SVBONY 34299103A-W2054A

Download PDF
Contents

SVBONY T2 T-Ring and 1.25-inch T-Adapter Instruction Manual

Model: 34299103A-W2054A

1. Introduction

This manual provides instructions for the proper assembly and use of the SVBONY T2 T-Ring and 1.25-inch T-Adapter. This accessory combination is designed to connect Canon EOS DSLR cameras to telescopes for prime-focus astrophotography.

The T-Ring attaches to your Canon EOS camera body, and the 1.25-inch T-Adapter then threads into the T-Ring, allowing the entire assembly to be inserted into a telescope's 1.25-inch focuser.

2. Safety Information

Warning:

  • Never look directly at the sun through a telescope or camera without proper solar filters. Doing so can cause severe and permanent eye damage.
  • Ensure all connections are secure to prevent accidental drops of your camera or telescope components.

3. Product Components

The SVBONY T2 T-Ring and 1.25-inch T-Adapter set includes the following parts:

  • SVBONY T2 T-Ring for Canon EOS: This component attaches directly to your Canon EOS DSLR camera body.
  • SVBONY 1.25-inch T-Adapter: This component threads into the T-Ring and has a 1.25-inch barrel for insertion into a telescope focuser.
SVBONY T2 T-Ring and 1.25-inch T-Adapter components

Image 3.1: The SVBONY T2 T-Ring and 1.25-inch T-Adapter, showing both components.

4. Setup and Assembly

Follow these steps to assemble and attach the adapter to your camera and telescope:

4.1 Assembling the T-Ring and T-Adapter

  1. Locate the T2 T-Ring and the 1.25-inch T-Adapter.
  2. Thread the 1.25-inch T-Adapter into the T2 T-Ring. Ensure the threads are aligned correctly to avoid cross-threading. Tighten until snug, but do not overtighten.
Exploded view of T-Ring, T-Adapter, and camera

Image 4.1: Exploded view showing the T-Adapter, T-Ring, and a Canon EOS camera body.

4.2 Attaching to a Canon EOS DSLR Camera

  1. Remove the lens from your Canon EOS DSLR camera.
  2. Align the red dot on the T2 T-Ring with the red dot on your camera's lens mount.
  3. Twist the T-Ring clockwise until it clicks into place, securing it to the camera body.
SVBONY T-Adapter assembly attached to a Canon EOS camera

Image 4.2: The assembled T-Ring and T-Adapter attached to a Canon EOS camera.

4.3 Attaching to a Telescope

  1. Insert the 1.25-inch barrel of the T-Adapter (now attached to your camera) into the 1.25-inch focuser of your telescope.
  2. Secure the adapter in the focuser using the focuser's thumbscrews. Ensure it is held firmly to prevent movement or accidental drops.
Diagram showing T-Ring and T-Adapter connected to a telescope

Image 4.3: Illustration of the T-Ring and T-Adapter assembly connecting a camera to a telescope.

5. Operating Instructions

This adapter facilitates prime-focus astrophotography. Please note the following operational considerations:

  • Manual Focusing: The adapter does not provide electronic communication between the camera and the telescope. Focusing must be done manually using the telescope's focuser.
  • Aperture Control: Since there is no electronic connection, the camera's aperture cannot be controlled through the camera body. The telescope's aperture is fixed.
  • Exposure Settings: All exposure settings (ISO, shutter speed) must be adjusted manually on your camera.
  • Focusing Challenges: Some short-focus cameras or telescopes may have difficulty achieving focus. In such cases, an additional extension tube or a Barlow lens may be required to reach the focal plane.

6. Maintenance

Proper care will ensure the longevity and performance of your adapter:

  • Cleaning: Use a soft, dry cloth to wipe the metal surfaces. Avoid abrasive cleaners or solvents.
  • Storage: Store the adapter in a clean, dry environment when not in use. Keep dust caps on your camera and telescope focuser when the adapter is removed.
  • Inspection: Periodically check the threads for any debris or damage.

7. Troubleshooting

If you encounter issues, consider the following:

  • Cannot achieve focus:
    • Ensure the telescope focuser is moved through its full range.
    • For Newtonian telescopes, a Barlow lens or an extension tube might be necessary to reach prime focus.
    • For some refractor telescopes, an extension tube might be needed.
  • Loose connection between T-Ring and T-Adapter:
    • Ensure both parts are threaded correctly and tightened securely.
  • T-Ring not attaching to camera:
    • Verify that your camera is a Canon EOS DSLR with an EF mount. This adapter is not compatible with EOS-M models.
    • Ensure proper alignment of the red dots and twist until it clicks.

8. Specifications

BrandSVBONY
Model Number34299103A-W2054A
Mounting Type1.25 inch mount (for telescope), Canon EOS EF mount (for camera)
MaterialMetal
ColorBlack
Product Dimensions7.02"D x 5.85"W x 1.36"H (assembled, approximate)
Item Weight3.17 ounces
Special FeaturesManual focusing, tight fit, durable metal construction
UPC635266510323
Caliper measurements of SVBONY T-Adapter components

Image 8.1: Various dimensions of the T-Adapter components measured with calipers.

9. Warranty and Support

SVBONY provides the following warranty and support for this product:

  • Warranty Period: 1 year for SVBONY telescope accessories.
  • Return Policy: 30 days no-reason return.
  • Post-Warranty Service: Maintenance service is available beyond the warranty period; buyers are responsible for associated costs.
  • Contact Support: For assistance, please contact SVBONY through Amazon. Responses are typically provided within 12 hours.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.