Introduction
This manual provides instructions for the safe and efficient operation of your Utilitech 15-Amp 3-Outlet Digital Residential Plug-in Countdown Lighting Timer, Model 149289. Please read all instructions carefully before use and retain this manual for future reference. This digital timer is designed to automate the control of lighting and other electrical appliances, offering multiple programming options for convenience and energy saving.
Figure 1: Utilitech 15-Amp 3-Outlet Digital Residential Plug-in Countdown Lighting Timer. This image shows the black digital timer with three grounded outlets, a digital display, and control buttons. A power cord with a three-prong plug is visible on the left.
Safety Information
- For outdoor use, ensure the timer is protected from direct exposure to water and extreme weather conditions.
- Do not exceed the electrical ratings: 125V, 15A, 1875 Watts (resistive/appliance), 60Hz.
- Always plug the timer into a grounded outlet.
- Do not immerse the timer in water.
- Keep children away from the timer and connected appliances.
- Unplug the timer from the outlet before cleaning.
Setup
- Initial Power-Up: Plug the timer into a standard 125V grounded outdoor outlet. The display will illuminate.
- Setting Current Time:
- Press the "SET" button. The hour digit will flash.
- Use the "UP" or "DOWN" buttons to adjust the hour. Pay attention to AM/PM indicators.
- Press "SET" again. The minute digit will flash.
- Use the "UP" or "DOWN" buttons to adjust the minutes.
- Press "SET" a third time to confirm the time.
- Setting Current Day:
- After setting the time, the day of the week will flash.
- Use the "UP" or "DOWN" buttons to select the current day (e.g., MO, TU, WE, TH, FR, SA, SU).
- Press "SET" to confirm the day.
- Connecting Appliances: Plug your lighting or appliance into one of the three grounded outlets on the timer. Ensure the total load does not exceed 15A/1875W.
Operating Instructions
Programming Modes
The timer offers several programming options. Use the "MODE" button to cycle through the available settings:
- Always On: The connected appliances will remain continuously powered.
- Dusk to Dawn: The timer will automatically turn on at dusk and turn off at dawn. This mode utilizes a built-in photocell sensor.
- On at Dusk for 1-12 Hours: The timer will turn on at dusk and remain on for a user-selected duration of 1 to 12 hours.
- To set the duration: While in this mode, press the "HOUR" button to cycle through 1-12 hours.
- Programmed On/Off Times: This mode allows you to set specific ON and OFF times for each day or groups of days.
- Press the "PROG" button to enter programming mode.
- The display will show "1 ON". Use "UP/DOWN" to set the desired ON time (hour and minute). Press "PROG" to confirm.
- The display will show "1 OFF". Use "UP/DOWN" to set the desired OFF time. Press "PROG" to confirm.
- Next, select the days for this program. Use "UP/DOWN" to cycle through options like "MO TU WE TH FR SA SU", "MO TU WE TH FR", "SA SU", "MO", "TU", etc. Press "PROG" to confirm.
- Repeat for additional ON/OFF programs (up to 12 programs can be set).
- Press "MODE" to exit programming and return to normal operation.
Manual Override
The "MANUAL" button allows you to temporarily override the current program without erasing it. Pressing "MANUAL" will cycle the output between ON and OFF states. The timer will revert to its programmed state at the next scheduled ON/OFF event.
Maintenance
- Cleaning: Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
- Storage: If storing the timer for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
- Battery Backup: The timer contains an internal battery to retain settings during power outages. This battery is not user-replaceable and should last for the life of the product.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer does not turn on/display is blank. | No power to the outlet; timer is faulty. | Check the power outlet with another device. Ensure the timer is securely plugged in. If still blank, the timer may be faulty. |
| Connected appliance does not turn on/off as programmed. | Incorrect program setting; appliance is faulty; manual override engaged; photocell obstruction (Dusk to Dawn mode). | Verify program settings (time, day, ON/OFF). Check if the appliance works when plugged directly into an outlet. Ensure the "MANUAL" button is not overriding the program. For Dusk to Dawn, ensure the photocell is not blocked and is exposed to ambient light. |
| Timer turns on/off at incorrect times. | Current time/day not set correctly; program settings are incorrect. | Re-set the current time and day. Review and correct all program settings. |
| Dusk to Dawn feature not working. | Photocell blocked or dirty; insufficient ambient light. | Ensure the photocell sensor is clean and unobstructed. Test in an area with clear exposure to natural light. |
Specifications
- Model: 149289
- Electrical Rating: 125V AC, 15A, 1875W (Resistive/Appliance), 60Hz
- Outlets: 3 Grounded Outlets
- Material: Plastic
- Dimensions: Approximately 22.86 x 16.51 x 2.54 cm
- Weight: Approximately 0.28 g (0.01 Ounces)
- Operating Modes: Always On, Dusk to Dawn, On at Dusk for 1-12 Hours, Programmable On/Off
- Internal Battery: For program retention during power outages (non-replaceable)
Warranty and Support
Warranty information and specific customer support details are not provided in the available product data. Please refer to the product packaging or the manufacturer's official website for warranty terms and contact information for technical support.
