1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Supermicro SuperServer 5028D-TN4T. This Mini-Tower server features an Intel Xeon D-1541 8-Core Processor, dual 10GbE, dual GbE, and a dedicated IPMI port, designed for various server applications including cloud and virtualization, general networking, high-performance NAS, and SMB critical server environments. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
2. Safety Information
Observe the following safety precautions to prevent injury and damage to the equipment:
- Always disconnect the power cord from the electrical outlet before cleaning or servicing.
- Do not expose the server to moisture or extreme temperatures.
- Ensure proper ventilation to prevent overheating. Do not block ventilation openings.
- Only use accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel.
- This product is designed for indoor use only.
3. Package Contents
Verify that all components are present in the package:
- Supermicro SuperServer 5028D-TN4T (Barebone)
- Server Components (e.g., power cord, documentation)
Note: System Memory, Storage Drive, and Operating System Software are not included and must be acquired separately to complete the system.
4. Product Overview
The Supermicro SuperServer 5028D-TN4T is a compact yet powerful Mini-Tower server. It features the Intel Xeon D-1541 8-Core Processor, providing a power-efficient platform suitable for various demanding applications. The server includes two 10 Gb Ethernet ports (10GBase-T), two Gigabit ports, and a dedicated IPMI port for remote management.
Key features include:
- Intel Xeon D-1541 8-Core Processor
- Dual 10GbE, Dual GbE, Dedicated IPMI Port
- 4 x 3.5" Hot-swap Drive Bays and 2 x 2.5" Drive Support (with optional carriers)
- Supports M.2 (SATA and PCIe)
- Supports 6 x SATA 6.0Gb/s; RAID 0, 1, 5
- Supports up to 128GB ECC/Non-ECC DDR4 memory
- 250W 80 PLUS Bronze Power Supply
Figure 1: Front view of the Supermicro SuperServer 5028D-TN4T Mini-Tower server, showing the locking front bezel and hot-swap drive bays.
5. Setup
- Unpacking: Carefully remove the server from its packaging. Retain all packaging materials for future transport.
- Component Installation:
- Memory: Install DDR4 ECC/Non-ECC memory modules into the available DIMM slots. Refer to the motherboard manual for specific slot population guidelines.
- Storage Drives: Install 3.5" SATA drives into the hot-swap bays. For 2.5" drives, optional drive carriers are required. Ensure drives are securely seated.
- M.2 Drives: If using M.2 storage, install it into the designated M.2 slot on the motherboard.
- Network Connections: Connect Ethernet cables to the desired network ports (10GbE, GbE, or IPMI).
- Power Connection: Connect the power cord to the server's power input and then to a grounded electrical outlet.
- Peripheral Connections: Connect any necessary peripherals such as a monitor (via VGA), keyboard, and mouse.
6. Operating Instructions
- Power On: Press the power button located on the front panel. The system will initiate the boot process.
- BIOS/UEFI Configuration: During startup, press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility for initial configuration, such as boot order or RAID settings.
- Operating System Installation: Install your preferred operating system (e.g., Windows Server, Linux, VMware ESXi) from a bootable USB drive or network source.
- IPMI Remote Management: Access the dedicated IPMI port via a web browser using its assigned IP address for remote monitoring and management functionalities. Refer to the IPMI user guide for detailed instructions.
- Power Off: To safely shut down the server, use the operating system's shutdown procedure. Alternatively, press and hold the power button for 4 seconds to force a shutdown (use only when necessary).
7. Maintenance
Regular maintenance ensures the longevity and stable operation of your server:
- Cleaning: Periodically clean the exterior of the server with a soft, dry cloth. Ensure ventilation openings are free from dust and obstructions. Do not use liquid cleaners directly on the server.
- Firmware Updates: Regularly check the Supermicro website for BIOS, IPMI, and driver updates. Apply updates as recommended to improve performance, stability, and security.
- Data Backup: Implement a regular data backup strategy to protect against data loss.
- Environmental Control: Operate the server in a clean, dry, and temperature-controlled environment to prevent component degradation.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Server does not power on. | No power, faulty power supply, loose connections. | Check power cord connection, verify power outlet, ensure internal power cables are secure. |
| No display output. | Monitor not connected, faulty VGA cable, incorrect display settings. | Ensure monitor is connected and powered on, try a different VGA cable, reset BIOS to default settings. |
| Operating system fails to boot. | Incorrect boot order, corrupted OS, faulty storage drive. | Check BIOS boot order, attempt OS repair, verify storage drive health. |
| Network connectivity issues. | Loose Ethernet cable, incorrect network configuration, faulty network port. | Verify cable connections, check network settings in OS, test with a different port or cable. |
For more complex issues, consult the Supermicro support website or contact technical support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Supermicro |
| Model Number | SYS-5028D-TN4T |
| CPU Model | Intel Xeon D-1541 (8-Core) |
| CPU Speed | 2 GHz |
| Memory Storage Capacity | Supports up to 128 GB DDR4 |
| RAM Memory Technology | DDR4 |
| Memory Speed | 2133 MHz |
| Memory Slots Available | 4 |
| Hard Disk Interface | Serial ATA (6 x SATA 6.0Gb/s) |
| Drive Bays | 4 x 3.5" Hot-swap, 2 x 2.5" Drive Support, M.2 (SATA and PCIe) |
| Graphics Coprocessor | BMC integrated ASPEED AST2400 |
| Video Output Interface | VGA |
| Network Interfaces | Dual 10GbE, Dual GbE, Dedicated IPMI Port |
| Power Supply | 250W 80 PLUS Bronze |
| Item Dimensions (LxWxH) | 10.98 x 8.27 x 9.45 inches |
| Item Weight | 6.8 Kilograms (15 lbs) |
| Color | Black |
| Specific Uses For Product | IT Infrastructure, Data Management, Computing-Intensive Tasks |
10. Warranty and Support
Supermicro products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Supermicro website. Technical support, drivers, and additional documentation can also be found on the Supermicro support portal. Please have your product model number (5028D-TN4T) and serial number ready when contacting support.
Supermicro Official Website: www.supermicro.com
