1. Introduction
The SYMA X5SW Explorers2 is a 2.4G 4-channel RC quadcopter equipped with a 6-axis gyroscope for stable flight and a 0.3MP WiFi camera for First Person View (FPV) capabilities. This manual provides essential information for the safe and effective operation of your quadcopter.
Figure 1: SYMA X5SW Explorers2 Quadcopter. This image shows the black quadcopter with its propellers, landing gear, and camera module.
Key features include:
- 0.3MP Camera for photo and video capture.
- WiFi FPV functionality, compatible with iOS and Android devices.
- Integrated 6-axis gyro for enhanced stability and wind resistance.
- 360° 3D eversion (flip) function.
- Headless mode for simplified control.
- 4-channel control for versatile flight movements: up/down, left/right sideward flight, forward/backward, turn left/right.
- Colorful flashing lights for visibility during day and night flights.
2. Package Contents
Please verify that all items listed below are present in your package:
- 1 x SYMA X5SW Quadcopter
- 1 x 2.4G Transmitter (Remote Control)
- 1 x 3.7V 500mAh Li-poly Battery
- 1 x 0.3MP WiFi Camera
- 4 x Landing Gear
- 2 x Spare Blades
- 1 x USB Charger
- 1 x Protecting Frame (Blade Protectors)
- 4 x Screws
- 1 x Screwdriver
- 1 x Smart Phone Clipper
- 1 x User Manual (this document)
3. Setup
3.1 Installing Landing Gear and Blade Protectors
- Attach the four landing gear pieces to the bottom of the quadcopter body. Secure them with the provided screws using the screwdriver.
- Install the protecting frame (blade protectors) around the propellers. This helps prevent damage during minor crashes.
3.2 Battery Charging and Installation
- Quadcopter Battery: Connect the 3.7V 500mAh Li-poly battery to the USB charger. Plug the USB charger into a compatible USB power source. The charging time is approximately 120 minutes. Once charged, carefully insert the battery into the quadcopter's battery compartment and connect it.
- Transmitter Battery: The 2.4G transmitter requires 4 AA batteries (not included). Open the battery compartment on the back of the transmitter and insert the batteries, observing correct polarity.
3.3 Camera and FPV Setup
- Attach the 0.3MP WiFi camera to the designated slot on the bottom of the quadcopter. Ensure it is securely connected.
- Mount your smartphone onto the Smart Phone Clipper and attach the clipper to the transmitter.
- Download the official SYMA FPV application from your device's app store (compatible with iOS and Android).
- Power on the quadcopter and then your smartphone's Wi-Fi. Connect to the Wi-Fi network broadcast by the quadcopter (usually named 'SYMA-FPV-XXXX').
- Open the SYMA FPV app to view the live video feed and control camera functions.
4. Operating Instructions
4.1 Transmitter Overview
The SYMA X5SW transmitter operates in MODE2, meaning the left stick controls throttle (up/down) and yaw (rotate left/right), while the right stick controls pitch (forward/backward) and roll (sideward left/right).
Figure 2: SYMA X5SW Remote Control. This image displays the 2.4G transmitter with its two joysticks, power switch, and various control buttons.
4.2 Pairing and Calibration
- Place the quadcopter on a flat, level surface.
- Turn on the quadcopter's power switch. The indicator lights will flash.
- Turn on the transmitter. Move the left throttle stick all the way up, then all the way down. You will hear a beep, and the quadcopter lights will become solid, indicating successful pairing.
- To calibrate the gyroscope, pull both control sticks to the bottom-right corner simultaneously for a few seconds until the lights flash rapidly and then become solid again. This ensures stable flight.
4.3 Basic Flight Controls
- Take-off: Gently push the left throttle stick upwards.
- Landing: Gently pull the left throttle stick downwards.
- Ascend/Descend: Push the left throttle stick up to ascend, pull down to descend.
- Forward/Backward: Push the right stick up for forward flight, pull down for backward flight.
- Turn Left/Right (Yaw): Push the left stick left to rotate left, push right to rotate right.
- Sideward Flight (Roll): Push the right stick left for left sideward flight, push right for right sideward flight.
4.4 Special Functions
- 360° 3D Eversion (Flip): Press the 3D eversion button (refer to transmitter diagram) and then push the right stick in any direction to perform a flip. Ensure sufficient altitude before attempting.
- Headless Mode: Press the headless mode button. In this mode, the quadcopter's orientation relative to the pilot is maintained, regardless of which way the front of the drone is facing. This simplifies control for beginners.
- Throwing Flight: With the quadcopter powered on and paired, gently toss it into the air and immediately apply throttle. The 6-axis gyro will stabilize it.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the quadcopter and transmitter. Avoid water or solvents.
- Blade Inspection: Regularly check propellers for damage (cracks, bends). Replace damaged blades immediately using the spare blades provided.
- Blade Protectors: Ensure blade protectors are securely attached to minimize damage during impacts.
- Battery Care: Do not overcharge or over-discharge the Li-poly battery. Store batteries in a cool, dry place when not in use. Remove batteries from the transmitter if not used for extended periods.
- Storage: Store the quadcopter and its components in a safe, dry environment away from direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Quadcopter does not respond to transmitter. | Not paired; low battery in quadcopter or transmitter. | Ensure proper pairing sequence. Charge quadcopter battery. Replace transmitter batteries. |
| Unstable flight / Drifting. | Gyroscope not calibrated; damaged propeller; strong wind. | Perform gyroscope calibration on a flat surface. Inspect and replace damaged propellers. Avoid flying in windy conditions. |
| Short flight time. | Battery not fully charged; aging battery. | Ensure battery is fully charged (approx. 120 minutes). Consider purchasing a new battery if performance degrades significantly. |
| FPV video feed is poor or non-existent. | WiFi connection issue; camera not properly connected. | Verify smartphone is connected to the quadcopter's WiFi network. Ensure camera is securely attached. Restart quadcopter and app. |
| Quadcopter crashes easily. | Lack of experience; environmental factors. | Practice in open, calm areas. Review flight controls. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | X5SW Explorers2 |
| Brand | SYMA |
| Channels | 4CH |
| Gyroscope | 6-Axis |
| Camera | 0.3MP WiFi FPV |
| Controller Frequency | 2.4G |
| Controller Mode | MODE2 (Left Throttle) |
| Remote Distance | Approximately 50 Meters |
| Quadcopter Battery | 3.7V 500mAh Li-poly |
| Charging Time | Approximately 120 Minutes (USB charging) |
| Controller Battery | 4 x AA batteries (not included) |
| Product Dimensions | 12.4 x 12.4 x 4.1 inches (315 x 315 x 105 mm) |
| Item Weight | 500 Grams (1.1 pounds) |
| Supported Phone Type | iOS and Android |
| Skill Level | Beginner |
8. Safety Guidelines
Adhering to these safety guidelines is crucial for preventing accidents and ensuring the longevity of your quadcopter:
- Supervision: Always operate the quadcopter under adult supervision, especially for younger users.
- Environment: Fly in open, unobstructed areas away from people, animals, buildings, and power lines. Avoid flying indoors unless sufficient space is available.
- Weather Conditions: Do not fly in strong winds, rain, or other adverse weather conditions. Wind can easily carry the lightweight quadcopter away.
- Line of Sight: Always maintain visual line of sight with the quadcopter during flight.
- Propellers: Keep fingers, hair, and loose clothing away from rotating propellers.
- Battery Safety: Use only the specified charger and battery. Do not puncture, disassemble, or expose batteries to extreme heat. Discontinue use if batteries show signs of damage or swelling.
- Respect Privacy: Be mindful of privacy when using the camera function.
- Local Regulations: Be aware of and comply with all local laws and regulations regarding drone operation.
9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact SYMA customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.