Introduction
This manual provides essential information for the safe and effective use of your Makita WST06 Compact Folding Miter Saw Stand. Please read and understand all instructions before assembly, operation, or maintenance. Keep this manual for future reference.
The Makita WST06 Compact Folding Miter Saw Stand is designed to provide a stable and portable platform for miter saws, enhancing mobility and efficiency on the job site. Its lightweight aluminum construction and extendable material supports make it suitable for a variety of cutting tasks.
Safety Information
WARNING: Always follow general power tool safety guidelines and specific miter saw safety instructions when using this stand. Failure to do so can result in serious injury.
- Ensure the stand is placed on a firm, level surface before mounting any saw or beginning work.
- Verify all locking mechanisms are securely engaged before operation.
- Do not exceed the maximum supported weight of 500 lbs (227 kg).
- Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, and gloves.
- Keep the work area clear of obstructions and ensure adequate lighting.
- Do not attempt to move the stand with a miter saw attached unless specifically designed for such transport and all safety precautions are observed.
Components Overview
Familiarize yourself with the main components of the WST06 Miter Saw Stand:
- Main Frame (Aluminum Tubular Design)
- Folding Legs with Locking Mechanisms
- Miter Saw Mounting Brackets (Tool-less adjustable)
- Material Support Extensions
- Adjustable Material Stop
- Aluminum Feed Roller
- Transport Wheels
- Side Handle for Transport
Setup
1. Unfolding the Stand
- Place the folded stand on a flat surface.
- Locate the leg release buttons/detents.
- Press the release and extend each leg until it locks securely into the open position. Ensure all four legs are fully extended and locked.
Figure 1: The Makita WST06 Miter Saw Stand in its fully assembled and unfolded position, ready for use.
2. Attaching the Miter Saw
- Position the miter saw mounting brackets onto the stand's main frame.
- Use the "tool-less" adjustable levers to secure the brackets firmly to the stand.
- Carefully lift your miter saw and align its base with the mounting brackets.
- Secure the miter saw to the brackets using the provided fasteners or integrated clamping mechanisms. Ensure the saw is stable and does not wobble.
Figure 2: The WST06 stand with a miter saw securely mounted, demonstrating its use for cutting lumber.
3. Adjusting Material Supports
- Pull out the material support extensions to the desired length. They can extend up to 100-1/2 inches.
- Tighten the locking knobs on the extensions to hold them in place.
- Adjust the height of the material supports to be level with your miter saw's cutting surface.
- For repetitive cuts, position the adjustable material stop at the required measurement.
Figure 3: The miter saw stand with its material support extensions fully extended, providing ample support for long workpieces.
Operation
Using the Stand for Cutting
Once your miter saw is securely mounted and the material supports are adjusted, you can begin cutting. The stand provides a stable base, reducing vibration and improving cutting accuracy. The aluminum feed roller assists in smoothly feeding longer materials across the cutting surface.
Transport and Storage
The WST06 stand is designed for easy transport and compact storage.
- Folding for Transport: To fold the stand, first remove the miter saw. Then, press the leg release buttons and fold the legs inward. The stand folds to a compact 45-1/4 inches (115 cm) length.
- Wheeled Transport: Utilize the large solid rubber wheels and side handle to easily move the folded stand around the job site. While the stand is lightweight at 33.7 lbs (15.3 kg), it is recommended to transport it without the miter saw attached for optimal stability and safety.
Figure 4: The miter saw stand folded into a compact form for easy storage or transport.
Figure 5: A person demonstrating the portability of the WST06 stand, utilizing its integrated wheels and handle for easy movement.
Maintenance
Regular maintenance ensures the longevity and safe operation of your miter saw stand.
- Cleaning: After each use, wipe down the stand to remove sawdust and debris. Use a damp cloth if necessary, but avoid harsh chemicals.
- Lubrication: Periodically apply a light lubricant to the sliding parts of the material support extensions and the feed roller to ensure smooth operation.
- Fasteners: Regularly check all bolts, screws, and locking mechanisms for tightness. Tighten any loose fasteners to prevent instability.
- Inspection: Inspect the stand for any signs of damage, bending, or wear. Do not use the stand if any components are damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Legs not fully locked; uneven surface; loose fasteners. | Ensure all legs are locked. Adjust the adjustable foot for uneven surfaces. Tighten all fasteners. |
| Material support extensions do not slide smoothly. | Accumulation of sawdust/debris; lack of lubrication. | Clean the sliding surfaces. Apply a light lubricant. |
| Miter saw not securely attached. | Mounting brackets not tightened; incorrect saw placement. | Ensure "tool-less" levers are fully engaged. Verify saw is correctly seated on brackets. |
Specifications
| Model Number | WST06 (DEAWST06) |
| Dimensions (LxWxH, unfolded) | 45.28"L x 29.53"W x 33.46"H (115cm x 75cm x 85cm) |
| Folded Dimensions (LxWxH) | 45-1/4" x 10-3/4" x 9-3/4" (115cm x 27cm x 25cm) |
| Item Weight | 33.7 lbs (15.3 kg) |
| Material Support Extension | Up to 100-1/2 inches (255 cm) |
| Maximum Supported Weight | 500 lbs (227 kg) |
| Material | Aluminum |
Warranty
Makita products are manufactured under strict quality control and inspection standards. This product is covered by Makita's standard warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Makita website.
Support
For further assistance, technical support, or to locate an authorized service center, please visit the official Makita website or contact Makita customer service.