Vonets VAP11N-300 Wireless Mini WiFi Bridge/Repeater User Manual

1. Introduction

The Vonets VAP11N-300 is a versatile 2.4GHz WiFi bridge and repeater designed to provide wireless connectivity to wired devices or extend the range of an existing WiFi network. Its compact and portable design makes it suitable for various applications, including connecting IP devices, printers, gaming consoles, and more to a wireless network.

The Vonets VAP11N-300 device, a compact solution for wireless networking.

2. What's in the Box

Please check the package contents to ensure all items are present:

• Vonets VAP11N-300 Device
• USB Power Cable
• Ethernet Cable
• User Manual

The VAP11N-300 device shown alongside its included user manual.

3. Setup and Configuration

This section guides you through the initial setup of your VAP11N-300 device.

3.1. Initial Connection

Before configuration, connect the VAP11N-300 to a power source and your computer.

1. Connect the USB power cable to the VAP11N-300 and then to a 5V/1A power supply (e.g., a computer USB port or a USB power adapter).
2. Connect the Ethernet cable from the VAP11N-300 to your computer's Ethernet port.

The VAP11N-300 connected to a laptop, illustrating the USB power and Ethernet data connections.

A detailed view of the VAP11N-300's ports, including USB for power, Ethernet for data, and the reset button.

The VAP11N-300 showing its DC power input and the connected USB power cable.

3.2. Configuration Video Guide

For a visual step-by-step guide on configuring your VAP11N-300, please watch the official configuration video below. This video demonstrates both computer-based and smartphone-based setup methods.

Official configuration video for the Vonets VAP11N-300 Wireless Bridge/WiFi Repeater.

3.3. Configuration via Computer (Manual Steps)

1. Ensure your computer's Wi-Fi is turned off and it is connected to the VAP11N-300 via Ethernet.
2. Open a web browser (e.g., Internet Explorer, Chrome) and enter the default IP address 192.168.254.254 or the configured domain http://vonets.cfg in the address bar.
3. Log in using the default User ID: admin and Password: admin.
4. Navigate to the 'Scan Hotspots' section. The device will search for available WiFi networks.
5. Select your desired WiFi network (SSID) from the list and click 'Next'.
6. Enter the password for your selected WiFi network.
7. Click 'Apply' to save the settings. The device will then reboot. This process may take approximately 1 minute. Wait until the LED light flashes normally, indicating a successful connection.

3.4. Configuration via Smartphone (Manual Steps)

1. On your smartphone, go to Wi-Fi settings and connect to the VAP11N-300's default SSID. The SSID will typically be in the format "VONETS_2.4G_XXXX" where XXXX are the last four digits of the device's MAC address. The default password is 12345678.
2. Open a web browser on your smartphone and enter the default IP address 192.168.254.254 or the configured domain http://vonets.cfg in the address bar.
3. Log in using the default User ID: admin and Password: admin.
4. Navigate to the 'Scan Hotspots' section. The device will search for available WiFi networks.
5. Select your desired WiFi network (SSID) from the list and click 'Next'.
6. Enter the password for your selected WiFi network.
7. Click 'Apply' to save the settings. The device will then reboot. This process may take approximately 1 minute. Wait until the LED light flashes normally, indicating a successful connection.

4. Operating Modes

The VAP11N-300 supports two primary operating modes:

4.1. Bridge Mode (AP Mode)

In Bridge mode, the VAP11N-300 converts a wired network connection into a wireless one. This is ideal for devices that only have an Ethernet port but need to connect to a Wi-Fi network, such as IP cameras, network printers, smart TVs, or gaming consoles (e.g., Xbox, PS3).

Illustration of the VAP11N-300 in AP Mode, enabling wired devices to access a wireless network.

4.2. Repeater Mode

In Repeater mode, the VAP11N-300 extends the coverage of an existing Wi-Fi network. It receives the wireless signal from your main router and re-transmits it, effectively expanding the Wi-Fi signal to areas with weak or no coverage. This mode is useful for improving Wi-Fi signal strength in larger homes or offices.

Diagram illustrating the VAP11N-300 in Repeater Mode, extending the range of a wireless network.

5. Maintenance

To ensure optimal performance and longevity of your Vonets VAP11N-300, follow these maintenance guidelines:

• Keep Clean: Regularly wipe the device with a soft, dry cloth to remove dust. Avoid using liquid cleaners.
• Proper Ventilation: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not cover the device or block its ventilation holes.
• Avoid Extreme Conditions: Do not expose the device to extreme temperatures, humidity, or direct sunlight.
• Handle with Care: Avoid dropping or subjecting the device to strong impacts.
• Firmware Updates: Periodically check the official Vonets website for any available firmware updates to improve performance and security.

6. Troubleshooting

If you encounter issues with your VAP11N-300, try the following solutions:

7. Specifications

Detailed product specifications for the VAP11N-300.

8. Warranty and Support

For specific warranty information regarding your Vonets VAP11N-300, please refer to the documentation included with your purchase or contact the seller directly. For technical support or further assistance, you may contact Vonets support via email:

support@vonets.com