STANLEY 19-1500

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

STANLEY 19-1500 Reusable Blue Cloth Filter Instruction Manual

For 5-6 Gallon Wet/Dry Vacuums

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your STANLEY 19-1500 Reusable Blue Cloth Filter. This filter is designed for use with 5-6 gallon STANLEY wet/dry vacuums to effectively manage debris and maintain air quality during various cleaning tasks.

STANLEY 19-1500 Reusable Blue Cloth Filter with Clamp Ring

Image: The STANLEY 19-1500 Reusable Blue Cloth Filter with its clamp ring, ready for installation.

Compatible Models

The STANLEY 19-1500 reusable blue cloth filter is compatible with the following 5-6 Gallon STANLEY wet/dry vacuum models:

SL18143
SL18115
SL18115P
SL18116
SL18116P
SL18117
SL18191P
SL18199P
SL18701P-10A
SL18410P-5A

STANLEY 19-1500 filter installed in a wet/dry vacuum, listing compatible models

Image: The STANLEY 19-1500 filter shown installed in a vacuum, with a list of compatible models.

Setup and Installation

Follow these steps to properly install the reusable cloth filter into your STANLEY wet/dry vacuum:

Ensure the vacuum is unplugged and the canister is empty.
Remove the motor head from the vacuum canister.
If a foam filter or cartridge filter is present, remove it from the filter cage.
Position the blue cloth filter over the filter cage.
Secure the filter by placing the clamp ring over the filter and twisting it into place until it is firmly seated. No tools are required for this step.
Reattach the motor head to the vacuum canister.

Step-by-step installation guide for the STANLEY 19-1500 filter

Image: Visual guide demonstrating the steps to install the filter onto the vacuum's filter cage.

Operating Instructions

The STANLEY 19-1500 reusable blue cloth filter is designed for efficient dust control during both wet and dry vacuuming operations. It helps to capture fine dust and debris, contributing to cleaner air output and reducing particulate matter in your workspace.

When performing dry vacuuming, ensure the filter is clean and dry for optimal performance. For wet vacuuming, the filter can remain installed, as its design allows for both applications.

Person using a STANLEY wet/dry vacuum with the 19-1500 filter for efficient dust control

Image: A person operating a STANLEY wet/dry vacuum, illustrating the filter's role in efficient dust control.

Multiple scenarios for using a STANLEY wet/dry vacuum with the 19-1500 filter, including home, outdoor, and factory settings

Image: Depiction of various environments where the STANLEY wet/dry vacuum and filter can be used, such as home, outdoor, and factory settings.

Maintenance

The STANLEY 19-1500 filter is designed for durability and reusability. Regular cleaning will extend its lifespan and maintain optimal vacuum performance.

Cleaning Instructions:

Remove the filter from the vacuum as described in the "Setup and Installation" section.
Rinse the blue cloth filter thoroughly under running water to remove accumulated dust and debris.
Gently squeeze out excess water.
Allow the filter to air dry completely before reinstallation. Ensure it is fully dry to prevent mold or mildew growth and to maintain filtration efficiency.

Note: Do not use harsh chemicals or abrasive brushes, as these can damage the filter material.

STANLEY 19-1500 reusable filter being washed under running water

Image: The STANLEY 19-1500 reusable filter being cleaned by rinsing under water, demonstrating its washable nature.

Troubleshooting

Problem	Possible Cause	Solution
Filter does not fit correctly.	Incorrect model size or incompatible vacuum.	Verify your vacuum model number against the "Compatible Models" list. Ensure the filter is correctly aligned with the filter cage before securing the clamp ring.
Reduced suction or poor filtration.	Clogged or dirty filter.	Clean the filter according to the "Maintenance" instructions. Ensure it is completely dry before reinstallation.
Clamp ring is damaged or broken.	Physical damage during installation or use.	Inspect the clamp ring for cracks or breaks. A damaged clamp ring may prevent proper sealing. Contact customer support for replacement parts if necessary.

Specifications

Model Number: 19-1500
Material: Non-woven fabric
Compatibility: Designed for 5-6 Gallon STANLEY Wet/Dry Vacuums (e.g., SL18143, SL18115, SL18115P, SL18116, SL18116P, SL18117, SL18191P, SL18199P, SL18701P-10A, SL18410P-5A)
Filter Dimensions: Approximately 9.84 x 9.84 inches (25 x 25 cm)
Clamp Ring Size: Approximately 6.9 x 6.1 inches (17.5 x 15.5 cm)
Reusability: Reusable and washable
Item Weight: 1.1 ounces (approximately 31 grams)
Product Dimensions (overall): 0.5 x 7.87 x 13.58 inches (approximately 1.27 x 19.99 x 34.49 cm)

Diagram showing the dimensions of the STANLEY 19-1500 filter and clamp ring

Image: A diagram illustrating the key dimensions of the STANLEY 19-1500 filter and its clamp ring.

Warranty and Support

Warranty information for the STANLEY 19-1500 Reusable Blue Cloth Filter is not provided in the available product data. For specific warranty details or to inquire about replacement parts and technical support, please refer to the official STANLEY website or contact STANLEY customer service directly.

STANLEY is committed to providing quality products and support. For assistance, please visit the official STANLEY support channels.

Additional Information

No official product videos from the seller were found in the provided data.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.