Introduction
This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your Sauter SPI4360W Induction Hob. Please read this manual thoroughly before using the appliance and keep it for future reference.
Safety Information
Your safety and the safety of others are paramount. Please observe all safety warnings and precautions outlined in this section.
- Ensure the appliance is installed by a qualified technician.
- Do not touch hot surfaces. Always use oven mitts or pot holders.
- Supervise children closely when the appliance is in use.
- Do not store flammable materials near the hob.
- Disconnect the appliance from the power supply before cleaning or maintenance.
- This appliance is designed for domestic use only.
- The hob features a Pack 10 Safety System including: heat indicator, small object safety, anti-overflow, auto-stop system, keypad lock, automatic detection, anti-overheating, low voltage detection, bad connection detection, and overvoltage detection.

Image: Diagram illustrating the 10 safety features of the Sauter induction hob, including heat indicator, small object safety, anti-overflow, auto-stop, keypad lock, automatic detection, anti-overheating, low voltage detection, bad connection detection, and overvoltage detection.
Setup and Installation
The Sauter SPI4360W Induction Hob is designed for built-in installation. Proper installation is crucial for safety and optimal performance.
Installation Dimensions
- Built-in Dimensions: 56 cm (width) x 49 cm (depth)
- Above Worktop Dimensions: 60 cm (width) x 51 cm (depth)
- Ensure adequate ventilation around the appliance.
- The appliance must be connected to a suitable electrical supply by a qualified electrician.

Image: Diagram showing the built-in dimensions of the Sauter induction hob, indicating a width of 56 cm and a depth of 49 cm for the cutout.
Operating Instructions
Your Sauter SPI4360W Induction Hob offers efficient and precise cooking with its advanced features.
Cooking Zones and Power Levels
The hob features three induction cooking zones with dedicated controls:
- Large Zone: 28 cm diameter, up to 4000 W for intense cooking or large pots.
- Medium Zone: 21 cm diameter.
- Small Zone: 16 cm diameter.
The hob provides 14 cooking positions, allowing precise temperature control for various culinary tasks, from gentle simmering to rapid frying.

Image: Overhead view of the Sauter induction hob showing the three cooking zones with their respective diameters: 16 cm, 18 cm, and 28 cm (4000W). Note: The 18cm zone in the image corresponds to the 21cm zone in the specifications.
Touch Controls and Easycook Technology
The hob is operated via sensitive touch controls. Each cooking zone has its own dedicated controls for power adjustment and timer settings.
- Power On/Off: Press the main power button to activate or deactivate the hob.
- Zone Selection: Select the desired cooking zone by touching its corresponding control area.
- Power Adjustment: Use the '+' and '-' buttons or slider (if present) to set the desired power level (1-14).
- Direct Access: Utilize the three direct access settings: Gentle, Vigorous, and Boost for quick power selection.
- Timer Function: Set a cooking timer for each zone independently. The timer will automatically switch off the cooking zone when the set time expires.
- Easycook Technology: This feature helps identify the ideal cooking zone based on the diameter of your cookware, ensuring efficient heating and faster temperature achievement.

Image: Close-up view of the Sauter induction hob's touch control panel, showing individual controls for each cooking zone, power level indicators, and timer functions.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your induction hob.
- Always disconnect the hob from the power supply before cleaning.
- Allow the hob to cool completely before cleaning.
- For daily cleaning, wipe the glass surface with a soft cloth and a mild detergent.
- For stubborn stains, use a specialized ceramic hob cleaner and a scraper designed for glass surfaces.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the glass surface.
- Ensure no water or cleaning agents seep into the control panel area.
Troubleshooting
Before contacting customer support, please refer to the following common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hob does not turn on. | No power supply; Keypad lock activated. | Check power connection; Deactivate keypad lock (refer to operating instructions). |
| Cooking zone not heating. | Incorrect cookware; Cookware not centered; Small object detected. | Use induction-compatible cookware; Center the pot on the zone; Remove any small objects from the hob surface. |
| Display shows an error code. | Internal fault; Overheating; Voltage issue. | Turn off the hob, wait a few minutes, then restart. If the error persists, contact customer support. |
| Unusual noise during operation. | Normal fan operation; Cookware vibration. | A low hum or fan noise is normal for induction hobs. Some cookware may vibrate slightly. If the noise is excessive or unusual, contact support. |
Specifications
Detailed technical specifications for the Sauter SPI4360W Induction Hob.
| Feature | Detail |
|---|---|
| Brand | Sauter |
| Model Number | SPI4360W |
| Product Type | Induction Hob |
| Installation Type | Built-in |
| Color | White |
| Number of Heating Elements | 3 |
| Large Zone Diameter | 28 cm (up to 4000 W) |
| Medium Zone Diameter | 21 cm |
| Small Zone Diameter | 16 cm |
| Total Power Output | 7200 W |
| Power Source | Electric cable |
| Voltage | 240 Volts |
| Control Type | Touch |
| Material | Tempered glass |
| Product Dimensions (D x W x H) | 52 cm x 60 cm x 5.9 cm |
| Built-in Dimensions (W x D) | 56 cm x 49 cm |
| Item Weight | 10460 Grams |
| Special Features | Sensitive keys, 14 cooking positions, Easycook technology, 10 safety features |
Warranty and Support
Sauter is committed to providing high-quality products and customer satisfaction.
Product Origin and Guarantee
Your Sauter SPI4360W Induction Hob is manufactured in France, with factories located in Orléans and Vendôme. Sauter has been certified for its expertise since 2011.
The product is designed for reparability and comes with a 20-year availability of spare parts.

Image: Map of France highlighting Orléans, indicating the product's origin. Text states "PRODUCT MANUFACTURED LESS THAN 1000KM" and "20 YEARS OF AVAILABILITY OF SPARE PARTS", along with "ORIGIN FRANCE GUARANTEE".
Customer Support
For any questions, technical assistance, or warranty claims, please contact Sauter customer service. Refer to your purchase documentation for specific contact details or visit the official Sauter website.