iHome IBT29BX6 User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your iHome IBT29BX6 Alarm Clock Radio with Bluetooth Speaker and Color Changing Lamp. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your user experience.

What's in the Box

• iHome IBT29BX6 Bluetooth Color-changing Dual Alarm Clock Radio With Speakerphone
• Universal Voltage AC Adaptor
• Audio Cable (3.5mm)

Setup

Power Connection

Connect the provided universal voltage AC adaptor to the DC jack on the back of the unit and plug it into a working wall outlet. The unit will power on automatically.

Image: Rear view of the iHome IBT29BX6 showing the power jack and universal voltage adapter connection.

Battery Backup Installation (Optional)

For battery backup functionality (to preserve time and alarm settings during a power outage), install 1 CR2 battery (not included) into the battery compartment located on the bottom of the unit. Ensure correct polarity.

Setting the Time

1. Press and hold the Time Set button located on the top of the unit until the time display flashes.
2. Use the +/- buttons to adjust the hour. Press Time Set again to confirm.
3. Use the +/- buttons to adjust the minute. Press Time Set again to confirm.
4. The time is now set.

Operating Instructions

Bluetooth Pairing

The iBT29BX6 features Bluetooth connectivity for wireless audio streaming.

1. Press the Power button to turn on the unit.
2. Press the Bluetooth Pairing button (located on the back of the unit near the power jack) until the Bluetooth indicator on the display flashes.
3. On your Bluetooth-enabled device (e.g., smartphone, tablet), enable Bluetooth and select "iHome IBT29" from the list of available devices.
4. Once paired, the Bluetooth indicator will glow solid, and you can stream audio wirelessly.

Image: Front view of the iHome IBT29BX6 highlighting Bluetooth streaming capabilities and dimensions.

FM Radio Operation

Listen to your favorite FM radio stations.

1. Extend the FM antenna located on the back of the unit for optimal reception.
2. Press the Mode button to switch to FM Radio mode.
3. Use the Tune +/- buttons to manually tune to a station, or press and hold to auto-scan for the next available station.
4. To save a preset, press and hold the Presets button, then use +/- to select a preset number (1-6). Press Presets again to confirm.

Color Changing Lamp

The unit features a translucent cabinet that changes color.

1. Press the Color button on the top of the unit to cycle through different color modes: Blue, Green, Amber, Red, White, Sky Gradient, Slow Fade, Pulse to Music, and Lighting Off.
2. To adjust the brightness of the lamp, repeatedly press the Snooze/Display Dimmer button.

Image: Multiple iHome IBT29BX6 units displaying various color options, illustrating the color-changing feature.

Image: The iHome IBT29BX6 with a smartphone connected via USB cable for charging, demonstrating the USB charging port.

Dual Alarm Settings

Set two independent alarms with customizable wake-up sources.

1. Press and hold either Alarm 1 or Alarm 2 button until the alarm time flashes.
2. Use the +/- buttons to adjust the alarm hour, then press the respective Alarm button to confirm.
3. Repeat for minutes.
4. Use +/- to select the wake-up source (Bluetooth, FM Radio, or Tone). Press Alarm button to confirm.
5. Use +/- to select the alarm schedule (Every Day, Weekdays, Weekends). Press Alarm button to confirm.
6. Use +/- to adjust the alarm volume. Press Alarm button to confirm.
7. The alarm is now set. The corresponding alarm icon will appear on the display.
8. To turn off a sounding alarm, press the corresponding Alarm button. To snooze, press the Snooze button.

Speakerphone Functionality

When connected via Bluetooth, the unit can be used as a speakerphone.

• To answer an incoming call, press the Speakerphone button.
• To end a call, press the Speakerphone button again.
• To decline a call, press and hold the Speakerphone button.

Maintenance

Cleaning

Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

Battery Replacement

If the battery backup indicator appears or settings are lost during power outages, replace the CR2 battery in the compartment on the bottom of the unit.

Troubleshooting

Specifications

• Brand: iHome
• Model: IBT29
• Color: Color Changing
• Display Type: Digital
• Power Source: AC adapter
• Product Dimensions: 6.5"W x 6.5"H
• Item Weight: 1 Pounds
• Material: Acrylonitrile Butadiene Styrene
• Special Features: Adjustable Brightness, Alarm, Charging Port, Mood Light, Radio, Speakerphone
• Batteries: 1 CR2 batteries required (for backup)
• UPC: 047532908046

Warranty

This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official iHome website.

Support

For further assistance, technical support, or to purchase replacement parts, please visit the iHome support website or contact their customer service:

• Website: www.ihome.com
• Online Support: Refer to the website for FAQs and contact options.