1. Introduction
This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your Braeburn 7320 Universal Smart Wi-Fi Programmable Touchscreen Thermostat. This device is designed to manage your home's heating and cooling systems efficiently.
Key Features:
- Large 6.5 sq. in. easy-read touchscreen display with bright blue backlight.
- Programmable options: 7-day, 5-2 day, or non-programmable.
- Compatibility with conventional and heat pump systems (up to 3H/2C).
- Optional Wi-Fi control via smartphone, tablet, or PC using the free BlueLink Smart Connect application.
- Supports auto or manual changeover, residential or commercial modes.
- Adjustable temperature limits.
- Wireless or wired remote sensing capabilities.
- Auxiliary heat fossil fuel option.
- Humidification and dehumidification control (requires 7330 wireless sensor).
- Auxiliary "A" terminal for economizer, fresh air, or output control.
- Text and email service and temperature alerts.
Image 1: Braeburn 7320 Universal Smart Wi-Fi Programmable Touchscreen Thermostat. This image shows the white rectangular thermostat with its large grey touchscreen display and two grey arrow buttons on the right side. The 'Braeburn' logo is visible above the screen.
2. Safety Information
Please read all instructions carefully before installing or operating this thermostat. Failure to follow these instructions could result in property damage, injury, or death.
- Electrical Safety: Always turn off power to the heating and cooling system at the main fuse or circuit breaker panel before installing or servicing the thermostat.
- Professional Installation: If you are unsure about any part of the installation process, it is recommended to seek assistance from a qualified HVAC technician.
- Battery Handling: Dispose of batteries according to local regulations. Do not mix old and new batteries, or different types of batteries.
3. Installation
The Braeburn 7320 thermostat can be powered by hardwire (24V AC) or batteries. It is compatible with most 24-volt conventional and heat pump systems. Ensure the power to your HVAC system is OFF before beginning installation.
Mounting:
- Select a location on an interior wall, approximately 5 feet (1.5 meters) above the floor, away from direct sunlight, drafts, and heat sources.
- Carefully remove the old thermostat, noting the wiring connections.
- Mount the new thermostat's base plate to the wall using the provided screws.
Wiring:
Connect the wires from your HVAC system to the corresponding terminals on the Braeburn 7320. Refer to the wiring diagram provided with your thermostat packaging for specific configurations. The thermostat supports up to 3 heating stages and 2 cooling stages. An auxiliary "A" terminal is available for specific control functions.
Initial Setup:
After wiring and mounting, restore power to your HVAC system. The thermostat will power on, and you may need to configure initial settings such as system type (conventional or heat pump) and number of stages.
4. Setup
Wi-Fi Connection:
To enable smart features and remote control, connect your thermostat to your home's Wi-Fi network:
- Download the free BlueLink Smart Connect application on your smartphone or tablet. The application is also accessible via PC.
- Follow the on-screen instructions within the app to create an account and add your Braeburn 7320 thermostat. This typically involves putting the thermostat into a Wi-Fi pairing mode and entering your network credentials.
- Once connected, you can control your thermostat remotely and receive text and email alerts.
Programming Schedules:
The Braeburn 7320 offers flexible programming options:
- 7-Day Programming: Allows for a unique schedule for each day of the week.
- 5-2 Day Programming: Allows one schedule for weekdays (Monday-Friday) and another for weekends (Saturday-Sunday).
- Non-Programmable: Operates as a manual thermostat, maintaining a set temperature until changed.
Access the programming menu on the touchscreen or through the BlueLink app to set your desired temperature schedules for different times of the day.
5. Operating
Basic Operation:
The large touchscreen display allows for easy interaction. Use the up and down arrow buttons (located on the right side of the thermostat) to adjust the set temperature.
System Modes:
Your thermostat typically offers the following system modes:
- Heat: The system will only activate the heating function to reach the set temperature.
- Cool: The system will only activate the cooling function to reach the set temperature.
- Auto: The thermostat automatically switches between heating and cooling to maintain the set temperature range.
- Off: The heating and cooling system is turned off.
Select the desired mode using the touchscreen interface.
Fan Operation:
You can typically set the fan to:
- Auto: The fan runs only when the heating or cooling system is active.
- On: The fan runs continuously, regardless of heating or cooling activity.
Advanced Controls:
- Adjustable Temperature Limits: Configure minimum and maximum temperature settings to prevent extreme adjustments.
- Humidification/Dehumidification: If equipped with the optional 7330 wireless sensor, the thermostat can control humidification and dehumidification.
6. Maintenance
Battery Replacement:
The Braeburn 7320 thermostat requires 1 AA alkaline battery for operation if not hardwired. Replace batteries when the low battery indicator appears on the display. To replace:
- Gently pull the thermostat body away from its wall plate.
- Remove the old AA battery.
- Insert a new AA alkaline battery, ensuring correct polarity.
- Snap the thermostat body back onto the wall plate.
Cleaning:
To clean the thermostat's touchscreen and casing:
- Use a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing.
7. Troubleshooting
If you encounter issues with your Braeburn 7320 thermostat, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Thermostat has no power / blank display | Dead batteries; Power outage; Blown fuse/tripped breaker; Wiring issue. | Replace batteries. Check main power supply to HVAC system. Verify wiring connections. |
| Heating/Cooling system not responding | Incorrect system mode; Wiring issue; HVAC system malfunction. | Ensure thermostat is in the correct mode (Heat/Cool/Auto). Check wiring. Consult an HVAC technician if the system itself is not functioning. |
| Difficulty connecting to Wi-Fi | Incorrect Wi-Fi password; Router issues; Thermostat not in pairing mode; Network compatibility. | Double-check Wi-Fi password. Restart your router. Ensure the thermostat is in Wi-Fi setup mode as per app instructions. Verify your network is 2.4GHz compatible. |
| Backlight is dim or not staying on | Settings configuration; Low battery. | Check thermostat settings for backlight duration/brightness. Replace batteries if applicable. |
| Inaccurate temperature readings | Thermostat location; Sensor obstruction. | Ensure the thermostat is not in direct sunlight or near drafts/heat sources. Clean any dust from sensor vents. |
If problems persist after attempting these solutions, please contact Braeburn customer support or a qualified HVAC professional.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Braeburn |
| Model Name | Braeburn 7320 |
| Controller Type | Amazon Alexa, Vera (via Wi-Fi) |
| Special Feature | Programmable |
| Color | Blue (referring to backlight, product is white) |
| Specific Uses For Product | Heat Pump, Conventional HVAC |
| Temperature Control Type | Programmable |
| Connectivity Technology | Ethernet (for internal module), Wi-Fi (for user control) |
| Included Components | Universal Smart Wi-Fi Programmable Touchscreen Thermostat 3H / 2C |
| Power Source | Battery Powered (1 AA required) or Hardwire (24V AC) |
| Item Weight | 5.4 ounces (153 grams) |
| Voltage | 24 Volts |
| Material | Plastic |
| Shape | Rectangular |
| Display Type | Digital Touchscreen |
| Screen Size | 6.5 Inches (diagonal) |
| Control Type | Touch |
| Control Method | App, Touchscreen |
| Connectivity Protocol | Wi-Fi |
| Mounting Type | Wall Mount |
| Style | Touchscreen, Smart, Wireless, Manual |
| Backlight | Yes |
| Number of Batteries | 1 AA batteries required |
| UPC | 833732001928 |
| Product Dimensions | 5.56 x 1.19 x 3.94 inches |
9. Warranty and Support
For specific warranty information regarding your Braeburn 7320 thermostat, please refer to the documentation included with your product or visit the official Braeburn website. For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Braeburn customer support directly.
Braeburn Contact Information: Please refer to the manufacturer's website or product packaging for the most current contact details.
