Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your PDP Afterglow LVL 3 Stereo Gaming Headset, Model 051-032. Please read this manual thoroughly before using your headset to ensure optimal performance and longevity.
Package Contents
- PDP Afterglow LVL 3 Stereo Gaming Headset
- Integrated Cable with 3.5mm Jack
Product Overview
Familiarize yourself with the components of your Afterglow LVL 3 headset.
Image 1: Front view of the PDP Afterglow LVL 3 Stereo Gaming Headset, showing the earcups, headband, and flexible microphone arm.
Image 2: Diagram illustrating the dimensions of the headset, including height, width, and microphone length.
Image 3: Close-up view of the headset's lightweight frame and pillow-cushioned earcups, highlighting comfort features.
Image 4: Detailed view of the in-line controls on the headset cable, showing the volume wheel and mute switch.
Image 5: Illustration of the flexible microphone, demonstrating its ability to be molded and flipped up when not in use.
Setup Instructions
- Connect to Controller: Locate the 3.5mm audio jack on your PlayStation 4 controller.
- Insert the 3.5mm audio plug from the Afterglow LVL 3 headset cable directly into the controller's audio jack. Ensure the connection is secure.
Image 6: The 3.5mm audio jack being connected to a PlayStation 4 controller.
Note: For optimal audio, ensure your PlayStation 4 audio output settings are configured correctly for headset use. This typically involves setting "Output to Headphones" to "All Audio" in the PS4's Quick Menu or Sound & Screen settings.
Operating Instructions
Volume Control
Adjust the audio volume using the in-line volume wheel located on the headset cable. Rotate the wheel upwards to increase volume and downwards to decrease volume.
Microphone Mute
To mute your microphone, slide the mute switch on the in-line control unit. Slide it back to unmute the microphone.
Microphone Positioning
The microphone arm is flexible and can be adjusted to your preferred position for clear communication. When not in use, the microphone can be flipped up and out of the way.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset. Do not use harsh chemicals or abrasive materials.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or excessive pulling on the cable to prevent damage.
Troubleshooting
| Problem | Solution |
|---|---|
| No audio from headset. |
|
| Microphone not working. |
|
| Sound is distorted or unclear. |
|
Specifications
- Model: 051-032
- Connectivity: Wired (3.5mm Jack)
- Ear Placement: Over-Ear
- Audio Driver Size: 40 mm
- Special Features: Microphone Included, Noise Cancellation (Passive)
- Controls: In-line Volume Control, Microphone Mute
- Material: Fabric, Foam, Silicone
- Product Dimensions: 11.42 x 9.06 x 2.36 inches
- Item Weight: 5.3 ounces
- Compatible Devices: Gaming Consoles (specifically PlayStation 4)
Warranty and Support
For warranty information and technical support, please refer to the official PDP website or contact their customer service department. Keep your proof of purchase for warranty claims.
This product is covered by a limited manufacturer's warranty. Specific terms and conditions may apply.
