Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Vaxcel Bozeman 3-Light Flush Mount fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Figure 1: Vaxcel Bozeman 3-Light Flush Mount fixture. This image displays the overall design, highlighting the burnished bronze finish and the white tiffany style glass panels featuring silhouetted bear and tree imagery.
The Vaxcel Bozeman 3-Light Flush Mount is a rustic-themed lighting fixture designed to complement various home styles, particularly those with a lodge or cabin aesthetic. It features a burnished bronze finish and glowing white tiffany style glass panels adorned with silhouetted bear imagery. This fixture utilizes medium screw base lamping for optimal light output and bulb choice flexibility.
Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse box or circuit breaker before installing or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about proper installation.
- Use only UL listed wire connectors.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage.
What's in the Box
Carefully unpack your fixture and check that all parts are included. Keep all packaging materials until you are sure all parts are present and in good condition.
- Vaxcel Bozeman 3-Light Flush Mount Fixture
- Mounting Hardware (screws, wire nuts, mounting bracket)
- Instruction Manual (this document)
Setup and Installation
Assembly is required for this fixture. Follow these steps for proper installation:
- Turn Off Power: Before starting any electrical work, ensure the power supply to the junction box is turned off at the circuit breaker or fuse box.
- Prepare Mounting: Attach the mounting bracket (included in mounting hardware) to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- Make Electrical Connections:
- Connect the bare copper ground wire from the fixture to the green or bare copper ground wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Secure Fixture: Carefully push the wired fixture up to the ceiling, aligning the mounting holes on the fixture with the screws on the mounting bracket. Secure the fixture to the mounting bracket using the decorative nuts or screws provided.
- Install Bulbs: Insert three (3) A19 medium screw base bulbs (not included) into the sockets. Do not exceed the maximum wattage of 60 Watts per bulb.
- Attach Shade: Secure the glass shade to the fixture according to the specific design. This typically involves twisting or securing with small screws or clips.
Figure 2: Detailed view of the fixture's glass panel. This image provides a closer look at the intricate bear silhouette and the texture of the white tiffany style glass, which forms the shade of the light.
Operating Instructions
Once installed, the Vaxcel Bozeman 3-Light Flush Mount operates like any standard ceiling light fixture controlled by a wall switch.
- Power On/Off: Use the wall switch connected to the fixture to turn the lights on or off.
- Dimmable Feature: This fixture is dimmable. If you wish to utilize the dimming feature, ensure you use dimmable bulbs and connect the fixture to a compatible dimmer switch (sold separately).
- Bulb Replacement: To replace bulbs, ensure the power is off at the wall switch and, if possible, at the circuit breaker. Allow bulbs to cool before removing. Replace with new A19 medium screw base bulbs, not exceeding 60 Watts per bulb.
Maintenance
Regular cleaning will help maintain the appearance and performance of your light fixture.
- Cleaning: Always ensure the power is turned off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Glass Care: The tiffany style glass can be gently wiped with a damp cloth if necessary, then immediately dried with a soft, lint-free cloth.
Troubleshooting
If you experience issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is on. |
| Loose wire connections. | Turn off power, check and tighten all wire connections. | |
| Bulb is faulty or not installed correctly. | Replace bulb or ensure it is screwed in tightly. | |
| Light flickers. | Loose bulb or wiring. | Turn off power, check bulb tightness and wire connections. |
| Incompatible dimmer switch or non-dimmable bulbs (if using a dimmer). | Ensure dimmer switch is compatible with LED/CFL bulbs if used, or replace with dimmable bulbs. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | CC55714BBZ |
| Brand | VAXCEL |
| Dimensions (L x W x H) | 14"L x 14"W x 5.75"H |
| Weight | 3.08 pounds |
| Finish | Burnished Bronze |
| Material | Alloy Steel, Glass |
| Style | Traditional, Rustic |
| Light Fixture Form | Ceiling (Flush Mount) |
| Number of Light Sources | 3 |
| Bulb Base | E26 Medium |
| Max Wattage per Bulb | 60 Watts |
| Voltage | 120 Volts |
| Special Feature | Dimmable |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
| Certification | UL Listed |
Warranty and Support
This product comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation provided with your purchase or contact VAXCEL customer support directly.
For technical assistance or further inquiries, please visit the VAXCEL official website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
