Introduction
The UGREEN 3.5mm to 1/4 Audio Cable is designed for connecting devices with a 3.5mm (1/8 inch) jack to audio equipment featuring a 6.35mm (1/4 inch) jack. This cable facilitates high-fidelity audio transmission between various devices such as smartphones, laptops, guitars, amplifiers, and mixing consoles.
Key features include:
- Astonishing Sound Quality: Equipped with 24K gold-plated, corrosion-resistant connectors and double shielding for optimal signal transmission, delivering clear, crisp, noise-free, and high-fidelity audio. Note: For stereo audio output, the playback device must support stereo processing.
- Upgraded Durability: Features a zinc alloy case and double-layer nylon braid to protect against wear and tear, ensuring longevity.
- Lossless Audio Transfer: A pure copper core maximizes conductivity and durability, enabling high-purity audio signal transfer with minimal loss.
- Wide Compatibility: Connects devices with a 3.5mm jack (e.g., phones, iPods, laptops) to equipment with a 6.35mm jack (e.g., guitars, mixing consoles, home theater systems, amplifiers).
Image: UGREEN 3.5mm to 1/4 Audio Cable, showcasing its design and connectors.
Setup Instructions
Follow these steps to correctly set up your UGREEN 3.5mm to 1/4 Audio Cable:
- Identify Connectors: The cable has two different sized male connectors: a 3.5mm (1/8 inch) TRS connector and a 6.35mm (1/4 inch) TRS connector. Ensure you identify the correct port on your devices.
- Connect 3.5mm End: Insert the smaller 3.5mm connector into the audio output jack of your source device (e.g., smartphone, tablet, laptop, MP3 player). This is typically labeled as "Headphone Out" or "AUX Out".
- Connect 6.35mm End: Insert the larger 6.35mm connector into the audio input jack of your receiving device (e.g., guitar amplifier, mixing console, digital piano, speaker). This is often labeled as "Input", "Line In", or "Instrument In".
- Secure Connection: Ensure both connectors are fully inserted into their respective ports to establish a stable and secure connection.
Image: Diagram illustrating universal compatibility, showing 3.5mm connection to PC, Phone, Tablet, MP3, and 6.35mm connection to Speaker, Amplifier, Guitar, Mixer.
Image: Visual guide distinguishing between 1/4" (6.35mm) Mono Single (TS), 1/4" (6.35mm) Dual Channel (TRS), and 1/8" (3.5mm) Dual Channel (TRS) connectors. This cable supports TRS for stereo audio.
Operating Instructions
Once the cable is connected, operate your devices as follows:
- Power On Devices: Ensure both the source device and the receiving audio equipment are powered on.
- Select Input: On your receiving audio equipment (e.g., amplifier, mixer), select the correct input channel corresponding to where the 6.35mm cable is connected.
- Adjust Volume: Start with a low volume level on both devices and gradually increase it to a comfortable listening level.
- Stereo Output: This cable is designed for stereo audio. For optimal stereo sound, ensure your playback device supports stereo processing. If connecting to a mixer, use a stereo input/output port instead of a mono port.
- Guitar Connection: When connecting an electric guitar, note that electric guitars typically output a mono signal. To achieve a stereo setup, an additional amplifier or stereo processing unit may be required.
Image: A man and woman enjoying music, demonstrating the cable connecting a smartphone to an amplifier for premium audio experience.
Image: A man playing a guitar connected to a laptop via the UGREEN audio cable, illustrating its use for tuning and recording.
Maintenance
To ensure the longevity and optimal performance of your UGREEN audio cable, follow these maintenance guidelines:
- Storage: Store the cable in a clean, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable at sharp angles to prevent internal damage.
- Cleaning: Use a soft, dry cloth to wipe the cable and connectors. Avoid using harsh chemicals or abrasive materials, which can damage the gold plating or cable jacket.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself. This prevents strain on the connection points.
- Inspection: Periodically inspect the cable for any signs of wear, such as fraying, cuts, or bent connectors. Replace the cable if significant damage is observed to prevent potential audio issues or further damage to connected equipment.
Image: Close-up view of the durable braided cord, highlighting its robust construction designed for long life.
Troubleshooting
If you encounter issues with your UGREEN audio cable, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound |
|
|
| Poor Sound Quality (Static, Buzzing, Low Volume) |
|
|
| Intermittent Audio |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Number | 10625 |
| Connector Type | 3.5mm (1/8 inch) TRS Male to 6.35mm (1/4 inch) TRS Male |
| Cable Type | AUX Audio Cable |
| Connector Material | 24K Gold-plated, Zinc Alloy Case |
| Conductor Material | Pure Copper Core |
| Shielding | Double Shielded |
| Jacket Material | Double Layer Nylon Braid |
| Compatible Devices | Amplifiers, Mixers, Computers, Laptops, Smartphones, Headphones, Sound Boards, Guitars, Basses, Speakers, Yamaha/Casio/Roland Keyboards, Digital Pianos, Home Theater Systems, Recorders. |
| Connectivity Technology | Wired |
| Color | Black |
| Item Weight | 0.06 kg (for 3.3FT variant) |
| Specification Met | RoHS |
Image: Cross-section view of the cable, illustrating its multi-shielding, pure copper core, pure copper braid, and aluminum foil layers for superior sound quality.
Image: Close-up of the 24K gold-plated connector with zinc alloy case, designed for better signal transmission and durability.
Warranty and Support
UGREEN products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship.
- Warranty Period: Please refer to the product packaging or the official UGREEN website for specific warranty duration applicable to your region.
- Claim Process: In the event of a defect, please contact UGREEN customer support with your proof of purchase. Do not attempt to repair the product yourself, as this may void the warranty.
- Customer Support: For technical assistance, warranty claims, or general inquiries, please visit the official UGREEN website or contact their customer service department. Contact details can typically be found on the product packaging or the UGREEN brand store on Amazon.
For more information, visit the UGREEN Official Store.
