Husky Extreme Felen 3-4 Tent User Manual

Product Overview

The Husky Extreme Felen 3-4 is a robust geodesic tent designed for 3 to 4 people, suitable for all seasons. Its construction prioritizes durability and user convenience, featuring high-quality Duraluminium poles and a design that allows for quick setup even in adverse weather conditions.

Image: Front view of the Husky Extreme Felen 3-4 tent in red, showcasing its geodesic structure and dual entrances.

Key Features:

• Double-wall geodesic construction with external Duraluminium poles (Ø 8.5 mm) for superior stability.
• Outer tent made of 210T Ripstop polyester with 6000 mm/cm² water resistance.
• Inner tent made of breathable 190T nylon with mosquito net for comfort and ventilation.
• Floor made of 190T polyester with 10,000 mm/cm² water resistance for maximum dryness.
• Two entrances and one spacious vestibule for flexible access and storage.
• Includes Duraluminium tent pegs, a repair kit, a compression sack, and two large inner pockets.

Setup Instructions

Follow these steps for a quick and efficient tent setup. It is recommended to practice pitching the tent in a familiar environment before your first outdoor trip.

1. Unpack and Lay Out: Choose a flat, clear area. Unpack the tent, poles, and pegs from the compression sack. Lay out the outer tent flat on the ground.
2. Assemble Poles: Connect the Duraluminium pole sections. The Felen 3-4 features external pole sleeves, making it an outer-first pitch tent.
3. Insert Poles: Slide the assembled poles through the designated sleeves on the outer tent. Ensure they are fully inserted and seated correctly.
4. Secure Poles: Attach the pole ends to the grommets or clips at the base of the tent. This will raise the tent structure.
5. Peg Down Tent: Secure the corners of the outer tent to the ground using the Duraluminium tent pegs. Ensure the tent is taut.
6. Attach Inner Tent: The inner tent is designed to be attached to the inside of the outer tent. Clip the inner tent to the loops provided on the inside of the outer tent. This design allows for pitching the tent in rain without the inner tent getting wet.
7. Guy Lines: Extend and peg out all guy lines to provide maximum stability, especially in windy conditions. Adjust tensioners to keep lines taut.
8. Ventilation: Open the variable hinged ventilation openings as needed for airflow.

Image: Side view of the Husky Extreme Felen 3-4 tent, illustrating its stable geodesic shape and pole structure.

Image: Diagram showing the dimensions of the Husky Extreme Felen 3-4 tent, including height, length, and width, as well as sleeping area layout for 3 people.

Operating the Tent

The Felen 3-4 tent is designed for comfort and functionality in various outdoor conditions.

• Entrances: Utilize the two spacious entrances for convenient entry and exit, or to create additional ventilation.
• Vestibule: The single vestibule provides ample space for storing gear, cooking, or as a sheltered area during rain.
• Ventilation: The generous variable hinged ventilation openings on both front sides in the upper part can be operated from both inside and outside. Adjust them to manage airflow and minimize condensation.
• Inner Pockets: Use the two large pockets on the inner walls for organizing small personal items.
• All-Season Use: Thanks to its robust construction and high water column ratings, this tent is suitable for use in all four seasons.

Maintenance and Care

Proper maintenance will extend the lifespan of your Husky Felen 3-4 tent.

• Cleaning: Clean the tent with a soft sponge and lukewarm water. Do not use harsh detergents or washing machines, as this can damage the fabric's waterproof coating.
• Drying: Always ensure the tent is completely dry before packing it away. Packing a damp tent can lead to mildew and fabric degradation. Air dry in a shaded, well-ventilated area.
• Storage: Store the tent in a cool, dry place, away from direct sunlight and extreme temperatures. Loosely pack the tent rather than tightly compressing it for long-term storage to preserve fabric integrity.
• Pole Care: Inspect poles for any damage or bends after each use. Clean off any dirt.
• Zipper Care: Keep zippers clean and free of dirt. Lubricate with a silicone-based spray if they become stiff.
• Repair Kit: The included repair kit can be used for minor tears or pole damage. For significant damage, professional repair is recommended.

Troubleshooting

Here are solutions to common issues you might encounter:

• Condensation Inside Tent:

  Solution: Ensure proper ventilation by opening the vents and, if weather permits, partially opening the tent doors. Avoid cooking inside the tent without adequate ventilation. Choose a well-drained campsite.

• Tent Instability in Wind:

  Solution: Ensure all guy lines are fully extended and securely pegged. Adjust tensioners to keep lines taut. Orient the tent with its narrowest side facing the prevailing wind if possible. Check that all poles are correctly seated.

• Sticking Zippers:

  Solution: Clean any dirt or debris from the zipper teeth. Apply a zipper lubricant (e.g., silicone spray or zipper wax) to the teeth. Avoid forcing the zipper.

• Water Leaks:

  Solution: Check for small tears or punctures in the fabric. Use the repair kit for minor repairs. Ensure all seams are properly sealed; re-seal if necessary with a seam sealer product. Verify that the tent is pitched tautly to allow water to run off.

Technical Specifications

Warranty and Support

For specific warranty information, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. General return policy for this product is 30 days for refund/replacement.

For product support, inquiries, or to purchase replacement parts, please contact Husky customer service through their official website or authorized distributors.

Manufacturer: Husky

Model Number: Felen 3-4 Red