1. Product Overview
1.1 Product Description
The Makita 520076-6 Field Assembly is an original equipment manufacturer (OEM) authorized replacement part. This component is designed to fit various Makita power tool models, ensuring compatibility and proper function. It is manufactured in the United States.
1.2 Key Features
- Genuine OEM authorized part.
- Designed for compatibility with various Makita models.
- Direct replacement for part number 520076-6.
- Ensures proper function and performance of the power tool.
Figure 1: Image of the Makita 520076-6 Field Assembly. This component is a critical internal part of certain Makita power tools, typically involved in the motor's electrical system.
2. Installation Instructions
Installation of the Makita 520076-6 Field Assembly requires technical knowledge and should only be performed by qualified personnel or individuals experienced in power tool repair. Incorrect installation can lead to tool malfunction, damage, or personal injury.
2.1 Safety Precautions
- Disconnect Power: Always ensure the power tool is unplugged from its power source or its battery pack is removed before beginning any disassembly or installation.
- Wear Protective Gear: Use appropriate personal protective equipment, such as safety glasses and gloves.
- Refer to Tool Manual: Consult the specific service manual for your Makita power tool model for detailed disassembly and reassembly procedures.
- Work in a Clean Area: Perform work in a well-lit, clean, and organized environment to prevent loss of small parts.
2.2 General Installation Steps
- Disassembly: Carefully disassemble the power tool according to its service manual to access the existing field assembly.
- Remove Old Part: Disconnect any wires or fasteners securing the old field assembly and remove it. Note the orientation and connections for proper reassembly.
- Install New Part: Position the new Makita 520076-6 Field Assembly in its correct location. Ensure all connections are secure and properly seated.
- Reassembly: Reassemble the power tool, ensuring all screws, covers, and components are correctly installed and tightened.
- Test: Before full operation, perform a brief test of the tool to ensure the new part functions correctly and there are no unusual noises or behaviors.
3. Operation
The Makita 520076-6 Field Assembly is an internal component of a power tool. It does not have independent operational controls. Its function is integrated into the overall operation of the power tool it is installed within. Refer to the instruction manual of your specific Makita power tool for operational guidelines.
4. Maintenance
As an internal component, the field assembly typically requires minimal direct user maintenance. However, proper care of the power tool it is installed in will contribute to its longevity.
- Regular Cleaning: Keep the exterior of your power tool clean and free from dust and debris.
- Inspection: Periodically inspect the tool for any signs of wear or damage. If the tool exhibits reduced performance or unusual sounds, professional inspection may be required.
- Storage: Store the power tool in a dry, clean environment, away from extreme temperatures and moisture.
5. Troubleshooting
If your power tool is not functioning correctly after replacing the field assembly, consider the following:
- Incorrect Installation: Double-check all connections and ensure the field assembly is correctly seated and secured according to the tool's service manual.
- Damaged Wires: Inspect all wires and connections for any signs of pinching, fraying, or improper contact.
- Other Component Failure: The issue might stem from another component within the power tool, not necessarily the newly installed field assembly.
- Professional Assistance: If troubleshooting steps do not resolve the issue, it is recommended to seek assistance from a qualified power tool technician or authorized Makita service center.
6. Product Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Makita |
| Part Number | 520076-6 |
| Item Model Number | 520076-6 |
| Item Weight | 1.01 pounds |
| Product Dimensions | 1 x 1 x 1 inches |
| Item Package Quantity | 1 |
| Batteries Required? | No |
| ASIN | B010BX3TBW |
| Date First Available | June 18, 2015 |
7. Warranty and Support
This Makita 520076-6 Field Assembly is covered by Makita's standard warranty for genuine replacement parts. For specific warranty terms and conditions, please refer to the official Makita website or contact Makita customer support directly. For technical assistance or service, please contact an authorized Makita service center.
Makita Official Website: www.makitatools.com
