PROLINE PRM154330
Contents
ProLine 154330 Cadillac ATS-V.R Clear Body Instruction Manual
Introduction
This manual provides instructions for the ProLine 154330 Cadillac ATS-V.R Clear Body, a 1/10 scale, 190mm touring car body. This product is an officially-licensed replica of the Cadillac ATS-V.R race car, designed for use in RC racing classes such as USGT, GT10, and Spec Grand Touring.
The body is constructed from .030" polycarbonate and includes injection-molded wing struts and a rear wing with two trim levels (10mm for sanctioned USGT racing and 20mm for club racing). Wing mounting hardware and paint-then-peel overspray film are included. This product is supplied as a clear, unpainted body; a vehicle chassis is not included.

Image: The ProLine 154330 Cadillac ATS-V.R Clear Body, shown here painted and assembled on an RC car chassis, demonstrating its detailed replica design and racing aesthetics.
Safety Information
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision.
Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
Assembly Instructions
Follow these steps to prepare and mount your ProLine Cadillac ATS-V.R Clear Body:
- Clean the body thoroughly and apply the included window masks.
- Apply paint to the inside of the body, then peel off the overspray film once dry.
- Apply the included decal sheet to customize your body.
- Mount the finished body onto your RC car chassis.
Product Features
- Replica body of the Cadillac Racing GT3-spec Race Car.
- Includes molded wing struts and a dual-trim wing design.
- Officially-licensed by General Motors.
- Features two different wing trim options for USGT or Club Racing.
- USGT Approved for sanctioned racing.
What's in the Box
- 1 x ProLine Cadillac ATS-V.R Clear Body, 190mm
Specifications
| Attribute | Value |
|---|---|
| Product Dimensions | 21.3 x 11.1 x 2.41 inches |
| Item Weight | 8 ounces |
| Model Number | PRM154330 |
| Manufacturer | Proline |
| Recommended Age | 14 years and up |
| Date First Available | June 17, 2015 |
Maintenance
To ensure the longevity and appearance of your ProLine Cadillac ATS-V.R Clear Body, regular maintenance is recommended. Clean the body with a soft cloth and mild soap and water. Avoid harsh chemicals or abrasive materials that could damage the polycarbonate or paint. Store the body in a cool, dry place away from direct sunlight to prevent material degradation and color fading.
Troubleshooting
This section addresses common issues that may arise during the assembly or use of your clear body.
- Fitment Issues: If the body does not fit your chassis correctly, carefully re-check the mounting points and trim lines. Minor adjustments may be necessary. Ensure the body posts are correctly aligned with the body's mounting holes.
- Paint Adhesion Problems: Ensure the inside of the body was thoroughly cleaned before painting. Any oils or residues can prevent paint from adhering properly. Always use paints specifically designed for polycarbonate RC bodies.
- Decal Application Issues: Apply decals to a clean, dry surface. Use a squeegee or soft cloth to remove air bubbles. For complex curves, small cuts in the decal may help it conform better.
Warranty and Support
For warranty information or technical support regarding your ProLine 154330 Cadillac ATS-V.R Clear Body, please contact the manufacturer, ProLine, or their authorized distributor, Horizon Hobby, LLC. Refer to the product packaging or the manufacturer's official website for the most current contact details and warranty policy.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.