Vaxcel X0027 Smart Lighting Low Profile Under Cabinet Linking Cable

1. Introduction

Thank you for choosing the Vaxcel X0027 Smart Lighting Low Profile Under Cabinet Linking Cable. This 48-inch black finish cable is designed to seamlessly connect Vaxcel under cabinet LED lighting fixtures, allowing for extended and customized lighting installations. Its low-profile design ensures a discreet and clean appearance in various indoor settings, particularly under cabinets.

This manual provides essential information for the safe and proper installation, operation, and maintenance of your linking cable. Please read it thoroughly before use and retain it for future reference.

2. Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury to persons, strictly follow these instructions.

• Always disconnect power at the circuit breaker before installing or servicing the cable or connected lighting fixtures.
• This product is intended for indoor use only.
• Ensure the cable is not pinched or damaged during installation. Damaged cables can cause electrical hazards.
• Do not exceed the maximum wattage or current rating of the connected lighting system. Refer to the specifications of your Vaxcel lighting fixtures.
• This cable is ETL listed for damp locations, but avoid direct exposure to water or excessive moisture.
• Consult a qualified electrician if you are unsure about any part of the installation process.

3. Package Contents

Verify that all components are present and undamaged upon opening the package. If any parts are missing or damaged, contact Vaxcel customer support.

• 1 x Vaxcel X0027 Low Profile Under Cabinet Linking Cable (48 inches, Black Finish)

Figure 3.1: Vaxcel X0027 Linking Cable. This image shows the 48-inch black cable with its male-to-male connectors at both ends, designed for connecting under cabinet lighting fixtures.

4. Setup and Installation

This linking cable is designed for easy connection between compatible Vaxcel under cabinet LED lighting fixtures. Ensure that the power to the lighting system is OFF before proceeding with installation.

1. Prepare the Lighting Fixtures: Ensure your Vaxcel under cabinet LED lighting fixtures are properly installed and ready for interconnection. Refer to the instruction manual of your specific lighting fixtures for their installation details.
2. Align Connectors: Locate the male and female connection ports on your Vaxcel lighting fixtures. The X0027 cable features male-to-male connectors. You will need fixtures with female ports to connect this cable.
3. Connect the Cable: Gently insert one end of the X0027 linking cable into the appropriate female port of the first lighting fixture. Ensure a secure and snug fit.
4. Extend Connection: Connect the other end of the X0027 linking cable to the female port of the next lighting fixture you wish to link.
5. Secure Cabling: Route the cable neatly and securely, avoiding any areas where it might be pinched, cut, or exposed to excessive heat or moisture. Use cable clips or ties if necessary to maintain a clean installation.
6. Test System: Once all connections are made and secured, restore power to the lighting system at the circuit breaker and test the functionality of your linked lights.

Note: This cable is specifically designed for Vaxcel Smart Lighting Low Profile Under Cabinet LED fixtures. Compatibility with other brands or types of lighting is not guaranteed.

5. Operation

The Vaxcel X0027 linking cable is a passive component designed to transmit power and signals between compatible Vaxcel under cabinet lighting fixtures. It does not have active operational controls.

Once properly installed, the cable facilitates the operation of your linked lighting system as controlled by the primary power source or switch connected to your Vaxcel lighting fixtures. Refer to the user manual of your Vaxcel lighting fixtures for details on their specific operation (e.g., dimming, color temperature adjustment, smart controls).

6. Maintenance

The Vaxcel X0027 linking cable requires minimal maintenance. Follow these guidelines to ensure its longevity and proper function:

• Cleaning: Ensure power is disconnected before cleaning. Wipe the cable gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the cable's finish and insulation.
• Inspection: Periodically inspect the cable for any signs of wear, fraying, cuts, or damage to the connectors. If any damage is observed, disconnect the cable immediately and replace it to prevent electrical hazards.
• Environment: While rated for damp locations, avoid prolonged exposure to extreme temperatures, direct sunlight, or excessive moisture.

7. Troubleshooting

If you experience issues with your Vaxcel X0027 linking cable or the connected lighting system, refer to the following common troubleshooting steps:

If the problem persists after trying these solutions, please contact Vaxcel customer support for further assistance.

8. Specifications

9. Warranty and Support

Vaxcel products are manufactured to high-quality standards. For specific warranty information regarding your Vaxcel X0027 linking cable, please refer to the warranty documentation included with your primary Vaxcel lighting fixture or visit the official Vaxcel website.

For technical support, troubleshooting assistance beyond what is provided in this manual, or to inquire about replacement parts, please contact Vaxcel customer service:

• Website: Visit the VAXCEL Store on Amazon (or official Vaxcel website if available)
• Phone: Refer to Vaxcel's official website for current contact numbers.
• Email: Refer to Vaxcel's official website for current contact email.

When contacting support, please have your product model number (X0027) and purchase information readily available.