1. Introduction
Thank you for choosing the Auraglow LED Teeth Whitening Kit. This manual provides essential information for the safe and effective use of your new teeth whitening system. Please read all instructions carefully before first use and retain this manual for future reference.
Image 1.1: Auraglow LED Teeth Whitening Kit packaging, showing the LED light, gel syringes, and storage case.
2. Safety Information
Please observe the following safety guidelines:
- Always follow the instructions provided in this manual.
- If you experience any sensitivity or irritation, discontinue use immediately.
- Keep the product out of reach of children.
- Do not ingest the whitening gel.
- Consult a dentist before use if you have sensitive teeth, existing dental restorations, or any oral health concerns.
3. Package Contents
The Auraglow LED Teeth Whitening Kit includes the following components:
- 1 x LED Accelerator Light with built-in tray
- 2 x Syringes of 35% Carbamide Peroxide Whitening Gel (10ml total, approximately 20 treatments)
- 1 x Storage Case
- 1 x USB Charging Cable
Image 3.1: Visual representation of the kit's contents, including the storage case, powerful LED light, charging cable, and two whitening gel syringes.
4. Setup and Charging
Before your first whitening session, ensure the LED light is fully charged.
- Connect the provided USB charging cable to the LED light and a compatible USB power source (e.g., wall adapter, computer USB port).
- Allow the device to charge until the indicator light shows a full charge. The storage case also functions as a charging dock.
5. Operating Instructions
Follow these steps for an effective teeth whitening treatment:
- Prepare Your Teeth: Brush and dry your teeth thoroughly before each session. This helps ensure optimal contact between the gel and your tooth surface.
- Apply Whitening Gel: Take one syringe of 35% Carbamide Peroxide gel. Apply a thin, even line of gel along the front inner surface of both the top and bottom sections of the LED light's mouth tray. Avoid overfilling to prevent gel from contacting gums excessively.
- Insert Tray: Carefully place the mouth tray into your mouth, ensuring your teeth are comfortably seated against the gel-coated surfaces.
- Activate LED Light: Tap the Auraglow logo button on the LED light to turn it on. The light will illuminate, initiating the whitening process.
- Whitening Session: Wear the device for 30 minutes. The LED light is designed to activate the whitening gel for faster results.
- Completion: After 30 minutes, the device will automatically turn off. Remove the mouth tray from your mouth.
- Rinse: Rinse your mouth thoroughly with water to remove any remaining gel. Also, rinse the mouth tray with water and allow it to air dry.
Image 5.1: Close-up of the 35% Carbamide Peroxide whitening gel syringes, the active ingredient in the kit.
For best results, use the kit daily for 7-10 days or until desired whitening is achieved. Individual results may vary.
6. Ingredients
The primary active ingredient in the whitening gel is:
- Carbamide Peroxide (35%)
The gel is proudly made in the USA for safety and efficacy.
7. Maintenance
Proper care ensures the longevity and hygiene of your whitening kit:
- Cleaning the Mouth Tray: After each use, rinse the mouth tray thoroughly with cool water. Do not use hot water as it may deform the tray. Allow it to air dry completely before storing.
- Storing the Gel: Store the whitening gel syringes in a cool, dry place, away from direct sunlight.
- Storing the LED Light: Once dry, place the LED light back into its storage case. The case protects the device and facilitates charging.
8. Troubleshooting
If you encounter any issues, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED light does not turn on. | Battery is low or depleted. | Ensure the LED light is fully charged using the provided USB cable. |
| LED light turns off unexpectedly during use. | Accidental tap on the power button; low battery. | Ensure the device is fully charged. Avoid touching the power button during the session. Re-tap to restart if needed. |
| Experiencing tooth sensitivity. | Overuse of gel; individual sensitivity. | Reduce the amount of gel used. Shorten treatment time. Discontinue use if sensitivity persists and consult a dentist. |
| Gel leakage from the tray. | Too much gel applied. | Apply a thinner line of gel to the tray. |
9. Specifications
- Model Number: B00YI5VJW6
- Brand: AURAGLOW
- Active Ingredients: 35% Carbamide Peroxide
- Product Dimensions: 6.57 x 5.67 x 1.65 inches
- Item Weight: 5.2 ounces
- Batteries: 1 Lithium Polymer battery (required, included)
- Waterproof Rating: IPX6 (for the LED light/tray)
10. Warranty and Support
For warranty information or technical support, please contact Auraglow customer service directly. Refer to the product packaging or the official Auraglow website for contact details.
Manufacturer: Auraglow
Official Website: Visit the AURAGLOW Store on Amazon
11. Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.