Daylight Stitchsmart Stand 2 Instruction Manual

1. Introduction

The Daylight Stitchsmart Stand 2 is an adjustable stand designed to hold embroidery hoops and frames, providing a hands-free experience for various needlework projects. This manual provides essential information for the safe and effective use of your Stitchsmart Stand 2.

2. Safety Information

• Ensure all components are securely fastened before use to prevent accidental falls or damage.
• Keep small parts away from children to avoid choking hazards.
• Do not overload the stand with excessive weight beyond its intended purpose.
• Place the stand on a stable, flat surface to prevent tipping.

3. Package Contents

Verify that all the following components are included in your package:

• Stitchsmart Stand (main frame and base)

Note: Embroidery frames, hoops, fabric, needles, thread, and optional accessories like magnifiers or chart holders are not included with the stand and must be purchased separately.

4. Setup and Assembly

The Stitchsmart Stand 2 is designed for quick and easy assembly. Follow these steps to set up your stand:

1. Unpack all components from the box and lay them out on a clean, flat surface.
2. Assemble the base and vertical support pole. Ensure all connections are tight.
3. Attach the adjustable frame clamp to the top of the vertical support pole.
4. Insert your embroidery hoop or frame into the clamp. Adjust the clamp's tightness to securely hold your work without damaging it.

Setup Video

5. Operating Instructions

The Stitchsmart Stand 2 offers flexibility and convenience for your needlework:

• Adjustable Height: Loosen the knob on the vertical pole to adjust the stand to your preferred working height, whether seated on a chair or sofa. Tighten the knob to secure the height.
• 360° Rotation: The unique swivel system allows you to effortlessly rotate your frame a full 360 degrees. This feature is useful for accessing the back of your work or adjusting the angle for optimal comfort and visibility.
• Secure Grip: The strong jaw clamp ensures your embroidery frame or hoop remains firmly in position, allowing for hands-free stitching. The maximum clamp opening is 1.6 inches, accommodating various frame sizes.

Product Overview Video

6. Maintenance

• Regularly check all screws and knobs to ensure they are tight.
• Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Store the stand in a dry place when not in use. It can be folded for compact storage.

7. Troubleshooting

• Stand feels unstable: Ensure the base is fully extended and placed on a flat surface. Check that all connection points and adjustment knobs are securely tightened.
• Hoop/Frame slips: Tighten the jaw clamp firmly around your hoop or frame. If the material is very thin, you may add a small piece of fabric or non-slip material between the clamp and your work for a more secure grip.
• Difficulty adjusting height/angle: Loosen the relevant adjustment knob sufficiently before attempting to change the position. Do not force adjustments.

8. Specifications

9. Warranty

The Daylight Stitchsmart Stand 2 comes with a 2-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and procedures, refer to the documentation included with your product or contact Daylight Company customer support.

10. Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official Daylight Company website or contact their customer service department. Contact information can typically be found on the product packaging or the company's official website.