1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Acoustic Research Premier Series Portable Wireless Bluetooth Speakers, model AWSEE2BK2PKU. These speakers are designed to deliver wireless audio from compatible Bluetooth devices.
Image: Two Acoustic Research Premier Series Portable Wireless Bluetooth Speakers, black in color, with a lantern-like design and a handle on top. The AR logo is visible at the bottom of each speaker grille.
2. Safety Information
Please read and understand all safety instructions before using this product. Retain this manual for future reference.
- Do not expose the speakers to water or excessive moisture. This product is not waterproof.
- Do not place near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/accessories specified by the manufacturer.
- Clean only with a dry cloth.
- Do not block any ventilation openings.
- Dispose of batteries properly according to local regulations.
3. Package Contents
Verify that all items are present in your package:
- 2 Acoustic Research Portable Wireless Bluetooth Speakers
- Power Adapters (quantity not specified, assume one per speaker or one for both)
- Instruction Manual (this document)
4. Setup
4.1 Powering the Speakers
Your speakers can be powered by either AC power or batteries.
- AC Power: Connect the provided power adapter to the speaker's power input port and then to a standard electrical outlet.
- Battery Power: Open the battery compartment (typically located at the bottom or rear of the speaker) and insert the required number of AA batteries (not included), ensuring correct polarity. Close the compartment securely.
4.2 Initial Bluetooth Pairing
To connect your speakers to a Bluetooth-enabled device:
- Ensure both speakers are powered on.
- Activate Bluetooth on your source device (e.g., smartphone, tablet, computer).
- On one of the speakers, press and hold the Bluetooth pairing button (refer to speaker controls for exact button location, usually indicated by a Bluetooth symbol) until the indicator light begins to flash, signifying pairing mode.
- On your source device, search for available Bluetooth devices. Select "AR Speaker" or a similar name from the list.
- Once connected, the indicator light on the speaker will become solid, and you may hear an audible confirmation.
4.3 Stereo Pairing (Two Speakers)
These speakers support stereo pairing for an enhanced audio experience:
- Ensure both speakers are powered on and not currently connected to any Bluetooth device.
- Press the "Stereo Pair" button (or similar, consult speaker markings) on both speakers simultaneously. The speakers will attempt to connect to each other.
- Once successfully paired in stereo, one speaker will act as the left channel and the other as the right channel. An indicator light or audible cue will confirm the stereo connection.
- Proceed with initial Bluetooth pairing (Section 4.2) with your source device. The device will connect to the primary speaker, which then relays the stereo signal to the secondary speaker.
5. Operating the Speakers
5.1 Basic Controls
- Power Button: Press to turn the speaker on or off.
- Volume Buttons (+/-): Press to increase or decrease the volume.
- Bluetooth Button: Used for pairing (see Section 4.2).
5.2 Bluetooth Connectivity Range
The effective Bluetooth range for these speakers is approximately 15 meters (49 feet) in an open environment. Obstacles such as walls, furniture, or even people can significantly reduce this range. For optimal performance, maintain a clear line of sight between the source device and the speakers, and keep the distance under 20 feet (6 meters) when possible.
6. Maintenance
Proper care ensures the longevity of your speakers:
- Cleaning: Use a soft, dry cloth to clean the exterior surfaces. Do not use liquid cleaners or aerosols.
- Storage: When not in use for extended periods, store the speakers in a cool, dry place. Remove batteries if storing for more than a few weeks to prevent leakage.
- Battery Replacement: Replace all batteries simultaneously with new ones of the same type.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Batteries are dead or incorrectly inserted; AC adapter not connected. | Replace batteries, check polarity; ensure AC adapter is securely connected to speaker and outlet. |
| Cannot pair via Bluetooth | Speaker not in pairing mode; device Bluetooth off; too far from speaker; interference. | Ensure speaker is in pairing mode (flashing light); turn Bluetooth on your device; move device closer; restart both devices. |
| Sound cuts out or is choppy | Out of Bluetooth range; interference; low battery. | Move source device closer to speakers (within 20 feet/6 meters); remove obstacles; ensure speakers are fully charged or on AC power. |
| Only one speaker playing in stereo mode | Speakers not properly stereo paired. | Ensure both speakers are disconnected from Bluetooth, then re-initiate stereo pairing process (Section 4.3). |
8. Specifications
| Model Name: | AWSEE2BK2PKU |
| Speaker Type: | Portable |
| Connectivity Technology: | Bluetooth |
| Wireless Communication Technology: | Bluetooth |
| Bluetooth Range: | 15 Meters (approx. 49 feet) |
| Power Source: | Battery Powered (AA), AC Adapter |
| Audio Output Mode: | Stereo |
| Surround Sound Channel Configuration: | 2.0 |
| Control Method: | Touch |
| Color: | Black |
| Material: | Plastic |
| Product Dimensions: | 8 x 15 x 8 inches (per speaker) |
| Item Weight: | 10.93 pounds (total for 2 speakers) |
| Water Resistance Level: | Not Water Resistant |
| UPC: | 044476123481 |
9. Warranty and Support
These Acoustic Research Premier Series Portable Wireless Bluetooth Speakers come with a Limited Warranty. Please refer to the warranty card included in your original packaging for specific terms and conditions.
For technical support or customer service inquiries, please visit the Acoustic Research official website or contact their customer support line. Contact information is typically available on the product packaging or the manufacturer's website.
