DIRECTV RC73 IR/RF Remote Control User Manual

1. Introduction

This manual provides instructions for the DIRECTV RC73 IR/RF Remote Control. This remote is designed to operate various DIRECTV equipment and compatible televisions.

1.1. Compatibility

The Genie Remote (model RC73) is compatible with the following DIRECTV equipment in RF mode (Radio Frequency), which does not require pointing the remote directly at the device:

• Genie (model HR44 or above)
• Genie Lite (model H44 or above)
• Genie Mini (model C41 or above)
• 4K Genie Mini (model C61K or above)
• Wireless Genie Mini (model C41W or above)

The remote is also compatible with all DIRECTV receivers and DIRECTV Ready TVs in IR mode (Infrared), which requires pointing the remote directly at the equipment.

2. Setup and Programming

Follow these steps to set up and program your DIRECTV RC73 remote control with your television and DIRECTV receiver.

2.1. Inserting Batteries

The remote requires two AA batteries. To insert them:

1. Remove the battery cover on the back of the remote by sliding it downwards.
2. Insert two AA batteries, ensuring correct polarity (+ and -).
3. Replace the battery cover by sliding it back into position until it clicks.

2.2. Programming the Remote to Your TV

To control your television with the RC73 remote, follow these steps:

1. Turn on your television.
2. On the RC73 remote, press the MENU button.
3. Navigate to Settings using the arrow keys and press SELECT.
4. Select Remote Control and press SELECT.
5. Choose Pair/Program Remote.
6. Select your television brand (e.g., Samsung Television). The system will attempt to find a compatible code.
7. Once a code is received, test the volume by pressing the VOL+ button.
8. If the volume increases, select It Worked. If not, select Try Next Code and repeat the test.
9. Complete the setup by following any on-screen prompts.

For additional assistance, you can visit att.com/directvremote.

3. Operating the Remote Control

The RC73 remote features a user-friendly layout for controlling your DIRECTV experience. Below are the primary functions of its buttons:

3.1. Top Section Controls

• ON/OFF: Powers the connected device on or off.
• GUIDE: Displays the program guide.
• MENU: Accesses the main menu for settings and options.
• LIST: Shows your recorded programs.
• EXIT: Exits the current menu or screen.
• INFO: Displays information about the current program.
• Directional Arrows (Up, Down, Left, Right): Navigate through menus and program guides.
• SELECT: Confirms a selection.
• BACK: Returns to the previous screen or menu.
• R (Record): Initiates recording of the current program.

3.2. Middle Section Controls

• VOL (Volume Up/Down): Adjusts the television volume.
• CH (Channel Up/Down): Changes the channel.
• PREV (Previous Channel): Returns to the last viewed channel.
• Playback Controls (Rewind, Play/Pause, Fast Forward): Controls media playback.

3.3. Numeric Keypad

• 0-9: Enters channel numbers or other numerical inputs.
• ENTER (input): Confirms numerical input.

4. Maintenance

4.1. Battery Replacement

When the remote's performance degrades or it stops responding, it's time to replace the batteries. The remote uses two AA batteries.

1. Slide the battery cover off the back of the remote.
2. Remove the old batteries.
3. Insert two new AA batteries, ensuring they are oriented correctly according to the polarity indicators (+ and -).
4. Replace the battery cover.

5. Troubleshooting

If you encounter issues with your DIRECTV RC73 remote control, try the following troubleshooting steps:

• Remote Not Responding:
  • Ensure fresh batteries are installed correctly.
  • Check for any obstructions between the remote and the receiver/TV (for IR mode).
  • Verify the remote is in the correct mode (RF for Genie devices, IR for others).
• Programming Issues:
  • Re-attempt the programming steps carefully as outlined in Section 2.2.
  • If programming your TV, ensure you select the correct TV brand.
  • Some users report success by performing a factory reset on their DIRECTV receiver via the on-screen menu before attempting to program the remote.
• Buttons Not Working:
  • Clean the remote control, especially around the buttons, to remove any debris that might be causing sticking.
  • If only specific buttons are not working, the remote may need replacement.

6. Specifications

7. Warranty and Support

Specific warranty information for the DIRECTV RC73 remote control is not provided in the product details. For warranty claims or further technical support, please refer to your DIRECTV service provider's documentation or contact their customer service directly.