Introduction
The XFX AMD Radeon R9 Fury X graphics card is the world's first total solution GPU with AMD-pioneered High-Bandwidth Memory (HBM) on-chip, designed to deliver extreme 4K performance and immersive VR experiences. This manual provides essential information for the proper installation, operation, and maintenance of your graphics card.
What's in the Box
- XFX RADEON R9 FURY X Graphics Card
- Drivers & Utilities CD
- AMD Catalyst Control Center Software
- 6-pin to 4-pin Power Cable Adapter
- 8-pin to 6-pin Power Cable Adapter
- PSU Cross Marketing Insert
Setup and Installation
Proper installation is crucial for optimal performance and cooling. Please follow these steps carefully:
- System Preparation: Ensure your computer is powered off and unplugged. Open your PC case.
- Radiator Placement: The RADEON R9 FURY X features an integrated liquid cooling system with a radiator. You will need an open fan bay in your case (typically a 120mm or 140mm bay) to mount the radiator. It is recommended to install the radiator horizontally for optimal pump performance. You may need to remove an existing case fan to accommodate the radiator.
- Power Supply Requirements: This graphics card requires two 8-pin PCI Express power connectors. Verify that your power supply unit (PSU) has these connectors available or use the provided adapters if necessary. Ensure your PSU has sufficient wattage for your system, including the graphics card.
- PCI Express Slot: The graphics card should be installed in the top PCI Express x16 slot on your motherboard, which is typically the slot closest to the CPU. Ensure this slot is clear and ready to accept the new card.
- Temporary Radiator Placement: Before inserting the GPU, place the radiator and fan in a safe, stable spot within the case where it won't move or interfere with the GPU installation.
- Insert GPU: Carefully align the graphics card with the top PCI Express x16 slot and press down firmly until it is fully seated. The retention clip on the motherboard slot should click into place.
- Secure GPU: Secure the graphics card to the case with a thumb screw or a standard screw provided with your case.
- Mount Radiator: Position the radiator in the chosen fan bay (e.g., front of the case) and secure it using the screws provided with your case or the radiator mounting hardware. Ensure the fan is oriented to exhaust air out of the chassis.
- Connect Power: Connect the two 8-pin PCI Express power cables from your PSU to the corresponding ports on the graphics card.
- Close Case and Power On: Close your PC case, reconnect all peripherals, and power on your system. Install the latest drivers from the XFX or AMD website.

Figure 1: XFX RADEON R9 FURY X Graphics Card Dimensions

Figure 2: XFX RADEON R9 FURY X Top View
Installation Video Guide
Video: Step-by-step guide on installing the AMD Radeon R9 Fury X GPU, including radiator and power connections.
Operating Your Graphics Card
The XFX RADEON R9 FURY X is designed for high-performance computing and gaming. Key features include:
- Liquid Cooled: Integrated liquid cooling ensures efficient heat dissipation for sustained performance.
- High Bandwidth Memory (HBM) Design: Advanced memory architecture for superior data throughput.
- 4K Resolutions Ready: Capable of delivering high frame rates at 4K resolution for an immersive visual experience.
- DirectX 12 Ready: Optimized for the latest graphics APIs to enhance gaming performance and visual fidelity.
- Windows 10 Ready: Fully compatible with Microsoft Windows 10 operating system.
- AMD FreeSync Technology: Supports FreeSync monitors for tear-free and stutter-free gaming.
- AMD's Liquid Technology: Leverages AMD's expertise in liquid cooling solutions for graphics cards.
For optimal performance, ensure your operating system and graphics drivers are always up to date. Utilize the AMD Catalyst Control Center for fine-tuning settings and monitoring your GPU.
Maintenance
To ensure the longevity and consistent performance of your liquid-cooled graphics card, consider the following maintenance tips:
- Dust Management: Regularly clean the radiator fins and fan blades to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air for best results.
- Inspect Hoses: Periodically check the liquid cooling hoses for any signs of kinks, leaks, or damage.
- Airflow: Ensure your PC case has adequate airflow to support the liquid cooling system. Proper intake and exhaust fan configuration is important.
- Driver Updates: Keep your graphics drivers updated to benefit from performance improvements and bug fixes.
Troubleshooting
If you encounter issues with your XFX RADEON R9 FURY X graphics card, consider the following:
- No Display/System Instability:
- Ensure the graphics card is fully seated in the PCIe slot.
- Verify that both 8-pin PCIe power connectors are securely attached.
- Check that your monitor cable is connected to the graphics card, not the motherboard's integrated graphics port.
- Driver Issues:
- If experiencing issues after a Windows update (e.g., Windows 10), perform a clean installation of the latest AMD drivers. Uninstall previous drivers using a utility like DDU (Display Driver Uninstaller) before installing new ones.
- Ensure you download drivers specifically for your operating system version.
- Unusual Noises (e.g., Coil Whine, Pump Noise):
- Some graphics cards may exhibit coil whine under heavy load. While often harmless, ensure your PSU is stable and provides clean power.
- Pump noise from the liquid cooling system is normal during operation. If it becomes excessively loud or changes in pitch, ensure the radiator is securely mounted and free of obstructions.
- Overheating:
- Verify that the radiator fan is spinning and not obstructed.
- Ensure proper case airflow.
- Clean any dust from the radiator fins.
Specifications
| Feature | Specification |
|---|---|
| Brand | XFX |
| Item Model Number | R9-FURY-4QFA |
| Graphics Coprocessor | AMD Radeon |
| Chipset Brand | AMD |
| Graphics Card RAM Size | 4 GB |
| Memory Speed | 500 MHz |
| Max Screen Resolution | 4096x2160 |
| Video Output Interface | HDMI, DisplayPort (3xDP) |
| Item Weight | 4.4 pounds |
| Product Dimensions (LxWxH) | 11.61 x 1.65 x 5.63 inches |
| Date First Available | June 24, 2015 |
Warranty and Support
XFX products are designed for reliability and performance. For specific warranty details, please refer to the warranty information included with your product or visit the official XFX website. In case of technical issues or support inquiries, please contact XFX customer support through their official channels.