UPBRIGHT Razor Power A2 13110002 Supply
UpBright AC/DC Adapter Instruction Manual
Model: Razor Power A2 13110002 Supply
Brand: UPBRIGHT
Introduction
This manual provides essential information for the safe and effective use of your UpBright AC/DC Adapter. This adapter is designed to be compatible with specific Razor Power A2 series electric folding kick scooters, including models 13110002 (Red) and 13110041 (Blue), which utilize a 22V Lithium-ion battery. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to your device.
Important Note: This adapter is NOT compatible with 12V versions of the Razor Power A2 scooter. Please check your scooter's voltage requirements carefully before connecting.
What's in the Box
- 1 x UpBright AC/DC Adapter
The package contains one UpBright AC/DC Adapter, ready for use with compatible devices.
Product Overview
This image displays the UpBright AC/DC Adapter, showing its compact black casing, standard US two-prong plug, and the attached power cord with a barrel connector tip. The adapter is labeled "UpBright AC/DC Adapter" with input specifications.
This image illustrates the UpBright AC/DC Adapter's compatibility with the Razor Power A2 Red Electric Folding Kick Scooter (Model 13110002). It shows the adapter alongside the scooter, highlighting its intended use.
This image demonstrates the UpBright AC/DC Adapter's compatibility with the Razor Power A2 Blue Electric Folding Kick Scooter (Model 13110041). The adapter is shown with the blue scooter, emphasizing its broad compatibility within the Power A2 series.
Setup
- Verify Compatibility: Before connecting, ensure your device (e.g., Razor Power A2 scooter) requires a 22V DC input and has a compatible barrel plug tip. This adapter is specifically designed for 22V Lithium-ion batteries.
- Connect to Device: Insert the barrel connector tip of the UpBright AC/DC Adapter firmly into the charging port of your compatible device.
- Connect to Power Outlet: Plug the AC adapter into a standard 100-240VAC, 50/60Hz wall outlet.
- Charging Indication: The device being charged may have an indicator light to show charging status. The UpBright adapter itself does not have a charging status indicator light.
Operating
The UpBright AC/DC Adapter functions as a power supply and battery charger. Once connected to a compatible device and a power outlet, it will begin supplying power or charging the device's battery.
- Power Supply: Provides continuous power to the device when plugged in.
- Battery Charging: Charges the device's internal battery. Charging time will vary depending on the battery's capacity and current charge level.
Maintenance
- Cleaning: Wipe the adapter with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use.
- Cable Care: Avoid sharp bends or kinks in the power cord. Do not place heavy objects on the cord.
- Inspection: Periodically inspect the adapter and cord for any signs of damage, such as frayed wires or cracked casing. Discontinue use immediately if damage is observed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging/powering on. | Incorrect voltage/compatibility. | Ensure your device requires 22V and is a compatible model (e.g., Razor Power A2 22V Li-ion). This adapter is not for 12V devices. |
| Device not charging/powering on. | Loose connection. | Ensure the barrel connector is fully inserted into the device and the AC plug is firmly in the wall outlet. |
| Device not charging/powering on. | Dead or old battery in device. | Rechargeable batteries have a limited lifespan (typically 1-3 years). If the battery is old or dead, it may not accept a charge. This is a battery issue, not a charger issue. A voltmeter can confirm if the charger is outputting power. |
| Adapter feels warm during use. | Normal operation. | It is normal for power adapters to generate some heat during operation. If it becomes excessively hot or emits smoke/smell, unplug immediately and discontinue use. |
Specifications
| Feature | Detail |
|---|---|
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 22V DC |
| Compatible Amperage | 2.15Ah (for Razor Power A2) |
| Connector Type | Barrel Connector |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Product Dimensions | 3 x 3 x 1 inches |
| Item Weight | 2.08 ounces |
| Manufacturer | UpBright |
Warranty and Support
UpBright offers a 30-day refund policy and a 24-month exchange warranty for this product. For support or warranty claims, please contact the seller directly or refer to the warranty information provided with your purchase.
For further assistance, you may visit the UPBRIGHT Store on Amazon.
This image shows a representation of the UpBright Limited Warranty Certificate, indicating the product comes with a warranty.
Related documentsRazor Power A2 13110002 Supply
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.