Classic Accessories Veranda Round Patio Table & Chair Set Cover with Umbrella Hole Instruction Manual

1. Product Overview

The Classic Accessories Veranda Round Patio Table & Chair Set Cover is designed to protect your outdoor furniture from various elements. It features a durable Gardelle™ woven polyester fabric with a water-resistant laminated backing, ensuring reliable protection. This cover is specifically designed for round patio tables with an umbrella hole and accommodates up to four standard patio chairs.

Key Features:

• Gardelle™ Fabric System: Features a durable woven polyester fabric with a water-resistant laminated backing and a protective dark splash guard skirt.
• Integrated Umbrella Hole: Allows for coverage even with an umbrella in place.
• Click-Close Straps: Secure the cover to table legs on windy days.
• Elastic Hem Cord: Provides a tight, custom-like fit around the base of your furniture.
• Air Vents: Reduce inside condensation and minimize wind lofting.
• Padded Handles: Facilitate easy fitting and removal of the cover.

Image 1.1: The Veranda Round Patio Table & Chair Set Cover in use.

2. Setup and Installation

Proper installation ensures maximum protection and longevity of your patio furniture cover. This cover is designed for round patio tables and chairs, specifically fitting dimensions of 60 inches in diameter and 23 inches in height.

Measuring Your Furniture:

Before placing the cover, ensure your furniture dimensions are compatible. For round table and chair sets, measure the diameter to the outer edges of the chairs when tucked in. The height measurement is from the ground to the highest point of the furniture.

Image 2.1: Guide for measuring your patio furniture.

Placement Instructions:

1. Prepare Furniture: Ensure your patio table and chairs are clean and dry before covering. Tuck all chairs under the table as much as possible.
2. Position Cover: Carefully place the cover over the entire table and chair set. If an umbrella is present, guide the umbrella pole through the designated umbrella hole at the center of the cover.
3. Secure Umbrella Port: The umbrella port features a zippered opening and hook-and-loop closures to seal around the umbrella pole, preventing water entry.
4. Fasten Straps: Locate the click-close straps at the bottom of the cover. Fasten these straps around the table legs to secure the cover, especially during windy conditions.
5. Adjust Hem Cord: Tighten the elastic hem cord with the toggle to achieve a snug, custom-like fit around the base of your furniture.

3. Usage

Once installed, the Veranda cover provides continuous protection for your patio furniture. The design incorporates features for ease of use and enhanced durability.

Key Operational Features:

• Padded Handles: Use the padded handles located on the sides of the cover for easy placement and removal. This reduces strain and helps maintain the cover's integrity.
• Air Vents: The integrated air vents promote airflow, reducing condensation buildup under the cover and preventing mold and mildew growth. They also help to minimize wind lofting, keeping the cover securely in place.
• Secure Fasteners: Regularly check that the click-close straps are buckled and the elastic hem cord is tightened, especially before anticipated high winds or storms.

Image 3.1: Padded handles for easy handling.

Image 3.2: Securing the cover with click-close straps.

Image 3.3: Adjusting the elastic hem cord for a snug fit.

4. Care and Maintenance

Regular care and maintenance will extend the life of your Veranda patio furniture cover.

Cleaning Instructions:

• Spot Cleaning: For minor dirt or stains, use a soft brush or cloth with mild soap and lukewarm water. Gently scrub the affected area.
• Rinsing: Rinse thoroughly with clean water to remove all soap residue.
• Drying: Allow the cover to air dry completely before storing or reapplying to furniture. Do not machine wash or tumble dry.

Important Considerations:

• PVC Backing: The cover features a PVC-backed material. Some furniture finishes, sealants, or coatings may react with PVC-backed covers. To minimize this possibility, it is recommended to use a support pole (sold separately) to elevate the cover, preventing direct contact and promoting airflow.
• Water Resistance: The Gardelle™ fabric system is designed to be water-resistant, protecting your furniture from moisture.

Image 4.1: Water-resistant fabric surface.

5. Troubleshooting

Addressing common issues can help maintain the effectiveness of your cover.

Common Issues and Solutions:

• Water Pooling on Top: If water collects on the cover, it may indicate insufficient elevation. Consider placing a support pole (sold separately) or an inverted bucket/ball under the cover to create a peak, allowing water to run off.
• Cover Dislodges in Wind: Ensure all click-close straps are securely fastened around the table legs and the elastic hem cord is pulled tight. Check for any tears or damage that might compromise the fit.
• Condensation Under Cover: Verify that the air vents are clear and unobstructed. Ensure furniture is dry before covering. If condensation persists, consider using a support pole to improve airflow.
• Fading or Deterioration: While the cover is designed for outdoor use, prolonged exposure to extreme UV rays can affect its appearance over time. Regular cleaning and proper storage during off-seasons can help.

6. Product Specifications

7. Warranty and Support

Warranty Information:

This Classic Accessories Veranda patio furniture cover comes with a Two-Year Limited Warranty. This warranty protects against defects in materials and workmanship under normal use. If your product experiences a failure within the warranty period, Classic Accessories offers a straightforward warranty program.

Customer Support:

For warranty claims, product inquiries, or additional support, please visit the official Classic Accessories website. Their US-based customer service team is available to assist you.