1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 E21176-PC Aura Modern LED Pendant Light. Please read this manual thoroughly before beginning installation and retain it for future reference.
The ET2 E21176-PC Aura Pendant Light features a sleek design with a polished chrome channel gracefully formed into offsetting waves. This fixture provides efficient LED lighting, is fully dimmable, and is suitable for various indoor settings.
Figure 1: ET2 E21176-PC Aura Modern LED Pendant Light. This image displays the pendant light with its chrome finish and integrated LED elements, showcasing its unique wave-like design.
2. Important Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure the fixture is properly grounded.
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Handle the fixture with care to avoid damage to the LED components or glass shade.
- Do not exceed the specified voltage (120 Volts).
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer support for assistance.
- Aura-Single Pendant Light Fixture (Model: E21176-PC)
- Mounting Hardware (Canopy, screws, wire nuts)
- Instruction Manual
4. Setup and Installation
This fixture is designed for semi-flush mount installation and is adaptable for slope ceilings. No assembly is required for the main fixture body.
4.1 Tools Required (Not Included)
- Phillips head screwdriver
- Wire strippers
- Electrical tape
- Safety glasses
4.2 Installation Steps
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed.
- Prepare Mounting: Secure the mounting bracket (canopy) to the junction box using the provided screws. The canopy has dimensions of 8 x 8 x 2.75 inches.
- Wire Connections: Connect the fixture's wires to the corresponding household wires:
- Connect the black (live) wire from the fixture to the black (live) wire from the junction box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box.
- Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the junction box.
- Mount Fixture: Carefully push the wired connections into the junction box. Align the fixture with the mounting bracket and secure it in place using the provided screws.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker or fuse box.
Figure 2: ET2 E21176-PC Aura Pendant Light installed in a modern bathroom setting. This image illustrates the fixture's aesthetic integration into a living space, demonstrating its size and light output.
5. Operating Instructions
The ET2 E21176-PC Aura Pendant Light is an LED fixture designed for ease of use.
- Power On/Off: Operate the light using a standard wall switch (rocker type recommended).
- Dimming Functionality: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch. Consult a qualified electrician for dimmer compatibility.
- Control Method: The fixture supports app control, allowing for advanced lighting adjustments if integrated with a compatible smart home system. Refer to your smart home system's instructions for pairing and control.
- Light Color: The fixture emits a warm white light (3000 Kelvin).
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your pendant light.
- Cleaning: To clean the fixture, ensure the power is turned off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the chrome finish or acrylic components.
- LED Care: The integrated LED light source is designed for long-lasting efficiency (rated life of 35,000 hours) and is not user-replaceable. Do not attempt to disassemble the LED components.
- Inspection: Periodically inspect the wiring and mounting for any signs of wear or loosening. If any issues are found, disconnect power and consult a qualified electrician.
7. Troubleshooting
If you encounter issues with your pendant light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is in the ON position. |
| Light flickers or dims unexpectedly. | Incompatible dimmer switch or loose wiring. | Ensure dimmer is LED compatible. Check wire connections for tightness (with power off). |
| Light output is low. | Dimmer setting is too low. | Adjust dimmer to a higher setting. |
| Fixture appears damaged. | Physical damage during shipping or installation. | Do not install or operate. Contact customer support for replacement. |
If troubleshooting steps do not resolve the issue, contact a qualified electrician or customer support.
8. Specifications
- Model: E21176-PC
- Brand: ET2
- Dimensions: 26.4"L x 26.4"W x 30.1"H (Assembled Diameter: 24 Inches)
- Weight: 11 Pounds
- Power Source: Corded Electric
- Voltage: 120 Volts
- Wattage: 104 Watts
- Light Source Type: Integrated LED
- Number of Light Sources: 16
- Brightness: 7257 Lumens
- Color Temperature: 3000 Kelvin (Warm White)
- CRI: 80+
- Rated Life: 35,000 hours
- Finish: Chrome
- Shade Material: Glass
- Installation Type: Semi Flush Mount
- Special Features: Dimmable, Adjustable, App Control
- Indoor/Outdoor Usage: Indoor
- Certification: UL Listed
- UPC: 845094077091
9. Warranty and Support
9.1 Warranty Information
All products purchased are covered under a 1-year manufacturer's warranty, beginning on the day the product is originally shipped. This warranty covers items and conditions identified in the original manufacturer's warranty. A 30-day replacement parts policy is also in place to ensure a fully working item upon receipt.
The warranty specifically excludes loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
9.2 Customer Support
For technical assistance, missing parts, or warranty claims, please contact ET2 customer support. Refer to your purchase documentation for specific contact details or visit the official ET2 website.
