TATAY TL Electronic Water Timer User Manual

Introduction

The TATAY TL Electronic Water Timer is designed to automate your watering schedule, providing convenience and efficiency for your garden or lawn. Made from durable anti-UV resistant plastic, this timer connects directly to your tap and allows for flexible programming to meet your specific watering needs. It can regulate watering duration from 1 to 120 minutes and program up to 8 waterings per day with 15 weekly watering combinations.

Safety Information

• Ensure the timer is installed securely to prevent accidental detachment.
• Do not submerge the timer in water. It is designed for outdoor use but not for submersion.
• Use only the specified battery type (not included) and ensure correct polarity during installation.
• Protect the timer from extreme temperatures, both hot and cold, to ensure optimal performance and longevity.
• Keep out of reach of children.

Product Overview

Familiarize yourself with the components of your TATAY TL Electronic Water Timer.

Image: Front view of the TATAY TL Electronic Water Timer, showing the digital display, control buttons (Time, Min, Hour, Day, Man/Auto, Prog, Esc), and the TATAY logo. The timer is blue with a grey display panel and a grey protective cover at the bottom.

Image: The TATAY TL Electronic Water Timer with its grey protective cover closed, shielding the display and buttons from the elements. The main body of the timer is blue.

Key Components:

• Digital Display: Shows current time, programming settings, and battery status.
• Control Buttons: Used for setting time, programming watering schedules, and manual operation.
• Tap Connector: Upper threaded connector for direct attachment to a standard outdoor tap.
• Hose Connector: Lower threaded outlet for connecting a garden hose.
• Battery Compartment: Located on the side or back, for battery installation.
• Protective Cover: A grey cover that shields the display and buttons from weather elements.

Setup

1. Battery Installation

The timer requires batteries (not included) for operation. Ensure you use the correct type and install them with the correct polarity.

1. Locate the battery compartment, usually on the side or back of the unit.
2. Open the battery compartment cover.
3. Insert the required batteries, observing the polarity (+/-) markings inside the compartment.
4. Close the battery compartment cover securely to ensure water resistance.

2. Connecting to the Tap

The TATAY TL timer is designed for direct connection to a standard outdoor tap.

Image: A TATAY TL Electronic Water Timer shown in the process of being connected to an outdoor water tap. The top connector of the timer is being screwed onto the tap, and a hand is holding a hose connector below, ready to attach to the timer's outlet.

1. Ensure the tap is turned off before installation.
2. Screw the top connector of the water timer onto your outdoor tap. Hand-tighten only; do not overtighten.
3. Connect your garden hose to the lower outlet of the water timer. Ensure a secure, leak-free connection.
4. Once connected, slowly turn on the tap to allow water flow to the timer. Check for any leaks.

Image: The TATAY TL Electronic Water Timer fully installed on an outdoor tap, with a garden hose connected to its lower outlet. The timer is blue and grey, mounted against a light-colored wall, demonstrating a typical outdoor setup.

Operating Instructions

The TATAY TL timer offers both manual and automatic programming options.

Image: A close-up view of the TATAY TL Electronic Water Timer's digital display and control buttons. The display shows "10:48" and "28", with buttons labeled "time", "min", "hour", "day" at the bottom, and "Man/Auto", "Prog", "Esc" on the right, along with "ON", "AUTO", "OFF" indicators.

1. Setting Current Time and Day

1. Press the "time" button. The hour display will flash.
2. Use the "hour" button to adjust the hour.
3. Press the "min" button. The minute display will flash.
4. Use the "min" button to adjust the minutes.
5. Press the "day" button. The day of the week will flash.
6. Use the "day" button to select the current day (e.g., MO, TU, WE, TH, FR, SA, SU).
7. Press "Esc" to save and exit, or wait a few seconds for it to save automatically.

2. Programming Watering Schedules (Auto Mode)

The timer allows programming up to 8 daily waterings and 15 weekly watering combinations.

1. Press the "Prog" button to enter programming mode. The display will show "1" (for program 1).
2. Use the "hour" and "min" buttons to set the desired start time for watering program 1.
3. Press "Prog" again to set the duration for watering program 1. Use the "min" button to set the duration from 1 to 120 minutes.
4. Press "Prog" again to select the days of the week for watering program 1. Use the "day" button to cycle through options (e.g., every day, specific days, weekdays, weekends).
5. Repeat steps 2-4 for additional watering programs (up to 8). Press "Prog" to advance to the next program number.
6. After setting all desired programs, press "Esc" to save and exit programming mode.
7. Ensure the timer is set to "AUTO" mode for programmed watering to occur. Press "Man/Auto" to toggle between modes.

3. Manual Operation (ON/OFF)

You can manually turn the water on or off without affecting the programmed schedule.

• To turn water ON manually: Press the "Man/Auto" button until "ON" is displayed. The water will flow continuously until manually turned off or for a preset manual duration if available (refer to specific model features).
• To turn water OFF manually: Press the "Man/Auto" button until "OFF" is displayed.
• To return to AUTO mode: Press the "Man/Auto" button until "AUTO" is displayed. The timer will resume its programmed schedule.

Maintenance

• Cleaning: Wipe the exterior of the timer with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment remains dry.
• Battery Replacement: When the battery indicator shows low power, replace the batteries promptly to avoid interruption of watering schedules. Follow the battery installation steps in the Setup section.
• Winter Storage: Before the first frost, disconnect the timer from the tap and hose. Remove the batteries. Store the timer indoors in a dry, frost-free location to prevent damage from freezing water.
• Filter Cleaning: Periodically check the filter washer located at the tap connection point for debris. Clean it if necessary to ensure proper water flow and prevent blockages.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact TATAY customer service directly. Keep your proof of purchase for warranty claims.

For further assistance, you may visit the official TATAY website or contact their support channels.