1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Feniex Industries T3 Surface Mount LED Light. The T3 is a compact, high-intensity LED perimeter light designed for emergency, warning, and tow vehicle applications. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Always disconnect power before installing or servicing the light.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Mount the light securely to prevent detachment during vehicle operation.
- Do not look directly into the light when it is active, as it can cause temporary vision impairment.
- Verify that the installation complies with all local, state, and federal regulations for emergency and warning lighting.
3. Product Overview
The Feniex T3 Surface Mount LED Light is engineered for durability and high visibility. It features a rugged aluminum housing and a UV-resistant polycarbonate lens, ensuring reliable performance in various environmental conditions.
3.1 Features
- Input Voltage: 12 Volts DC
- Current Draw: 0.750 Amps
- Cable Harness: 9 Inches
- 14 selectable flash patterns, including brake, tail, and steady-on functions.
- Rugged aluminum housing for enhanced durability.
- Integrated mounting bezel with a rubber protective pad.
- Weather-resistant design with an anti-yellowing lens.
- Syncs with other Feniex Fusion series lights (Fusion 1X & 2X, Fusion Mirror Mount, Fusion Spoiler Mount, Fusion 100 & 200, Cannon V2, Wide-Lux).
3.2 What's in the Box
- Light Module
- Bezel
- Mounting Pad
- Installation Screws
3.3 Product Visuals

The Feniex T3 light module, showcasing its compact design and clear lens.

This image illustrates the compact dimensions of the T3 light, making it suitable for various mounting locations.
4. Installation
Proper installation is crucial for the performance and longevity of your T3 light. Follow these steps carefully.
4.1 Wiring Diagram

The wiring diagram shows the connections for power, ground, and pattern selection.
| Color | Function | Connection |
|---|---|---|
| Red Wire | Battery / 12V (+) | Positive Battery Terminal |
| Blue Wire | Pattern / 12V (-) | Momentary Switch to Ground |
| Black Wire | Ground / 12V (-) | Chassis Ground |
4.2 Mounting
The T3 light features an integrated mounting bezel and a rubber protective pad for secure installation. Choose a flat, stable surface on your vehicle for mounting. Use the provided installation screws to firmly attach the light, ensuring the rubber pad creates a seal against the mounting surface for weather resistance.

This image demonstrates potential mounting locations for the T3 lights on a vehicle, highlighting their versatility.
5. Setup
The T3 light offers 14 flash patterns. To cycle through the patterns, momentarily apply a ground connection to the blue wire. Each momentary connection will advance to the next pattern. Hold the blue wire to ground for 3-5 seconds to reset to the first pattern.
6. Operating Instructions
Once installed and configured, the T3 light operates by applying 12V DC power to the red wire and grounding the black wire. The selected flash pattern will activate. To change the pattern, use the momentary switch connected to the blue wire as described in the Setup section.
6.1 Official Product Videos
Video 1: The Feniex 3 Series - Compact and Reliable. This video provides an overview of the Feniex 3 Series, which includes the T3 Surface Mount light, highlighting its compact design and reliability.
Video 2: Feniex Industries - T3 Surface Mount. This video specifically showcases the Feniex T3 Surface Mount light in action, demonstrating its brightness and various flash patterns.
Video 3: T3 Surface Mount. A short video demonstrating the T3 Surface Mount light's performance and visibility.
7. Maintenance
The Feniex T3 light is designed for minimal maintenance. Regularly inspect the light for any physical damage, loose connections, or debris accumulation. Clean the lens with a soft cloth and mild soap and water. Avoid using abrasive cleaners or solvents, as they may damage the lens or housing.
8. Troubleshooting
8.1 Light Not Functioning
- Check all wiring connections for proper contact and insulation.
- Verify that the vehicle's power source is providing 12V DC.
- Inspect the fuse in the power circuit.
8.2 Incorrect Flash Pattern
- Ensure the momentary switch for pattern selection is functioning correctly.
- Cycle through the patterns again by momentarily grounding the blue wire.
- Hold the blue wire to ground for 3-5 seconds to reset the pattern to the default.
9. Specifications
| Specification | Value |
|---|---|
| Brand | Feniex Industries |
| Model Number | T3 |
| Manufacturer Part Number | D-50015-R |
| Color | Red |
| Input Voltage | 12 Volts DC |
| Current Draw | 0.75 Amps |
| Wattage | 4 watts |
| Cable Harness Length | 9 Inches |
| Product Dimensions (L x W x H) | 3.4 x 1 x 1.05 inches |
| Item Weight | 2.89 ounces |
| Lens Material | Polycarbonate |
| Special Features | Anti-Yellowing Lens, Waterproof, Weather Resistant |
| Automotive Fit Type | Universal Fit |
| UPC | 743724522402, 786362962575 |
10. Warranty and Support
Feniex Industries provides a 5-year warranty on this product from the manufacturing date. For technical support, warranty claims, or further assistance, please contact Feniex Industries directly through their official website or customer service channels.