Timco DW-9600

Timco DW-9600 Rechargeable Shaver and Epilator User Manual

1. Introduction

Welcome to the user manual for your Timco DW-9600 Rechargeable Shaver and Epilator. This device is designed for efficient and convenient hair removal, offering both shaving and epilation functions. It features an interchangeable head, a spot light for enhanced visibility, and comes with a cleaning brush and a protective case.

Please read this manual thoroughly before first use to ensure safe operation, optimal performance, and proper maintenance of your device. Keep this manual for future reference.

2. Product Overview

Key Features

  • Rechargeable design for cordless operation.
  • Interchangeable heads for versatile shaving and epilation.
  • Integrated Spot Light for improved visibility of fine hairs.
  • Compact and ergonomic design.

Package Contents

  • Timco DW-9600 Main Unit
  • Epilator Head
  • Shaver Head (interchangeable)
  • Cleaning Brush
  • Storage Case
  • Charging Cable (not explicitly listed but implied by 'rechargeable')
Timco DW-9600 Epilator and Shaver with accessories
Image 1: The Timco DW-9600 device shown with its interchangeable shaver head, cleaning brush, and pink storage pouch.

3. Setup

Charging the Device

  1. Before first use, fully charge the device for approximately 8 hours.
  2. Connect the charging cable to the charging port on the device and plug the other end into a suitable power source.
  3. The charging indicator light will illuminate during charging.
  4. Once fully charged, disconnect the device from the power source.

Attaching and Changing Heads

  1. Ensure the device is turned off before changing heads.
  2. To remove a head, gently pull it upwards from the main unit.
  3. To attach a head, align it with the main unit and press down until it clicks securely into place.
Close-up of the Timco DW-9600 epilator head
Image 2: A detailed view of the epilator head, showing the rotating tweezers.
Side view of the Timco DW-9600 epilator showing model number
Image 3: Side profile of the Timco DW-9600, displaying the model number DW-9600 and charging specifications.

4. Operating Instructions

General Use

  1. Ensure your skin is clean and dry before use.
  2. Turn on the device using the power switch.
  3. The integrated spot light will activate, illuminating the area for better visibility.
  4. Hold the device at a 90-degree angle to the skin and move it slowly against the direction of hair growth.
  5. Do not press too hard on the skin.
  6. After use, turn off the device and clean the head.

Using the Epilator Head

The epilator head is designed to remove hair from the root. For best results, ensure hair length is between 2-5mm. Epilation may cause some discomfort initially, which typically decreases with regular use.

Using the Shaver Head

The shaver head provides a close shave for sensitive areas or for quick touch-ups. Move the shaver gently over the skin in short, circular motions or against the direction of hair growth.

Timco DW-9600 epilator from another angle
Image 4: An alternative view of the Timco DW-9600 epilator, highlighting its ergonomic design.

5. Maintenance

Cleaning the Device

  1. Always turn off and unplug the device before cleaning.
  2. Remove the head from the main unit.
  3. Use the provided cleaning brush to remove any trapped hairs from the epilator or shaver head.
  4. The heads can be rinsed under running water. Ensure they are completely dry before reattaching or storing.
  5. Wipe the main unit with a dry or slightly damp cloth. Do not immerse the main unit in water.

Storage

Store the device and its accessories in the provided case in a cool, dry place, away from direct sunlight and out of reach of children.

6. Troubleshooting

  • Device not turning on: Ensure the device is fully charged. Check if the power switch is in the 'on' position.
  • Reduced performance/pulling hair: The head might be clogged with hair. Clean the head thoroughly using the cleaning brush. Ensure the head is correctly attached.
  • Charging indicator not lighting up: Check the charging cable connection and the power source. Ensure the cable is not damaged.
  • Battery life is short: Battery performance can decrease over time. Ensure the device is fully charged before each use.

7. Specifications

SpecificationDetail
Model NumberDW-9600
BrandTimco
Power SourceBattery Powered
Dimensions17 x 3 x 12 cm
Weight200 g
Components IncludedCleaning Brush and Case
Country of OriginUnited States

8. Warranty and Support

For information regarding warranty coverage, please refer to the warranty card included with your product or contact Timco customer support directly. Keep your purchase receipt as proof of purchase.

If you encounter any issues not covered in this manual or require further assistance, please contact Timco customer service through their official website or the contact information provided in your product packaging.

Related Documents - DW-9600

Preview Timco MT50D | MT90D Maantiivistäjä Käyttöohje
Tämä käyttöohje tarjoaa yksityiskohtaiset tiedot Timco MT50D ja MT90D maantiivistäjien turvallisesta käytöstä, asennuksesta, huollosta ja vianetsinnästä. Opi maksimoimaan laitteesi suorituskyky ja käyttöikä.
Preview TIMCO 2000i Digitaali Aggregaatti Käyttäjän Käsikirja
Tämä käyttäjän käsikirja tarjoaa tärkeää tietoa TIMCO 2000i digitaaliaggregaatin turvalliseen käyttöön, huoltoon ja vianmääritykseen.
Preview TIMCO ATV 2000 kg Tukkikärry Käyttöohje
Tämä käyttöohje kattaa TIMCO ATV 2000 kg tukkikärryn, timmervagnin ja log trailerin turvallisen käytön, asennuksen ja huollon. Suunniteltu yksityiseen maastokäyttöön.
Preview Timco 8T halkomakone jaloilla 230V Käyttöohje
Timco 8T -puunhalkomakoneen (230V) käyttöohje, joka sisältää tietoa turvallisuudesta, käytöstä, teknisistä tiedoista ja huollosta kotitalouskäyttöön.
Preview TIMCO ATV 28T Käyttöohje ja Turvallisuusopas
Tämä käyttöohje tarjoaa yksityiskohtaiset ohjeet TIMCO ATV 28T -halkomakoneen kokoamiseen, käyttöön, huoltoon ja turvallisuuteen. Opi käyttämään laitetta turvallisesti ja tehokkaasti.
Preview Timco Oil-Free Compressor Operating Instructions - Models 103071161, 103071174, 102298050
Comprehensive operating instructions for Timco oil-free piston compressors. Covers product structure, safe usage, storage, maintenance, troubleshooting, and includes a pneumatic diagram for models 103071161, 103071174, and 102298050.