Introduction
Thank you for choosing the Invicta S1 Rally Analog Display Quartz Watch, Model 19326SYB. This manual provides essential information for the proper setup, operation, maintenance, and care of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
Image: The Invicta 19326SYB watch displayed on a wrist, showcasing its gold-tone case and black silicone band.
Setup
Unboxing and Initial Inspection
Upon receiving your Invicta watch, carefully remove it from its packaging. Inspect the watch for any visible damage. The watch is typically secured in a protective case.
Image: The Invicta watch's yellow protective case, open to reveal the interior padding designed to secure the timepiece during transport.
Setting the Time
- Pull the crown (the knob on the side of the watch) out to the second click position.
- Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the desired time.
- Push the crown back in to the normal position to start the watch.
Adjusting the Band
The Invicta 19326SYB features a silicone band with a buckle clasp. To adjust the fit, simply use the buckle to select the appropriate hole on the strap that provides a comfortable and secure fit on your wrist. Ensure the watch is not too tight to restrict circulation, nor too loose to slide freely.
Operating the Watch
Reading the Time
Your Invicta 19326SYB watch displays time using traditional hour, minute, and second hands on an analog dial.
Using the Chronograph Function
This watch is equipped with a chronograph (stopwatch) function. The specific operation may vary slightly, but generally involves:
- Start/Stop: Press the top pusher (button) to start and stop the chronograph.
- Reset: Press the bottom pusher to reset the chronograph hands to zero when the chronograph is stopped.
Refer to the markings on your watch dial for specific sub-dial functions (e.g., 60-second, 60-minute, 24-hour indicators).
Water Resistance Guidelines
Your watch has a water resistance rating of 100 meters (10 ATM). This means it is suitable for swimming and snorkeling, but not for diving. To maintain water resistance:
- Ensure the crown is always pushed in completely.
- Do not operate the crown or pushers while the watch is wet or submerged in water.
- Avoid exposing the watch to extreme temperature changes, which can affect seals.
Maintenance
Cleaning Your Watch
To keep your watch looking its best:
- Wipe the case and crystal with a soft, dry cloth.
- For the silicone band, use a mild soap and water solution with a soft brush, then rinse thoroughly and dry.
- Avoid using harsh chemicals or abrasive materials.
Battery Replacement
Your quartz watch is powered by a battery. When the battery runs low, the second hand may start to move in two-second intervals (End-of-Life indicator) or stop completely. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Storage
When not wearing your watch, store it in a cool, dry place away from direct sunlight and strong magnetic fields. The original protective case is ideal for storage.
Troubleshooting
- Watch Not Running: Check if the crown is pushed in completely. If the watch still does not run, the battery may need replacement.
- Incorrect Time: Ensure the crown is fully pushed in after setting the time. If the time is consistently incorrect, the watch may require servicing.
- Condensation Inside Crystal: This indicates a breach in the watch's water resistance. Immediately take the watch to a qualified technician for inspection and repair to prevent further damage.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 19326SYB |
| Brand | Invicta |
| Movement Type | Quartz |
| Display Type | Analog |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel Silicone |
| Case Diameter | 52 Millimeters |
| Case Thickness | 16 Millimeters |
| Band Width | 26 Millimeters |
| Water Resistance Depth | 100 Meters (10 ATM) |
| Crystal Type | Mineral |
| Item Weight | 408 Grams |
| Clasp Type | Buckle |
| Dial Color | Gold |
| Band Color | Black |
Image: A visual size guide illustrating different watch case diameters, providing a reference for the 52mm case of the Invicta 19326SYB.
Warranty and Support
Manufacturer's Warranty
Your Invicta 19326SYB watch is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. The warranty typically covers manufacturing defects but does not cover normal wear and tear, accidental damage, or damage resulting from improper use.
Customer Support
For technical assistance, warranty claims, or service inquiries, please contact Invicta customer support. You can usually find their contact information on the official Invicta website or in the documentation provided with your watch.
