Evenflo Grand Trip Stroller Instruction Manual

1. Important Safety Information

Please read and understand all instructions and warnings before assembling and using your Evenflo Grand Trip Stroller. Failure to follow these instructions could result in serious injury or death to your child. Keep this manual for future reference.

• Never leave child unattended: Always keep your child in view when in the stroller.
• Secure your child: Always use the 5-point harness system. Ensure it is properly adjusted and securely fastened.
• Engage brakes: Always engage the brakes when parking the stroller.
• Avoid overloading: Do not place more than the recommended weight in the storage basket or on the handle. Overloading can cause the stroller to tip.
• Folding/Unfolding: Keep children clear of the stroller when folding or unfolding to prevent finger entrapment.
• Weight Limits: This stroller is designed for children from 2.2 kg (4.8 lbs) up to 18 kg (40 lbs). Do not exceed this weight limit.
• Check for damage: Before each use, inspect the stroller for loose parts, damaged components, or sharp edges. Do not use if damaged.
• Stairs and Escalators: Do not use the stroller on stairs or escalators.

2. Package Contents

Verify that all components are present before beginning assembly:

• Stroller Frame with Fabric Seat and Canopy
• 2 Front Wheels
• 2 Rear Wheels
• Rear Wheel Axle
• 4 Washers
• 2 Wheel Caps
• 2 Fork Pins
• Child Tray

3. Assembly Instructions

Follow these steps to assemble your Evenflo Grand Trip Stroller. For a visual guide, please refer to the assembly video below.

1. Step 1: Assemble Rear Brakes
   Insert the rear brake components onto the metal axle. Ensure they are securely in place.
   

   Image: A hand inserting a brake component onto the metal axle, part of the rear wheel assembly.

2. Step 2: Attach Rear Wheels
   On each side of the axle, place two washers, then slide on a rear wheel. Secure the wheel with a fork pin and then a wheel cap. Repeat for the other side.
   

   Image: A hand securing a rear wheel onto the axle using washers and a pin.

3. Step 3: Unfold Stroller Frame
   Stand the folded stroller upright. Release the safety latch and carefully unfold the stroller frame until it locks into the open position. Ensure all locking mechanisms are engaged.
   

   Image: The Evenflo Grand Trip Stroller fully unfolded and ready for use.

4. Step 4: Adjust Seat and Canopy
   Adjust the seat to your desired recline position. Lower the canopy and secure it to provide shade for your child.
   

   Image: The stroller with its canopy extended, showing the seat in an upright position.

5. Step 5: Attach Rear Wheel Assembly to Frame
   Align the assembled rear wheel axle with the designated slots on the stroller frame and push firmly until it clicks into place.
   

   Image: The stroller with the rear wheel assembly attached to the main frame.

6. Step 6: Secure the Handle
   Ensure the handle is properly aligned and secured to the stroller frame. Check that it is firm and does not wobble.
   

   Image: A side view of the Evenflo Grand Trip Stroller, highlighting the handle.

7. Step 7: Insert Front Wheels
   Insert the two front wheels into their respective sockets on the front of the stroller frame until they click securely into place. Test their rotation.
   

   Image: A hand inserting one of the front wheels into the stroller's front leg.

8. Step 8: Attach Child Tray
   Attach the child tray to the designated slots on the front of the stroller. Ensure it is firmly attached and secure.
   

   Image: The Evenflo Grand Trip Stroller with the child tray in place.

4. Operating Instructions

4.1 Reversible Handle

The Evenflo Grand Trip Stroller features a reversible handle, allowing you to easily change the direction your child faces. To reverse the handle, lift the lateral levers on both sides of the handle and swing the handle over to the opposite side until it locks securely into place.

4.2 5-Point Harness System

Always secure your child with the 5-point harness system. Place your child in the seat, bring the shoulder straps over their shoulders, and the waist straps around their waist. Insert the buckle tongues into the central buckle until they click. Adjust the straps for a snug fit, ensuring no more than one finger can fit between the strap and your child's body.

4.3 Reclining Positions

The stroller offers three reclining positions for your child's comfort. To adjust the recline, locate the recline mechanism on the back of the seat. Squeeze the lever or press the button and adjust the seat to the desired angle. Ensure the seat is securely locked in the chosen position before placing your child in it.

4.4 Canopy Adjustment

The canopy is foldable and removable, designed to protect your child from the sun. To adjust, simply push or pull the canopy to extend or retract it. To remove, locate the attachment points and unfasten them.

4.5 Brakes

The stroller is equipped with brakes on the rear wheels. To engage the brakes, press down firmly on the brake levers located near each rear wheel until they lock. To release, lift the levers. Always engage both brakes when the stroller is stationary.

5. Folding the Stroller

Follow these steps to fold your Evenflo Grand Trip Stroller for storage or transport. For a visual guide, please refer to the assembly video above.

1. Step 1: Engage Rear Wheel Locks
   Before folding, ensure both rear wheel brakes are engaged to prevent the stroller from moving.
2. Step 2: Fold the Canopy
   Retract and fold the canopy completely.
3. Step 3: Release Frame Lock and Fold
   Locate the folding mechanism (usually a lever or button on the side of the frame). Activate the mechanism and gently push the handle forward and down to begin folding the stroller.
4. Step 4: Secure the Structure
   Once folded, ensure the stroller's frame is secured with the designated latch to prevent accidental unfolding.

6. Maintenance

6.1 Cleaning

Clean the stroller fabric with a mild soap and cold water solution. Do not use bleach. Air dry. The frame can be wiped clean with a damp cloth and mild soap. Dry thoroughly.

6.2 Wheel Maintenance

Regularly check the wheels for debris and remove any dirt or hair that may impede their movement. Lubricate axles periodically with a silicone-based lubricant if needed.

6.3 General Care

Store the stroller in a dry place away from direct sunlight to prevent fading and material degradation. Periodically check all fasteners and connections to ensure they are secure.

7. Troubleshooting

• Stroller not folding/unfolding smoothly: Ensure all locking mechanisms are disengaged/engaged correctly. Check for any obstructions in the folding joints.
• Wheels squeaking or not turning: Clean the wheels and axles. Apply a small amount of lubricant if necessary. Ensure no debris is caught in the wheel mechanism.
• Harness not securing: Check that the buckle tongues are fully inserted into the central buckle. Ensure straps are not twisted and are adjusted correctly.
• Stroller feels unstable: Verify that the frame is fully unfolded and all locking mechanisms are engaged. Do not exceed the maximum weight capacity.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Evenflo website. Keep your proof of purchase for any warranty claims.

Evenflo Customer Service: www.evenflo.com