Introduction
The RadioShack 1500320 A/V Distribution Amplifier Splitter is designed to distribute a single audio/video signal to multiple output devices. This unit can connect one A/V source, such as a VCR or DVD player, to up to four VCRs, TVs, or monitors. It also features the ability to convert composite video input to S-Video output, or S-Video input to four S-Video or composite outputs, while maintaining signal strength.
Key Features
- Distributes a single A/V signal to four separate components.
- Converts composite video input to S-Video output.
- Maintains consistent A/V signal strength across all outputs.
Package Contents
Verify that your package contains the following items:
- RadioShack 1500320 A/V Distribution Amplifier Splitter
- Power Adapter (DC 12V)
- User Manual (this document)

Image: Retail packaging for the RadioShack 1500320 A/V Distribution Amplifier Splitter, showing the product name and key features on the box.
Setup Instructions
Follow these steps to properly set up your A/V Distribution Amplifier Splitter:
- Placement: Position the amplifier on a stable, flat surface near your A/V source and output devices. Ensure adequate ventilation.
- Connect A/V Source: Connect your A/V source (e.g., DVD player, VCR) to the INPUT jacks on the amplifier.
- For composite video, connect the yellow RCA cable to the "VIDEO" input.
- For S-Video, connect the S-Video cable to the "S-VIDEO" input.
- For audio, connect the red RCA cable to "R" (Right) and the white RCA cable to "L" (Left) audio inputs.
- Connect Output Devices: Connect up to four output devices (e.g., TVs, monitors, VCRs) to the OUTPUT jacks. Each output set (1-4) includes connections for video, S-Video, and L-Audio-R.
- Connect the corresponding video, S-Video, and audio cables from the amplifier's outputs to your display or recording devices.
- The amplifier can convert composite video to S-Video, or S-Video to composite video, depending on the input and output connections used.
- Connect Power: Insert the DC 12V power adapter into the "DC 12V" jack on the amplifier, then plug the adapter into a standard electrical outlet.
- Power On: Turn on your A/V source and all connected output devices. The amplifier does not have a separate power switch; it powers on when connected to an electrical outlet.

Image: Top and bottom views of the RadioShack 1500320 A/V Distribution Amplifier Splitter, highlighting the DC 12V power input, single A/V and S-Video input, and four sets of A/V and S-Video outputs.
Operating Instructions
Once the amplifier is set up, operation is straightforward:
- Signal Distribution: The amplifier automatically distributes the input A/V signal to all four output channels simultaneously. There are no switches or controls for selecting individual outputs.
- Video Conversion: The unit automatically handles video signal conversion. If you input a composite video signal, you can output it as composite video or S-Video from any of the four output sets. Similarly, an S-Video input can be output as S-Video or composite video.
- Signal Integrity: The amplifier is designed to maintain the strength and quality of the A/V signal, preventing degradation that can occur with passive splitters over multiple connections.
Maintenance
To ensure optimal performance and longevity of your amplifier:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or solvents.
- Ventilation: Ensure that the ventilation openings are not blocked. Avoid placing the unit in enclosed spaces or on soft surfaces that may obstruct airflow.
- Cable Connections: Periodically check all cable connections to ensure they are secure. Loose connections can lead to signal loss or interference.
- Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No video or audio output. |
|
|
| Poor video or audio quality (e.g., fuzzy picture, static sound). |
|
|
| Buzzing noise in audio. |
|
|
Specifications
| Model Number | 1500320 |
| Input | 1 x Composite Video, 1 x S-Video, 1 x Stereo Audio (L/R) |
| Output | 4 x Composite Video, 4 x S-Video, 4 x Stereo Audio (L/R) |
| Power Supply | DC 12V |
| Dimensions (H x W x D) | 7 x 1.2 x 8.5 inches (approximate) |
| Weight | 1 pound (approximate) |
| Manufacturer | RadioShack |
Warranty and Support
Specific warranty information for the RadioShack 1500320 A/V Distribution Amplifier Splitter is not available in this document. For warranty details or technical support, please refer to the original product packaging or contact RadioShack customer service directly.