Scotts Turf Builder Weed and Feed 3 Instruction Manual

1. Product Overview

Scotts Turf Builder Weed & Feed3 is a granular product designed to eliminate over 50 listed lawn weeds, including dandelions and clover, while simultaneously fertilizing your lawn to promote thicker, healthier grass. This product utilizes WeedGrip Technology to ensure effective weed control.

Image 1: Scotts Turf Builder Weed & Feed3 product bag, showing the brand logo, product name, and key benefits like 'Clears Out Dandelions & Clover' and 'Thickens Lawn'.

Key Features:

• Weed Control: Targets and eliminates over 50 common lawn weeds, including dandelions and clover.
• Fertilization: Feeds the lawn to promote thicker, greener growth, which helps to naturally crowd out future weeds.
• WeedGrip Technology: Designed to grip onto weed leaves for effective absorption and results.
• Coverage: One 14.29 lb. bag covers up to 5,000 sq. ft.

2. Safety Information

Always read and follow all label directions and precautions before using this product. Keep out of reach of children and pets. Avoid contact with skin and eyes. Do not use on unintended surfaces or plants.

Application Restrictions:

• Do not apply to St. Augustinegrass (including Floratam), Dichondra, Lippia, Carpetgrass, and Bentgrass.
• Do not allow people or pets to enter the treated area until dusts have settled.
• Do not apply if rain is expected within 24 hours.
• Do not water your lawn for 24 hours after application.
• Do not apply if daytime temperatures are consistently below 60°F or above 90°F.
• Do not apply more than twice per year.
• Allow a minimum of 30 days between applications.

3. Setup and Preparation

Proper preparation ensures optimal results and safety during application.

Required Equipment:

• Scotts spreader (broadcast/rotary or drop spreader recommended).
• Protective gloves and eyewear.

Lawn Preparation:

1. Mow Grass: Mow tall grass a day or two before application.
2. Wet Lawn: Ensure your grass is wet from dew or watering before application. This helps the granules stick to weed leaves for best results.
3. Check Weather: Apply when weeds are actively growing and daytime temperatures are consistently between 60°F and 90°F. Avoid application if rain is expected within 24 hours.

Image 2: Scotts Quick Start Guide illustrating the three simple steps for application: Fill & Set the spreader, Apply to the lawn, and Clean-up.

4. Operating Instructions (Application)

Follow these steps for effective application of Scotts Turf Builder Weed & Feed3.

Spreader Settings:

Use a Scotts spreader for application. Refer to the product bag for specific spreader settings. For Scotts broadcast/rotary spreaders, set to 3 ½. For Scotts drop spreaders, set to 5. For additional spreader settings, call 1-800-543-8873.

Image 3: A person applying Scotts Turf Builder Weed & Feed3 to a lawn using a Scotts broadcast spreader, demonstrating the application process.

Application Steps:

1. Fill your Scotts spreader on a hard surface to avoid product waste on the lawn.
2. Set the spreader to the recommended setting for your specific Scotts spreader model.
3. Apply the product evenly across your wet lawn. Walk at a steady pace to ensure uniform coverage.
4. Sweep any stray product from hard surfaces (driveways, sidewalks) back onto the lawn to keep valuable feeding nutrients on the grass.

5. Maintenance

Proper post-application care is essential for maximizing results and maintaining a healthy lawn.

Post-Application Care:

• Do Not Water: Do not water your lawn for 24 hours after application. This allows the granules to adhere to weed leaves and begin working.
• Keep Off Lawn: Do not allow people or pets to enter the treated area until the dusts have settled.
• Regular Feeding: Regular feedings provide the nutrients your lawn needs to look its best and withstand the stresses of weeds, heat, drought, and family activity.
• Mow and Leave Clippings: Mowing high allows the grass to develop a deep root system. Leaving grass clippings on your lawn helps recycle plant nutrients back into the soil.
• Conserve Water: Well-fed lawns are more efficient at using available water. Feeding with Scotts Turf Builder Weed & Feed3 helps create a thick lawn with more roots to better absorb water and nutrients.

Image 4: A close-up of a green lawn with dew, emphasizing the importance of not watering for 24 hours after applying the product.

6. Troubleshooting

If you encounter issues, consider the following:

• Weeds Not Dying: Ensure the product was applied to a wet lawn and that temperatures were within the recommended range (60°F-90°F). Full control may take at least one month.
• Grass Damage: Verify that your grass type is not listed under the application restrictions (e.g., St. Augustinegrass). Over-application or application to dry grass in hot conditions can cause damage.
• Product Wash-off: If rain occurred within 24 hours of application, the product may have been washed off, reducing effectiveness.

For further assistance, please contact Scotts customer support.

7. Specifications

Image 5: Detailed list of active ingredients and their percentages in Scotts Turf Builder Weed & Feed3.

8. Warranty and Support

Scotts offers a satisfaction guarantee for their products. If you are not satisfied with the results, please contact Scotts directly for assistance.

Contact Information:

• Phone: 1-800-543-TURF (8873)
• Website: www.scotts.com