HEWLETT PACKARD 726724-B21

Download PDF
Contents

HPE 64GB DDR4 2400 Smart Memory Module

Model: 726724-B21

1. Introduction

This manual provides essential instructions for the proper installation, operation, and maintenance of your HPE 64GB DDR4 2400 Smart Memory Module (Model 726724-B21). This memory module is designed to enhance server performance, reliability, and efficiency, providing the necessary capacity and bandwidth for demanding workloads in HPE ProLiant Gen9 servers, Apollo Family, Synergy, and Blade Systems.

2. Safety Information

Always observe the following safety precautions when handling and installing memory modules:

  • Electrostatic Discharge (ESD) Prevention: Memory modules are sensitive to static electricity. Always wear an anti-static wrist strap connected to a grounded surface or frequently touch a grounded metal object before handling the module.
  • Power Off: Ensure the server is completely powered off and disconnected from all power sources before opening the chassis or installing any components.
  • Handle with Care: Hold the memory module by its edges, avoiding contact with the gold connectors or the integrated circuits.
  • Ventilation: Ensure adequate ventilation within the server chassis to prevent overheating.

3. Setup and Installation

Follow these steps to properly install the HPE 64GB DDR4 2400 Smart Memory Module into your compatible server system.

  1. Prepare the Server:
    • Power down the server completely.
    • Disconnect all power cords and external cables.
    • Open the server chassis according to the server's specific documentation.
  2. ESD Protection: Put on an anti-static wrist strap and connect it to a grounded metal surface on the server chassis.
  3. Locate Memory Slots: Identify the appropriate DIMM slots for installation. Refer to your server's documentation for the correct slot population order and configuration guidelines.
  4. Install the Memory Module:
    • Gently open the ejector clips at both ends of the DIMM slot.
    • Align the memory module with the slot, ensuring the notch on the module matches the key in the DIMM slot.
    • Apply even pressure to both ends of the module until it seats firmly into the slot and the ejector clips snap into place. Do not force the module.
HPE 64GB DDR4 2400 Smart Memory Module (726724-B21)

An image showing the HPE 64GB DDR4 2400 Smart Memory Module, highlighting its physical form factor and integrated circuits. This module is ready for installation into a compatible server DIMM slot.

  1. Close and Power On:
    • Close the server chassis.
    • Reconnect all power cords and external cables.
    • Power on the server.
  2. Verify Installation: Check the server's BIOS/UEFI settings or operating system to confirm that the new memory module is recognized and the total memory capacity is updated correctly.

4. Operating the Memory Module

Once installed, the HPE 64GB DDR4 2400 Smart Memory Module operates automatically as part of your server's system. It contributes to:

  • Reduced Transaction Response Time: The increased throughput of HPE DDR4 Smart Memory helps accelerate data processing.
  • Improved Application Performance: Enables better leveraging of applications by providing ample memory resources.
  • Enhanced User Support: Allows servers to support more end-users and handle larger workloads efficiently.
  • Power Efficiency: HPE DDR4 2400 Smart Memory reduces power consumption by 5% compared to DDR4 2133 modules.

5. Maintenance

Memory modules generally require minimal maintenance. To ensure optimal performance and longevity:

  • Server Environment: Maintain a clean, dust-free environment for your server.
  • Airflow: Ensure proper airflow within the server chassis to prevent heat buildup, which can degrade component performance over time.
  • Physical Handling: If you need to remove or re-install the module, always follow the safety and installation procedures outlined in this manual.

6. Troubleshooting

If you encounter issues after installing the memory module, consider the following troubleshooting steps:

  • Server Not Booting or Memory Errors:
    • Verify that the memory module is fully seated in its slot. Gently press down on both ends until the ejector clips click into place.
    • Ensure the module is installed in the correct DIMM slot according to your server's documentation. Incorrect slot population can prevent the server from booting.
    • If multiple modules are installed, try booting with one module at a time to identify a potentially faulty module.
    • Check for compatibility. Ensure the memory module is compatible with your specific server model and processor.
  • Incorrect Memory Capacity Reported:
    • Verify that the module is correctly seated.
    • Check the server's BIOS/UEFI settings to ensure memory detection is functioning correctly.
    • Consult your server's documentation for maximum supported memory capacity and configuration rules.

If issues persist, contact HPE support or your server vendor for further assistance.

7. Specifications

Key technical specifications for the HPE 64GB DDR4 2400 Smart Memory Module (726724-B21):

FeatureSpecification
BrandHEWLETT PACKARD (HPE)
SeriesSmart Memory
Model Number726724-B21
RAM Capacity64 GB
Computer Memory TypeDDR4 SDRAM
Memory Speed2400 MHz (also listed as 2133 MHz in some specifications, 2400 MHz is the higher performance rating)
Voltage1.2 Volts
Compatible DevicesServer
Item Weight1.92 ounces
Product Dimensions (LxWxH)8.1 x 4.1 x 0.1 inches

8. Warranty and Support

For information regarding the warranty of your HPE 64GB DDR4 2400 Smart Memory Module, please refer to the documentation provided with your server system or contact your point of purchase. HPE Smart Memory undergoes rigorous qualification and testing processes to ensure compatibility and reliability with HPE servers.

For technical support and further assistance, please visit the official Hewlett Packard Enterprise (HPE) support website or contact their customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.