Reloop Beatmix 2 MK2 DJ Controller Instruction Manual

Introduction

The Reloop Beatmix 2 is a performance-oriented 2-channel pad controller designed for seamless integration with Serato DJ software. This controller provides a plug-and-play experience, allowing users to connect and begin mixing immediately. It combines extensive mixing functions with a well-designed performance pad section.

What's in the Box

• Reloop Beatmix 2 MK2 DJ Controller
• Serato DJ Lite Software (downloadable)
• USB Cord
• Quick Start Guide

Product Features

• 2-Channel Serato Performance Pad DJ Controller: Designed for two-deck control within Serato DJ Lite.
• Serato DJ Lite Included: Comes with the essential software to get started with digital DJing.
• Optimized for Club Use: Features and design are tailored for performance in live environments.
• Precise Beat Matching: Tools and controls are provided to assist with accurate beat synchronization.
• Extensive Mixing Functions: Offers a comprehensive set of controls for mixing audio tracks.
• Well-Thought-Out Performance Pad Section: Dedicated pads for triggering cues, loops, samples, and effects.

Setup Guide

1. Unpack the Controller: Carefully remove the Reloop Beatmix 2 MK2 controller, USB cable, and Quick Start Guide from the packaging.
2. Install Serato DJ Lite:
   • Visit the official Serato website (serato.com/dj/lite) to download the latest version of Serato DJ Lite.
   • Follow the on-screen instructions to install the software on your computer (Windows or macOS).
3. Connect the Controller:
   • Connect one end of the supplied USB cable to the USB port on the back of the Beatmix 2 MK2.
   • Connect the other end of the USB cable to an available USB port on your computer.
   • The controller is USB-powered and does not require an external power adapter.
4. Connect Audio Output:
   • Connect your speakers or sound system to the Master RCA outputs (L/R) on the rear panel of the controller.
   • For monitoring, connect headphones to the dedicated headphone jack on the front panel.
5. Launch Serato DJ Lite: Open Serato DJ Lite on your computer. The software should automatically detect and connect to the Beatmix 2 MK2.

Operating Instructions

The Reloop Beatmix 2 MK2 is designed for intuitive control over Serato DJ Lite. Familiarize yourself with the layout and functions below:

Deck Controls (Left and Right)

• Jog Wheels: Use the large, touch-sensitive jog wheels for scratching, nudging, and searching through tracks.
• Pitch Faders: Adjust the tempo (BPM) of your tracks.
• Play/Pause & Cue Buttons: Control track playback and set cue points.
• Sync Button: Automatically matches the BPM of the current track to the master deck.
• Performance Pads: The 16 multi-color drum pads offer various modes:
  • Hot Cue: Jump to predefined points in your track.
  • Loop: Create and trigger loops of various lengths.
  • Sampler: Trigger pre-loaded samples.
  • Effect: Apply and control various audio effects.

Mixer Section (Center)

• Channel Faders: Control the volume of each deck.
• Crossfader: Blend between Deck 1 and Deck 2.
• EQ Knobs (High, Mid, Low): Adjust the frequency bands for each channel.
• Filter Knobs: Apply high-pass or low-pass filters to each channel.
• Gain Knobs: Adjust the input level of each channel.
• Master Volume: Controls the overall output volume.
• Headphone Volume & Cue Mix: Adjust headphone monitoring levels and blend between cue and master output.

Effects Section

• Dedicated controls for selecting and applying effects to your tracks.
• Use the FX paddles to engage effects momentarily or latch them on.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the controller. Avoid abrasive cleaners or solvents.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid bending or crimping the USB cable excessively to prevent damage.

Troubleshooting

• Controller Not Detected:
  • Ensure the USB cable is securely connected to both the controller and your computer.
  • Try a different USB port on your computer.
  • Restart Serato DJ Lite and/or your computer.
• No Audio Output:
  • Check all audio cable connections (Master RCA to speakers, headphones).
  • Verify that the Master volume and individual channel faders on the controller are turned up.
  • Ensure your computer's audio output is correctly configured to use the Beatmix 2 MK2 as the sound device within Serato DJ Lite settings.
• Software Issues:
  • Ensure Serato DJ Lite is updated to the latest version.
  • Consult the Serato DJ Lite manual or support website for specific software troubleshooting.

Specifications

Warranty and Support

For warranty information, technical support, and further assistance, please visit the official Reloop website or contact their customer service department. Keep your proof of purchase for warranty claims.

Official Reloop Website: www.reloop.com