Introduction
This manual provides essential information for the safe and effective use of your Denali Pure replacement refrigerator water filter. Please read these instructions thoroughly before installation and retain for future reference. This filter is designed to provide clean, filtered water for your refrigerator, reducing chlorine, taste, and odor.

Image: Denali Pure replacement water filter packaging.
Safety Information
- Always turn off the water supply to the refrigerator before beginning installation.
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
- Ensure proper sealing to prevent leaks.
- Replace filter every 6 months or 300 gallons, whichever comes first, to maintain optimal performance and prevent bacterial growth.
Setup and Installation
Before You Begin: Locate your refrigerator's water filter compartment. Refer to your refrigerator's owner's manual for specific instructions on accessing the filter.
- Turn off Water Supply: Locate the water shut-off valve for your refrigerator and turn it off. This prevents water leakage during filter replacement.
- Remove Old Filter: Depending on your refrigerator model, twist the old filter counter-clockwise or press a release button to remove it. Some residual water may drip out; have a towel ready.
- Prepare New Filter: Remove the new Denali Pure filter from its packaging. Remove any protective caps or covers.
- Install New Filter: Insert the new filter into the filter housing. Twist clockwise until it locks into place. Ensure a snug fit. Do not overtighten.
- Turn on Water Supply: Slowly turn the water shut-off valve back on.
- Flush the System: Dispense approximately 2-3 gallons of water through the refrigerator's water dispenser. This flushes air from the system and removes any loose carbon particles. The water may appear cloudy initially; this is normal.
- Check for Leaks: Inspect the filter area for any signs of water leakage.
- Reset Filter Indicator: Refer to your refrigerator's owner's manual for instructions on how to reset the 'Change Filter' indicator light, if applicable.

Image: Visual representation of filter features including easy installation and certification.
Operating Instructions
Once installed and flushed, the filter operates automatically, providing filtered water and ice. The first few glasses of water may contain air bubbles or carbon particles. This is normal and will clear after flushing.
Maintenance
Filter Replacement Schedule: Replace your Denali Pure water filter every 6 months or after filtering 300 gallons of water, whichever comes first. Regular replacement ensures optimal water quality and flow.
Cleaning: No specific cleaning is required for the filter itself. Keep the filter compartment clean and dry.
Troubleshooting
- Slow Water Flow:
- Ensure the filter is installed correctly and fully seated.
- Check if the water supply valve is fully open.
- The filter may be clogged and requires replacement if it's past its recommended lifespan.
- Water Leaks:
- Ensure the filter is properly twisted and sealed. Remove and re-install if necessary.
- Check the O-rings on the filter for damage.
- Confirm the water supply line connections are secure.
- Cloudy Water / Black Particles:
- This is common immediately after installation due to air and loose carbon. Continue flushing the system for 2-3 gallons. If it persists, re-install the filter and flush again.
- Filter Indicator Light Remains On:
- Refer to your refrigerator's owner's manual for specific instructions on resetting the filter indicator light. This is typically a button press sequence.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Replacement Refrigerator Water Filter |
| Brand | Denali Pure |
| Model Compatibility | Compatible with Maytag UKF8001, MCD2257HES, and other Maytag models. |
| Filtration Capacity | 300 gallons (approximate) |
| Recommended Replacement | Every 6 months |
| Certifications | ANSI, NSF (Standard 42 for chlorine, taste, and odor reduction) |
| Unit Count | 2 filters per pack |
Compatible Refrigerator Models:
- Maytag MCD2257HES
- Maytag MCD2257KES
- Maytag MFC2061KES
- Maytag MFD2561HEB
- Maytag MFD2561HES
- Maytag MFD2561KES
- Maytag MFI2067AES
- Maytag MFI2067AEW
- Maytag MFI2266AEB
- Maytag MFI2266AEU
- Maytag MFI2266AEW
- Maytag MFI2269DRM00
- Maytag MFI2269VEM
- Maytag MFI2269VEM3
- Maytag MFI2269VEW
- Maytag MFI2568AEB
- Maytag MFI2568AEQ
- Maytag MFI2568AES
- Maytag MFI2568AEW
- Maytag MFI2569VEW1
- Maytag MFI2569YEM0
- Maytag MFI2665XEM6
- Maytag MFI2665XEW2
- Maytag MFX2570AEM
- Maytag MFX2571XEM
- Maytag MSD2351HEB
- Maytag MSD2351HEQ
- Maytag MSD2352KEB
- Maytag MSD2355HEW
- Maytag MSD2641KEB
- Maytag MSD2650KEU
- Maytag MSD2651HES
- Maytag MSD2651KES
- Maytag MSD2651KEU
- Maytag MSD2651KGB
- Maytag MSD2652KEB
- Maytag MSD2652KGW
- Maytag MSD2655HEQ
- Maytag MSD2656KES
- Maytag MSD2657HEW
- Maytag MSD265MHES
- Maytag MZD2665HEB
- Maytag MZD2665HEQ
- Maytag MZD2665HES
- Maytag MZD2665HEW
- Maytag MZD2666KES
- Maytag MZD2666KEW
- Maytag PSD262LHEB
- Maytag PSD262LHEZ
- Maytag PSD265LGES

Image: Three Denali Pure replacement water filters.
Warranty Information
This Denali Pure replacement filter is covered by a warranty offered solely by Denali Pure. It is not covered under any warranties offered by the original equipment manufacturers (OEMs) of your refrigerator. For specific warranty details and claims, please refer to the Denali Pure website or contact customer support.
Support and Contact Information
For further assistance, troubleshooting, or warranty inquiries, please contact Denali Pure customer support. Refer to the product packaging or the official Denali Pure website for the most current contact details.