1. Introduction
This manual provides instructions for the operation and maintenance of your Proscan PCR1989BT 1.8" Jumbo Digit Clock Radio. This device features a large green LED display, AM/FM radio, Bluetooth connectivity, and dual alarm functions. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
2. Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
3. Product Features
- 1.8-inch Jumbo Digit Green LED Display
- AM/FM Radio with Digital Tuner
- Bluetooth Connectivity for Wireless Audio Streaming
- Dual Alarm Functionality
- Gradual Wake and Sleep Timer Functions
- Auxiliary Input (3.5mm) for External Audio Devices
- Built-in Antenna for Radio Reception
- Battery Back-Up (requires 2 x AAA batteries, not included)
- Adjustable Display Brightness
4. Package Contents
- Proscan PCR1989BT Clock Radio Unit
- AC Power Adapter
- Owner's Manual
5. Controls and Display Overview

Figure 1: Front view of the Proscan PCR1989BT Clock Radio. The large green LED display shows the current time. Buttons for various functions are located on the top panel.
The Proscan PCR1989BT features a clear 1.8-inch jumbo digit display for easy readability. Control buttons are typically located on the top panel of the unit for convenient access. While specific button labels are not provided, common functions include:
- TIME SET: To adjust the current time.
- ALARM 1/2 SET: To set and activate Alarm 1 and Alarm 2.
- SNOOZE/SLEEP/DIMMER: For temporary alarm pause, setting sleep timer, and adjusting display brightness.
- MODE/FUNCTION: To switch between AM/FM radio, Bluetooth, and AUX input modes.
- TUNING/VOLUME +/-: To adjust radio frequency or audio volume.
- PRESET/PAIR: To save/recall radio stations or initiate Bluetooth pairing.
6. Setup
6.1 Power Connection
- Unpack the clock radio and place it on a stable, flat surface.
- Connect the AC power adapter to the DC input jack on the back of the unit.
- Plug the AC power adapter into a standard wall outlet (AC 120V, 60Hz). The display will light up.
6.2 Battery Back-Up Installation
The clock radio requires 2 x AAA batteries (not included) for battery back-up. This feature ensures that your time and alarm settings are retained during a power outage.
- Locate the battery compartment on the bottom or back of the unit.
- Open the battery compartment cover.
- Insert 2 x AAA batteries, observing the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Note: The battery back-up only maintains time and alarm settings; it does not power the display or alarm functions during a power outage.
7. Operating Instructions
7.1 Setting the Time
- Press and hold the TIME SET button until the hour digits begin to flash.
- Use the HOUR +/- or TUNING +/- buttons to adjust the hour. Pay attention to the AM/PM indicator.
- Press the TIME SET button again. The minute digits will flash.
- Use the MINUTE +/- or TUNING +/- buttons to adjust the minutes.
- Press the TIME SET button one more time to confirm and exit time setting mode.
7.2 Setting Alarms (Alarm 1 & Alarm 2)
The unit features two independent alarms. The setting process is similar for both.
- Press and hold the ALARM 1 SET (or ALARM 2 SET) button until the alarm hour digits flash.
- Use the HOUR +/- or TUNING +/- buttons to set the desired alarm hour (observe AM/PM).
- Press the ALARM 1 SET (or ALARM 2 SET) button again. The alarm minute digits will flash.
- Use the MINUTE +/- or TUNING +/- buttons to set the desired alarm minutes.
- Press the ALARM 1 SET (or ALARM 2 SET) button again to select the alarm source (Buzzer or Radio). Use TUNING +/- to choose.
- Press the ALARM 1 SET (or ALARM 2 SET) button one more time to confirm and activate the alarm. An alarm indicator (e.g., AL1 or AL2) will appear on the display.
To disable an alarm: Repeatedly press the corresponding ALARM SET button until the alarm indicator disappears from the display.
Gradual Wake: The alarm volume will start low and gradually increase to a comfortable level.
7.3 Snooze Function
When the alarm sounds, press the SNOOZE button (often combined with Sleep/Dimmer). The alarm will pause for approximately 9 minutes and then sound again. This can be repeated multiple times.
7.4 AM/FM Radio Operation
- Press the MODE button repeatedly until "FM" or "AM" appears on the display.
- Manual Tuning: Press the TUNING +/- buttons briefly to adjust the frequency step by step.
- Auto Scan: Press and hold the TUNING +/- buttons for a few seconds. The radio will automatically scan and stop at the next strong station.
- Volume Adjustment: Use the VOLUME +/- buttons to adjust the listening volume.
For best FM reception: Extend the built-in wire antenna fully. For AM reception, rotate the unit for optimal signal.
7.5 Bluetooth Pairing
- Press the MODE button repeatedly until "BT" or "Bluetooth" appears on the display. The unit will enter pairing mode, and a Bluetooth indicator will flash.
- Enable Bluetooth on your mobile device (smartphone, tablet, etc.) and search for available devices.
- Select "PCR1989BT" (or similar name) from the list of found devices.
- Once paired, the Bluetooth indicator on the clock radio will stop flashing and remain solid. You can now stream audio wirelessly from your device.
- Control playback (play/pause, skip tracks) and volume from your connected device or using the unit's controls if available.
7.6 Auxiliary Input (AUX)
- Connect one end of a 3.5mm audio cable (not included) to the AUX IN jack on the back of the clock radio.
- Connect the other end of the cable to the headphone jack or audio output of your external audio device (e.g., MP3 player, CD player).
- Press the MODE button repeatedly until "AUX" appears on the display.
- Start playback on your external device. Adjust the volume using the clock radio's VOLUME +/- buttons and/or your external device's volume control.
7.7 Sleep Timer
The sleep timer allows you to fall asleep to music, and the unit will automatically turn off after a set period.
- While listening to the radio or AUX/Bluetooth audio, press the SLEEP button (often combined with Snooze/Dimmer).
- Each press will cycle through available sleep times (e.g., 90, 60, 30, 15 minutes, OFF).
- Select your desired sleep duration. The unit will play for that period and then automatically turn off.
7.8 Display Dimmer
To adjust the brightness of the LED display, press the DIMMER button (often combined with Snooze/Sleep). Each press will cycle through different brightness levels (e.g., High, Medium, Low, Off).
8. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, waxes, or solvents.
- Battery Replacement: Replace the AAA backup batteries annually or if the time settings are not retained during a power interruption.
- Placement: Avoid placing the unit in direct sunlight, near heat sources, or in areas with high humidity or dust.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Power cord not securely connected. No power from outlet. | Ensure the AC adapter is firmly plugged into the unit and a working wall outlet. Test the outlet with another device. |
| Display is blank during power outage. | Battery backup only retains settings, does not power display. | This is normal operation. The display will return when power is restored. Ensure backup batteries are installed to save settings. |
| Alarm does not sound or is too quiet. | Alarm not activated. Volume too low (for radio alarm). Incorrect alarm time. | Verify the alarm indicator is visible on the display. Check alarm time. Increase volume if using radio alarm. |
| Poor radio reception. | Antenna not extended (FM). Unit position (AM). Interference. | Fully extend the FM wire antenna. Rotate the unit for better AM reception. Move away from other electronic devices that may cause interference. |
| Bluetooth device cannot pair. | Unit not in pairing mode. Device too far. Bluetooth off on device. | Ensure the clock radio is in Bluetooth pairing mode (BT flashing). Keep devices within 30 feet. Enable Bluetooth on your device. |
| No sound from AUX input. | Incorrect mode. Cable not connected. Volume too low. | Ensure the unit is in AUX mode. Check both ends of the 3.5mm audio cable. Increase volume on both the clock radio and the external device. |
| Time drifts or is incorrect after power loss. | Backup batteries are dead or not installed. | Install new AAA batteries in the backup compartment. |
10. Specifications
| Model: | PCR1989BT |
| Display: | 1.8-inch Jumbo Digit Green LED |
| Radio Bands: | AM/FM Digital Tuner |
| Connectivity: | Bluetooth, AUX Input (3.5mm) |
| Power Source: | AC 120V, 60Hz (Corded) |
| Battery Backup: | 2 x AAA batteries (not included) |
| Product Dimensions: | 10"W x 4"H |
| Item Weight: | 1.1 pounds |
| Material: | Acrylonitrile Butadiene Styrene |
| Manufacturer: | Curtis International LTD |
11. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: Curtis International LTD