Hurom HU-100SB Masticating Slow Juicer Machine User Manual

Important Safety Instructions

Please read all instructions carefully before using the appliance to ensure safe operation and to prevent damage.

• Always ensure the juicer is unplugged from the power outlet before assembling, disassembling, or cleaning.
• Do not immerse the motor base in water or any other liquid. Wipe with a damp cloth only.
• Keep hands and utensils out of the feeder chute during operation to prevent injury. Always use the provided pusher.
• Ensure all parts are correctly and securely assembled before operating the juicer.
• Do not operate the appliance if the power cord or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any manner.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not use accessories or attachments not recommended by the manufacturer.
• Avoid contact with moving parts.

Product Overview and Components

Familiarize yourself with the parts of your Hurom HU-100SB juicer before assembly and operation.

Image: The Hurom HU-100SB Masticating Slow Juicer Machine, showcasing its sleek silver design and assembled state.

Image: All components of the Hurom HU-100SB juicer laid out, including the motor base, juice bowl, auger, strainers, containers, cleaning brush, and additional accessories like the tofu press and veggie gloves.

Component List:

• Motor Base: The main body containing the motor.
• Juice Bowl: Collects juice and pulp during operation.
• Spinning Brush: Rotates to clean the strainer during juicing.
• Fine Strainer: For smooth juice extraction.
• Coarse Strainer: For softer fruits or making smoothies (bonus accessory).
• Auger (Squeezing Screw): Presses and crushes ingredients.
• Hopper: Top part where ingredients are fed.
• Pusher: Used to guide ingredients into the chute.
• Juice Cap: Controls juice flow from the spout.
• Juice Container: Collects extracted juice.
• Pulp Container: Collects expelled pulp.
• Cleaning Brush: For thorough cleaning of parts.
• Tofu Press: Additional accessory for making tofu.
• Veggie Scrubbing Gloves: For preparing produce.

Assembly Instructions

Follow these steps to correctly assemble your Hurom juicer before use.

1. Place the Juice Bowl: Position the juice bowl onto the motor base, aligning the red dots on the bowl and base. Turn the bowl clockwise until it locks into place.
2. Insert the Spinning Brush: Place the spinning brush into the juice bowl.
3. Insert the Strainer: Choose either the fine strainer (for clear juice) or the coarse strainer (for more pulp or softer fruits) and place it inside the spinning brush, ensuring it sits firmly.
4. Insert the Auger: Place the auger into the center of the strainer, pushing down and rotating slightly until it drops into place.
5. Attach the Hopper: Place the hopper onto the juice bowl, aligning the red dots. Turn the hopper clockwise until it locks securely.
6. Position Containers: Place the juice container under the juice spout and the pulp container under the pulp outlet.

Operating Your Juicer

Before Juicing:

• Wash all fruits and vegetables thoroughly.
• Cut ingredients into pieces that fit easily into the feeder chute. Remove hard seeds, pits, or thick skins (e.g., pineapple, citrus).

Juicing Process:

1. Ensure the juice cap is closed if you wish to mix juices or prevent drips.
2. Plug in the juicer and turn the power switch to the 'ON' position.
3. Slowly feed prepared ingredients into the feeder chute. The auger will automatically pull them down.
4. If ingredients get stuck, use the pusher to gently guide them. Do not force ingredients.
5. Once juicing is complete, open the juice cap to dispense the juice into the juice container.
6. For mixed beverages, close the juice cap, allow ingredients to mix in the juice bowl, then open the cap to dispense.

Tips for Best Results:

• For optimal extraction, alternate between soft and hard ingredients.
• Do not overfill the feeder chute. Feed ingredients at a steady, slow pace.
• When juicing leafy greens, roll them into a tight ball before feeding.
• Use the coarse strainer for softer fruits like berries or when you prefer juice with more pulp.

Care and Cleaning

Proper cleaning and maintenance will extend the life of your juicer and ensure optimal performance.

After Each Use:

1. Turn off the juicer and unplug it from the power outlet.
2. Disassemble the juicer in reverse order of assembly: remove the hopper, auger, strainer, spinning brush, and juice bowl.
3. Rinse all removable parts (hopper, auger, strainer, spinning brush, juice bowl, juice cap, containers) under running water immediately after use to prevent pulp from drying.
4. Use the provided cleaning brush to thoroughly clean the strainer, especially the fine mesh, to remove any trapped pulp.
5. Wipe the motor base with a damp cloth. Never submerge the motor base in water.
6. Dry all parts completely before reassembling or storing.

Important Notes:

• The removable parts are not dishwasher safe. Hand washing is recommended to preserve the integrity of the materials.
• Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the parts.

Troubleshooting Guide

Refer to this table for common issues and their solutions.

Technical Specifications

Detailed specifications for the Hurom HU-100SB Masticating Slow Juicer Machine.

Warranty and Customer Support

Your Hurom HU-100SB Masticating Slow Juicer Machine comes with the following warranty:

• Motor: 5-year limited warranty.
• Parts: 1-year limited warranty.

For warranty claims, technical assistance, or customer support, please refer to the contact information provided with your purchase documentation or visit the official Hurom website.