure the legs move freely without obstruction.
6. Seal the Area: Cover the sides of the trap with loose soil to block out light and airflow. This encourages the mole to use the tunnel where the trap is placed.
7. Set the Trap: Lift the trap's "wings" to set it. The red indicator will be visible when the trap is set.

Image: Step-by-step diagram showing how to locate a tunnel, dig a hole, place the trap, and set it.

Operating Instructions

Once the trap is set, regular monitoring is essential:

• Check the Trap: Inspect the trap every 2-3 days. The above-ground indicator (the "wings") will drop down if the trap has been triggered, indicating a successful catch.
• Removal: If a mole is caught, carefully remove the trap from the tunnel.
• Disposal: Dispose of the mole humanely and according to local regulations.
• Resetting: The trap can be immediately reset for continued use.

Image: A person demonstrating the process of setting the mole trap in a lawn.

Maintenance

To ensure the longevity and reliable operation of your SuperCat Mole Trap:

• Cleaning: Rinse the trap with water only after each catch.
• Avoid Oiling: Do not oil the mechanism, as this can impair its function.
• Storage: Store the trap in a dry place when not in use.

Troubleshooting

If the trap is not catching moles:

• Verify Active Tunnel: Ensure the trap is placed in an active mole tunnel. Moles often create new tunnels, so re-probe the area if activity seems to have shifted.
• Proper Placement: Double-check that the trap's legs are correctly aligned with the tunnel's direction and that the area around the trap is sealed to prevent light and air entry.
• Soil Condition: Ensure the soil around the trap is loose enough for the mole to trigger the mechanism easily.
• Patience: Moles can be cautious. It may take a few days for a mole to encounter and trigger the trap.

Specifications

Warranty and Support

For warranty information or product support, please refer to the manufacturer's official website or contact SWISSINNO customer service directly. Contact details are typically found on the product packaging or the brand's official online presence.