XCSOURCE Scart to HDMI Converter AH35

1. Introduction

The XCSOURCE Scart to HDMI Converter, Model AH35, is designed to convert analog Scart signals (RGB or composite video) into a digital HDMI output. This device allows older Scart-enabled equipment, such as DVD players, set-top boxes, and retro gaming consoles, to be connected to modern HDMI displays like HDTVs and projectors. It supports output resolutions of 720p or 1080p and integrates Scart audio into the HDMI stream, while also providing separate 3.5mm analog and coaxial digital audio outputs for enhanced audio connectivity.

2. Package Contents

Please check the package for the following items:

• 1 x XCSOURCE Scart to HDMI Converter (Model AH35)
• 1 x Power Adapter (EU Plug)
• 1 x User Manual

Image: The XCSOURCE Scart to HDMI Converter unit shown alongside its included EU power adapter.

3. Product Features

• Converts Scart analog signals (RGB or composite video) to HDMI 720p or 1080p output.
• HDMI output resolutions: 720P @ 50/60Hz, 1080P @ 50/60Hz.
• Scart audio is integrated into the HDMI output.
• Provides separate 3.5mm analog audio output for headphones or amplifiers.
• Provides coaxial digital audio output for digital audio amplifiers.
• Automatically detects RGB (50/60Hz) and composite video (NTSC/PAL) input formats.
• Automatic adjustment of output resolution.
• Compatible with various DVI formats via HDMI input: 800x600, 1024x768, 1280x1024, 1360x768, 1680x1050, 1920x1080.

4. Physical Interface Diagram

Image: A schematic diagram illustrating the various input and output ports on the converter unit.

1. HDMI Input: HDMI signal input interface.
2. SCART Input: SCART signal input interface.
3. DC/5V: DC power input interface.
4. Power: Power indicator LED.
5. HDMI Output: HDMI signal output interface.
6. Audio: Analog audio output interface (3.5mm jack).
7. Coaxial: Coaxial digital audio output interface.
8. SCART (CVBS)/HD: SCART or HDMI input switching button.
9. 720P/1080P: 720p or 1080p HDMI output resolution switching button.
10. PAL/NTSC (50Hz/60Hz): 50Hz or 60Hz HDMI output state button.

Image: Top and bottom views of the converter, highlighting the HDMI input, SCART input, DC 5V power port, HDMI output, 3.5mm audio, coaxial audio, and control buttons.

5. Setup Instructions

Follow these steps to connect your Scart to HDMI converter:

1. Connect Scart Source: Plug the Scart cable from your source device (e.g., DVD player, VCR, game console) into the SCART Input port on the converter.
2. Connect HDMI Display: Connect an HDMI cable from the HDMI Output port on the converter to an HDMI input port on your TV, monitor, or projector.
3. Connect Audio (Optional):
   • For analog audio, connect a 3.5mm audio cable from the Audio port on the converter to your amplifier or headphones.
   • For digital audio, connect a coaxial cable from the Coaxial port on the converter to a digital audio amplifier.
4. Connect Power: Plug the included 5V DC power adapter into the DC/5V port on the converter, then plug the adapter into a power outlet. The Power LED will illuminate.
5. Select Input: Turn on your source device and your HDMI display. Use the SCART (CVBS)/HD button on the converter to select the appropriate input (Scart).

Image: A detailed view of the converter's input and output ports, including Scart, HDMI, 3.5mm audio, coaxial, and power input, along with the control buttons.

6. Operating Instructions

Once the converter is set up, operate it as follows:

• Input Selection: Press the SCART (CVBS)/HD button to toggle between Scart input and HDMI input (if an HDMI source is also connected). Ensure the correct input is selected for your source device.
• Resolution Selection: Press the 720P/1080P button to switch the HDMI output resolution between 720p and 1080p. Select the resolution best suited for your display.
• PAL/NTSC Selection: Use the PAL/NTSC (50Hz/60Hz) button to select the appropriate video standard (PAL or NTSC) and refresh rate (50Hz or 60Hz) for your region or source device. The converter typically auto-detects, but manual adjustment may be necessary in some cases.
• The converter automatically detects RGB (50/60Hz) or composite video (NTSC/PAL) from the Scart input.
• The device will automatically store the last selected output resolution setting.

7. Troubleshooting

If you encounter issues, refer to the following troubleshooting tips:

• No Picture on Display:
  • Ensure all cables (Scart, HDMI, power) are securely connected.
  • Verify the power adapter is plugged in and the Power LED on the converter is lit.
  • Check that your TV/monitor is set to the correct HDMI input channel.
  • Press the SCART (CVBS)/HD button to ensure the Scart input is selected.
  • Try pressing the 720P/1080P button to switch resolutions, as your display might not support the current output resolution.
  • Ensure the source device is powered on and outputting a signal.
• Poor Picture Quality:
  • Check the quality of your Scart and HDMI cables. Damaged or low-quality cables can affect signal integrity.
  • Ensure the PAL/NTSC (50Hz/60Hz) setting matches your source device's output.
  • Try switching between 720p and 1080p output resolutions using the 720P/1080P button.
• No Audio:
  • Verify that your HDMI display's audio is not muted or set to a very low volume.
  • If using the 3.5mm or coaxial audio outputs, ensure they are correctly connected to an active audio system and that the audio system is powered on and set to the correct input.
  • Some Scart sources may not output audio correctly; test with another source if possible.
• Intermittent Signal:
  • Ensure the power supply is stable and not interrupted.
  • Check for loose cable connections.

8. Specifications

9. Maintenance

To ensure the longevity and optimal performance of your converter:

• Keep the device in a cool, dry place, away from direct sunlight, high temperatures, and humidity.
• Avoid exposing the converter to water or other liquids.
• Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Do not attempt to open or modify the converter, as this will void the warranty and may cause damage.
• Disconnect the power adapter when the device is not in use for extended periods.

10. Warranty and Support

This XCSOURCE product comes with a limited warranty. Please refer to the warranty information provided at the time of purchase for specific terms and conditions.

For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.